readme.txt Driver File Contents (s113vidx.exe)

************************************************************
*
*
*  Production version Release
*  Intel(R) Extreme Graphics Driver
*  Microsoft* Windows* 2000, Microsoft* Windows* XP
*  Driver Revision: 6.13.01.3413
*  Package: 15245 
*
*  12.0 Production Version 
*
* January 10 2003
*              
*	NOTE:  This document refers to systems containing the 
*         following Intel products:   
*
*	 Intel(R) 830M Chipset                                
*	 Intel(R) 830MP Chipset                               
*	 Intel(R) 830MG Chipset                               
*	 Intel(R) 845G Chipset                                
*	 Intel(R) 855GM Chipset                               
*	 Intel(R) 845GL Chipset                               
*	 Intel(R) 845GE Chipset                               
*	 Intel(R) 852GM Chipset                               
*	 Intel(R) 845GV Chipset                               
*	                               
*	
* 
*  Installation Information
*
*  This document makes references to products developed by
*  Intel. There are some restrictions on how these products
*  may be used, and what information may be disclosed to
*  others. Please read the Disclaimer section and contact
*  your Intel field representative if you would like more
*  information.
*
************************************************************
************************************************************
*  DISCLAIMER: Intel is making no claims of usability,
*  efficacy or warranty.  The INTEL SOFTWARE LICENSE
*  AGREEMENT contained herein completely defines the license
*  and use of this software.
*
*  This document contains information on products in the 
*  design phase of development. The information here is 
*  subject to change without notice. Do not finalize a 
*  design with this information.
************************************************************
************************************************************

************************************************************
*  CONTENTS OF THIS DOCUMENT
************************************************************

This document contains the following sections:

1.  System Requirements
2.  Localized Language Abbreviations
3.  Installing the Software
4.  Verifying Installation of the Software
5.  Identifying the Software Version Number
6.  Uninstalling the Software
7.  Installation Switches Available

************************************************************
* 1.  SYSTEM REQUIREMENTS
************************************************************

1.  The system must contain one of the following Intel
    Chipsets:

 	 Intel(R) 830M Chipset                                
	 Intel(R) 830MP Chipset                               
	 Intel(R) 830MG Chipset                               
	 Intel(R) 845G Chipset                                                                 
	 Intel(R) 845GL Chipset                               
	 Intel(R) 845GE Chipset
	 Intel(R) 845GV Chipset                                 
	 Intel(R) 852GM Chipset                                
	 Intel(R) 855GM Chipset 
                               
 	                            	

2.  The software should be installed on systems with at
    least 128 MB of system memory.

3.  There should be sufficient hard disk space in the <TEMP>
    directory on the system in order to install this
    software.

    The drivers included with this distribution package are
    designed to function with all released versions of
    Microsoft Windows 2000 and Microsoft Windows XP.

Please check with your system provider to determine the
operating system and Intel Chipset used in your system.

************************************************************
* 2.  LOCALIZED LANGUAGE ABBREVIATIONS
************************************************************

The following list contains the abbreviations of all
languages into which the driver has been localized. You may
have to refer to this section while using this document.

ara -> Arabic - Saudi Arabian
arb -> Arabic - Lebanon
chs -> Mainland Chinese
cht -> Traditional Chinese
csy -> Czechoslovakian
dan -> Danish
deu -> German
ell -> Greek
eng -> International English
enu -> English
esp -> Spanish
fin -> Finnish
fra -> French
frc -> French Canadian
heb -> Hebrew
hun -> Hungarian
ita -> Italian
jpn -> Japanese
kor -> Korean
nld -> Dutch
nor -> Norwegian
plk -> Polish
ptb -> Brazilian Portuguese
ptg -> Portuguese
rus -> Russian
sve -> Swedish
tha -> Thai
trk -> Turkish

************************************************************
* 3.  INSTALLING THE SOFTWARE
************************************************************

General Installation Notes:

1.  The operating system must be installed prior to the
    installation of the driver.

2.  This installation procedure is specific only to the 
    version of driver and installation file included in this
    release.
3.  This procedure assumes that all of the software
    associated with this release is located in the same
    directory.



