*************************************************************************** ********************** D720200 Design Resources Release ******************* ***** All of the Software are under NDA or Software license agreement ***** *************************************************************************** Release Note October.6.2009 NEC Electronics uPD720200 USB 3.0 Host Controller Driver Kit (x86 and x64) for Windows XP, VISTA and 7 Kit Version : 1.0.14.0 : October 6th, 2009 Copyright (C) NEC Electronics Corporation 2009 All Rights Reserved *************************************************************************** NOTE1: This installer package is generated with the InstallShield2010. If the previous driver package(v0.X.X.X , v1.0.1.0 or v1.0.7.0) is installed, please uninstall the previous driver package and install new package. NOTE2: Updated End User Licence Agreement. --------------------------------------------------------------------------- Table of Contents --------------------------------------------------------------------------- 1. Release Files 2. How to install 3. History --------------------------------------------------------------------------- 1. Release Files --------------------------------------------------------------------------- Date Time Size File Name Version --EXE(Installer Package) 2009/10/01 20:30 7418KB NECEL-USB3-Host-Driver-10140-setup.exe 1.0.14.0 2009/09/11 16:06 1KB setup.iss 2009/10/01 18:02 953KB InstallShield 2010 Projects-091002.zip --ZIP 2009/10/01 18:05 6943KB NECEL-USB3-Host-Driver-10140-Setup-x86-x64-Binary.zip 1.0.14.0 ---contents 2009/09/11 9:10 21KB 0x0C04.ini 2009/09/11 14:50 21KB 0x2C0a.ini 2009/05/20 16:30 24KB 0x040a.ini 2009/03/18 15:05 22KB 0x040b.ini 2009/05/20 17:27 25KB 0x040c.ini 2009/03/16 14:23 18KB 0x040d.ini 2009/03/18 15:07 22KB 0x040e.ini 2009/05/20 16:46 22KB 0x041b.ini 2009/05/20 16:46 22KB 0x041d.ini 2009/03/18 15:15 22KB 0x041e.ini 2009/05/20 16:58 22KB 0x041f.ini 2009/05/20 16:55 19KB 0x0401.ini 2009/05/21 17:44 11KB 0x0404.ini 2009/05/20 17:03 22KB 0x0405.ini 2009/05/20 17:03 23KB 0x0406.ini 2009/05/20 17:22 25KB 0x0407.ini 2009/03/18 15:26 26KB 0x0408.ini 2009/05/21 15:53 21KB 0x0409.ini 2009/05/20 17:06 24KB 0x0410.ini 2009/06/08 16:45 15KB 0x0411.ini 2009/03/16 14:28 14KB 0x0412.ini 2009/05/20 17:07 24KB 0x0413.ini 2009/05/20 17:08 23KB 0x0414.ini 2009/05/20 17:09 23KB 0x0415.ini 2009/05/20 17:09 23KB 0x0416.ini 2009/05/20 17:12 22KB 0x0419.ini 2009/05/20 17:13 23KB 0x0424.ini 2009/05/21 17:44 11KB 0x0804.ini 2009/05/20 17:14 24KB 0x0816.ini 2009/10/01 10:30 89KB 1025.mst 2009/10/01 10:30 80KB 1028.mst 2009/10/01 10:30 98KB 1029.mst 2009/10/01 10:30 98KB 1030.mst 2009/10/01 10:30 109KB 1031.mst 2009/10/01 10:30 109KB 1032.mst 2009/10/01 10:30 34KB 1033.mst 2009/10/01 10:30 106KB 1034.mst 2009/10/01 10:30 99KB 1035.mst 2009/10/01 10:30 107KB 1036.mst 2009/10/01 10:30 56KB 1037.mst 2009/10/01 10:30 103KB 1038.mst 2009/10/01 10:30 107KB 1040.mst 2009/10/01 10:30 102KB 1041.mst 2009/10/01 10:30 95KB 1042.mst 2009/10/01 10:30 103KB 1043.mst 2009/10/01 10:30 96KB 1044.mst 2009/10/01 10:30 102KB 1045.mst 2009/10/01 10:30 101KB 1046.mst 2009/10/01 10:30 98KB 1049.mst 2009/10/01 10:30 99KB 1051.mst 2009/10/01 10:30 95KB 1053.mst 2009/10/01 10:30 94KB 1054.mst 2009/10/01 10:30 97KB 1055.mst 2009/10/01 10:30 100KB 1060.mst 2009/10/01 10:30 79KB 2052.mst 2009/10/01 10:30 102KB 2070.mst 2009/10/01 10:30 35KB 3076.mst 2009/10/01 10:30 35KB 11274.mst 2009/10/01 10:29 4856KB ISSetup.dll 2009/10/01 10:44 781KB nusb3drv.msi 2009/10/01 10:41 967KB setup.exe 2009/10/01 10:30 3KB Setup.ini 2009/09/11 16:06 1KB setup.iss ----Files 2009/09/25 22:58 84KB nusb3mon.dll 1.0.14.0 2009/09/25 22:59 104KB nusb3mon.exe 1.0.14.0 2009/09/04 20:33 292KB nusb3utl.exe 1.0.12.0 2009/09/28 10:16 52KB nusb3ver.dll 1.0.14.0 -----0C0A 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0C04 2009/09/25 22:59 2KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----2C0A 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----040A 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----040B 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----040C 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----040D 2009/09/25 23:00 3KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----040E 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----041B 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----041D 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----041E 2009/09/25 22:59 3KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----041F 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0401 2009/09/25 22:59 3KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0404 2009/09/25 22:59 3KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0405 2009/09/25 23:00 3KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0406 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0407 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0408 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0409 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:33 3KB nusb3utl.exe.mui -----0410 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0411 2009/09/25 22:59 3KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0412 2009/09/25 22:59 3KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0413 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0414 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0415 2009/09/25 22:59 3KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0416 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0419 2009/09/25 22:59 4KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0424 2009/09/25 22:59 3KB nusb3mon.exe.mui 2009/09/04 20:33 2KB nusb3utl.exe.mui -----0804 2009/09/25 23:00 3KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----0816 2009/09/25 23:00 4KB nusb3mon.exe.mui 2009/09/04 20:34 2KB nusb3utl.exe.mui -----x64 2009/09/30 7:25 8KB nusb3drv.cat 2009/09/25 22:46 4KB nusb3drv.inf 2009/09/25 22:58 72KB nusb3hub.sys 1.0.14.0 2009/09/25 22:58 175KB nusb3xhc.sys 1.0.14.0 -----x86 2009/09/30 7:25 8KB nusb3drv.cat 2009/09/25 22:46 3KB nusb3drv.inf 2009/09/25 22:57 56KB nusb3hub.sys 1.0.14.0 2009/09/25 22:57 135KB nusb3xhc.sys 1.0.14.0 --------------------------------------------------------------------------- 2. How to Silent Install --------------------------------------------------------------------------- 1)Silent install setup /s -To install this driver package silently, "setup.iss" file is needed. This package includes the "setup.iss" in which the following folder path is set. "C:\Program Files\NEC Electronics\USB 3.0 Host Controller Driver". If you want to change install path, you need to generate setup.iss as follows: setup /r /f1".\setup.iss" --------------------------------------------------------------------------- 3. History --------------------------------------------------------------------------- --------------------------------------------------------------------------- Version 1.0.14.0 : October 6th, 2009 --------------------------------------------------------------------------- - This version includes the CAT files signed by Microsoft Windows Hardware Compatibility Publisher. This device driver is complianced with WHQL certification as Unclassified Category on Windows XP, Vista & 7. The Submission ID of WHQL certification is 1358042. - The following bug fixed. 1. If the USB Device having multiple Endpoints with same EndpointAddress, the USB Device is not enumulated. 2. The USB2.0 Device connected with mulitiple layered USB2.0 HUB is not detected after resuming Sleep and Hibernate. - Updated InstallShield project file, script file, customDLL & versionDLL. - Added the following functions to this installer. 1. Command line option for checking existence of USB3.0 Host Controller. /v"CHECK_HW_EXIST=1" When this command line option is set, the installer checks existence of the USB3.0 Host Controller(uPD720200). If the uPD720200 is not in the PC, this installer does not install the device drivers. ##Caution## To install the device drivers with this command line option after uninstalling the device drivers, it is necessary to restart on the PC. 2. Previously, this installer does not install device drivers to the PC in which device drivers with same version is already installed. In this version, it reinstalls the device drivers to the PC. --------------------------------------------------------------------------- Version 1.0.12.0 : September 11th, 2009 --------------------------------------------------------------------------- - Updated End User Licence Agreement. - This version includes the CAT files signed by Microsoft Windows Hardware Compatibility Publisher. This device driver is complianced with WHQL certification as Unclassified Category on Windows XP, Vista & 7. The Submission ID of WHQL certification is 1349589. - This package includes "Install Shield 2010 Project Files" in the EXE folder with which any cusotmers can customize install package. - Installer Wizard Messages, "nusb3mon.exe" and "nusb3utl.exe" support the following languages. LCID : Language 0401 : Arabic 0404 : Traditional Chinese 0405 : Czech 0406 : Danish 0407 : German 0408 : Greek 0409 : English 040A : Spanish (Traditional) 040B : Finnish 040C : French 040D : Hebrew 040E : Hungarian 0410 : Italian 0411 : Japanese 0412 : Korean 0413 : Dutch 0414 : Norwegian (Bokmal) 0415 : Polish 0416 : Portuguese (Brazilian) 0419 : Russian 041B : Slovak 041D : Swedish 041E : Thai 041F : Turkish 0424 : Slovenian 0804 : Simplified Chinese 0816 : Portuguese(Standard) 0C04 : Chinese (Hong Kong) 0C0A : Spanish (Modern) 2C0A : Spanish (Latin America) - The following bug fixed. 1. Bluescreen sometimes occurs when starting WebCam application. 2. The mouse supported SelectiveSuspend function does not work when it wakes up from suspend state. 