MANUAL "HAVE-DISK" INSTALLATION INSTRUCTIONS
--------------------------------------------

To install from a Web download, you will download either a ZIP file or an EXE file from the Web.

a. If it is an EXE file, double-click the file you downloaded and specify a 
   location into which the  driver files will be extracted. Click "Unzip" and          
   the files will extract. Click "OK" on the next window, then click "Close". 

b. If it is a ZIP file, you must unzip it using a utility such as WinZip* or   
   PKZip*. 
      

Microsoft Windows* 2000 Installation Instructions
-------------------------------------------------

1.  Right click on "My Computer" icon and then click on "properties".

2.  Click on "Hardware" Tab and select "device manager". (NOTE: IF UPDATING
    DRIVER GO TO STEP 3B)

3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4)

3b. Select "Display adapters". Double click on the graphics controller shown.

4.  Click on "driver" tab and select "Update Driver".

5.  Click on the "Next" button.

6.  Select the following option: "Display a list of the known
    drivers for this device...". Click on the "Next" button.
    (NOTE: IF UPDATING DRIVER GO TO STEP 8)

7.  Select "Display adapters". Click on the "Next" button.

8.  Click on the "Have Disk..." button and then the "Browse"
    button.

9.  Enter the directory where you unzipped the file you downloaded,
    and then enter the "Graphics" subdirectory. Next enter the
    "Win2000" subdirectory. Highlight the "ialmnt5.INF"
    file. Click on the "Open" button. 

10. Click on the "OK" button. A window listing all of the
    available display types should open. Select the display
    adapter that your system contains and then click on the
    "Next" button. 

11. Click on the "Next" button. The operating system will install the driver.
    Click on the "Finish" button when done.

12. Click on the "Close" button and then click on the "Yes"
    button to reboot. The driver should now be loaded. 
    

To determine if the driver has been loaded correctly, refer to the Verifying Installation section below.



Microsoft Windows* XP Installation Instructions 
-----------------------------------------------

1.  Click "Start" then right click on "My Computer" icon and then click on   
    properties.

2.  Click on "Hardware" Tab and select "device manager". (NOTE: IF UPDATING    
    DRIVER GO TO STEP 3B)

3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4)

3b. Select "Display adapters" then Double click on the graphics controller 
    shown.  

4.  Click on "driver" tab and select "Update Driver".

5.  Select the following option: "Install from a list or
    specific location (Advanced)". Click on the "Next" button.

6.  Select the following option: "Don't search.  I will choose the driver to  
    install".  Click on the "Next" button. 
    (NOTE: IF UPDATING DRIVER GO TO STEP 8)

7.  Select "Display adapters". Click on the "Next" button.

8.  Click on the "Have Disk..." button and then the "Browse"
    button.

9.  Enter the directory where you unzipped the file you downloaded,
    and then enter the "Graphics" subdirectory. Next enter the
    "Win2000" subdirectory. Highlight the "ialmnt5.INF"
    file. Click on the "Open" button. 

10. Click on the "OK" button. A window listing all of the
    available display types should open. Select the display
    adapter that your system contains and then click on the
    "Next" button. 

11. Click on the "Next" button. The operating system will install the driver.
    Click on the "Finish" button when done.

12. Click on the "Close" button and then click on the "Yes"
    button to reboot. The driver should now be loaded. 

To determine if the driver has been loaded correctly, refer to the Verifying Installation 
section below.



AUTOMATED INSTALL USING SETUP.EXE
---------------------------------

1. Click the 'Start' button in the task bar, click 'Run' and then select 'Setup.exe' from 
   the hard drive directory where the driver files are stored.  The Install dialog will appear.

2. click 'Next' to continue.  