3. Can't access CD-ROM Media in a Blu-Ray Drive. - Optimized SS/HS bulk transfer performance --------------------------------------------------------------------------- Version 1.0.10.0 : August 26th, 2009 --------------------------------------------------------------------------- - This version includes the CAT files signed by Microsoft Windows Hardware Compatibility Publisher. This device driver is complianced with WHQL certification as Unclassified Category on Windows XP, Vista & 7. The Submission ID of WHQL certification is 1346130. - All of files except for the CAT files are same as Version1.0.10.0 Beta2 --------------------------------------------------------------------------- Version 1.0.10.0Beta2 : August 24th, 2009 --------------------------------------------------------------------------- - This version includes Microsoft TestSigned CAT Files. Note: If this driver package is used on x64 Windows Vista/7, need to set the following command. >bcdedit -set TESTSIGNING ON - This installer package is generated with the InstallShield2010. If the previous driver package(v0.X.X.X , v1.0.1.0 or v1.0.7.0) is installed, please uninstall the previous driver package and install new package. - Installer Wizard Messages, "nusb3mon.exe" and "nusb3utl.exe" support the following languages. LCID : Language 404 : Traditional Chinese 407 : German 409 : English 40A : Spanish 40C : French 410 : Italian 411 : Japanese 412 : Korean 413 : Dutch 804 : Simplified Chinese 816 : Portuguese(Standard) - The following bug fixed. 1. Some hub devices does not detected after resuming Sleep and Hibernate. 2. Bluescreen occurs after resuming Sleep and Hibernate. - Known issue. This issue will fixed at next version. 1. Bluescreen sometimes occurs when strting WebCam application. --------------------------------------------------------------------------- Version 1.0.7.0Beta : July 17th, 2009 --------------------------------------------------------------------------- - The following bug fixed. 1. USB Devices are not detected after resuming from Sleep and Hibernate. 2. Bluescreen occurs after resuming from Sleep and Hibernate. 3. USB-VGA Devices does not work correctly. 4. The message that bandwidth is getting low might not be indicated. -The following function Added 1. Add a Vender Defined Command. --------------------------------------------------------------------------- Version 1.0.1.0Beta : June 15th, 2009 --------------------------------------------------------------------------- - This package includes the following applications. 1. nusb3mon.exe This application provides the following function USB3.0 Specificatin Section 11.1 indicates the follwoing function. To address the situation where a USB 3.0 device is connected to a USB 2.0-only port on a USB 3.0- capable host, after establishing a USB 2.0 high-speed connection with the device, it is recommended that the host inform the user that the device will support SuperSpeed operation if it is moved to a USB 3.0-capable port on the same host. If a USB 3.0 device is connected to a USB 3.0- capable host via a USB 2.0 hub, it is recommended that the host inform the user that the device will support SuperSpeed operation if it is moved to an appropriate host port or if the hub is replaced with a USB 3.0 hub. 2. nusb3ver.exe This application provides functions that shows Driver Version and Firmware Version. - The following bug fixed. 1. Function driver is not unloaded after resuming from Sleep and Hibernate. 2. USB Remote wake up function is not worked correctly. 3. Bluescreen occured when repeating hot-pulg of FS-Speaker Device that is connected with HS-Hub that is connected with USB3.0 HC. --------------------------------------------------------------------------- Version 0.9.12.0Beta : May 29th, 2009 --------------------------------------------------------------------------- - Changed installer package configuration. 1. EXE type *All files are included in the EXE file. *Combined x86 and x64 in one package. 2. ZIP type *Conposed of 3 contents, setup.exe, x86 folder and x64 folder. *All files for x86 are in x86 folder. *All files for x64 are in x64 folder. *Setup.exe installs drivers automatically. --------------------------------------------------------------------------- Version 0.9.12.0Beta : May 27th, 2009 --------------------------------------------------------------------------- - The following bug fixed. 1. Function driver is not unloaded after resuming from Sleep and Hibernate. 2. When repeating hot-pulg of a USB2.0 device, the device is not detected. 3. When connecting two USB Devices and after resuming from Sleep and Hibernate, both devices is not detected. 4. Bluescreen occuerd when USB-VGA device is running. 5. Dual Display mode of a USB-VGA device can't be operated. --------------------------------------------------------------------------- Version 0.9.4.0Beta : March 27th, 2009 --------------------------------------------------------------------------- - Support for Super Speed Transactions --------------------------------------------------------------------------- Version 0.9.3.0Beta : March 9th, 2009 --------------------------------------------------------------------------- - The following bug fixed. 1. If the system is booted up with a USB device already present on the USB port, the USB port is in-operative and cannot be recovered even if the USB device is unplugged and then plugged back in. --------------------------------------------------------------------------- Version 0.9.0.0Beta : February 9th, 2009 --------------------------------------------------------------------------- - First Beta Version Release ---------------------------------------------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.