3. Read License Agreement and click Yes to proceed.
 
4. When the 'Setup COMPLETE' message appears click 'Finish' to restart your computer.

Setup install switches are listed in section 7 below.  


************************************************************
* 4.  VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
1.  Double Click on the "My Computer" icon, then double click on the
    "Control Panel" icon, and then double click on the "System"
    icon.

2.  Click on "Hardware" Tab and select "device manager". Click on the
    "Display Adapters" icon. The Intel Graphics Driver
    should be listed.  If not, the driver is not installed
    correctly. To check the version of the driver, refer to
    the section below.

************************************************************
* 5.  IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************

1.  Double Click on the "My Computer" icon, then double click on the
    "Control Panel" icon, and then double click on the "Display"
    icon.

2.  Select the "Settings" tab and then click on the
    "Advanced" button.

3.  Select the "Intel(R) Extreme Graphics" tab. The
    graphics driver version should be listed on this screen.

************************************************************
* 6.  UNINSTALLING THE SOFTWARE
************************************************************

NOTE: This procedure assumes the above installation process
was successful. This uninstallation procedure is specific
only to the version of the driver and installation files
included in this package.

1.  Click on the "My Computer" icon, then click on the
    "Control Panel" icon, and then click on the "Add/Remove
    Programs" icon.

2.  Select Intel(R) Extreme Graphics Driver Software

3.  Click the "Remove" button to uninstall the driver. 

************************************************************
* 7.  INSTALLATION SWITCHES AVAILABLE
************************************************************

The switches in the SETUP.EXE file will have the following
syntax. Switches are not case sensitive and may be
specified in any order (except for the -s switch). Switches
must be separated by spaces.

SETUP [-b] [-g{xx[x]}] [ [ -nocuidlg{xxxx},
[-nocuidlg{xxxx}]...] | -nodiag | -basic] [-overwrite]
[-nolic] [-bits x x_pixels x y_pixels x vert_refresh]
[-l{lang_value}] [-s] [-f2<path\logfile>]

GFX-INSTALL CUSTOMER SWITCHES

-b  Forces a system reboot after the installation completes.
In non-silent mode, the absence of this switch will prompt
the user to reboot. In silent mode, the absence of this
switch forces the Setup.exe to complete without rebooting
(the user must manually reboot to conclude the installation
process).

-g{xx[x]}  Forces the configuration of a specific language
version of the driver during the install.  The absence of
this switch will cause the installation to utilize the
language of the OS locale as its default.

-nocuidlg{xxxx}	 Suppresses the display of a specific CUI
dialog. This switch may be used multiple times to suppress
many dialogs on a single command line invocation.  The
absence of this switch means that CUI dialogs will be
displayed as specified in the INF 

-nodiag	 Suppresses the display of all CUI dialogs and CUI
tabs on the OS Display Property pages and disables the Intel
Graphics Technology Control Panel Applet. The absence of
this switch means that CUI dialogs will be displayed as
specified in the INF. Note: this switch functionality is
different from the PC4.0 

-nodiag switch functionality. The PC4.0 -nodiag switch is
functionally equivalent to the current "-basic" switch
(below).

-basic  Suppresses the display of all advanced CUI dialogs.
The absence of this switch means that advanced CUI dialogs
will be displayed as specified in the INF.

-overwrite  Installs the graphics driver regardless of the
version of previously installed driver.  In non-silent mode,
the absence of this switch will prompt the user to confirm
overwrite of a newer Intel Graphics driver. In silent mode,
the absence of this switch means that the installation will
abort any attempts to regress the revision of the Intel(R)
Extreme Graphics driver.

-nolic	Suppresses the display of the license agreement
screen. In non-silent mode, the absence of this switch will
only prompt the user to view and accept the license
agreement. The functionality of this switch is automatically
included during silent installations.

-bits x x_pixels x y_pixels x vert_refresh  Sets the four
default display parameters: bits per pixel, pixels per line,
pixels per column and vertical refresh rate.


INSTALLSHIELD* STANDARD SWITCHES

-l{lang_value}  The switch provided by InstallShield*
specifies the language used for the Gfx-Install user
interface. The absence of this switch will cause the
installation to utilize the language of the OS as its
default. Detailed requirements for the Install Dialog
language settings are given in the Install Dialog Language
section.

-s  Run in silent mode. The absence of this switch causes
the install to be performed in verbose mode.

-f2<path\logfile>  Specifies an alternate location and name
of the log file created by a silent install. By default,
Setup.log log file is created and stored during a silent
install in the same directory as that of Setup.ins.

************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
* (OEM/IHV/ISV Distribution & Single User)
************************************************************

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.  Do
not use or load this software and any associated materials
(collectively, the "Software") until you have carefully read
the following terms and conditions. By loading or using the
Software, you agree to the terms of this Agreement. If you
do not wish to so agree, do not install or use the Software.

Please Also Note:
* If you are an Original Equipment Manufacturer (OEM),
  Independent Hardware Vendor (IHV), or Independent Software
  Vendor (ISV) this complete LICENSE AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL
  SOFTWARE LICENSE AGREEMENT, applies.

------------------------------------------------------------
For OEMs, IHVs, and ISVs:

LICENSE.  This Software is licensed for use only in 
conjunction with Intel component products. Use of the
Software in conjunction with non-Intel component products
is not Licensed hereunder. Subject to the terms of this 
Agreement, Intel grants to You a nonexclusive,
nontransferable, worldwide, fully paid-up license under
Intel's copyrights to:
  a) use, modify, and copy Software internally for Your own
     development and maintenance purposes; and
  b) modify, copy and distribute Software, including
     derivative works of the Software, to Your end-users,
     but only under a license agreement with terms at least
     as restrictive as those contained in Intel's Final,
     Single-User License Agreement, attached as Exhibit A;
     and
  c) modify, copy and distribute the end-user documentation
     that may accompany the Software, but only in
     association with the Software.
If You are not the final manufacturer or vendor of a
computer system or software program incorporating the
Software, then You may transfer a copy of the Software,
including derivative works of the Software (and related
end-user documentation), to Your recipient for use in
accordance with the terms of this Agreement, provided such
recipient agrees to be fully bound by the terms hereof. You
shall not otherwise assign, sublicense, lease or in any
other way transfer or disclose Software to any third party.
You shall not reverse-compile, disassemble or otherwise
reverse-engineer the Software.

Except as expressly stated in this Agreement, no license or
right is granted to You directly or by implication,
inducement, estoppel or otherwise. Intel shall have the
right to inspect or have an independent auditor inspect Your
relevant records to verify Your compliance with the terms
and conditions of this Agreement.

CONFIDENTIALITY.  If You wish to have a third-party
consultant or subcontractor ("Contractor") perform work on
Your behalf that involves access to or use of Software, You
shall obtain a written confidentiality agreement from the
Contractor that contains terms and obligations with respect
to access to or use of Software no less restrictive than
those set forth in this Agreement and excluding any
distribution rights, and use for any other purpose.
Otherwise, You shall not disclose the terms or existence of
this Agreement or use Intel's name in any publications,
advertisements or other announcements without Intel's prior
written consent. You do not have any rights to use any Intel
trademarks or logos.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS.  Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and by international
treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software,
or to items referenced therein, at any time without notice,
but is not obligated to support or update the Software.
Except as otherwise expressly provided, Intel grants no
express or implied right under Intel patents, copyrights,
trademarks or other intellectual property rights. You may
transfer the Software only if the recipient agrees to be
fully bound by these terms and if you retain no copies of
the Software.

LIMITED MEDIA WARRANTY.  If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
(90) days after delivery by Intel. If such a defect is
found, return the media to Intel for replacement or
alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE.  Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT.  Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.

APPLICABLE LAWS.  Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS.  The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or their
successors. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.

------------------------------------------------------------
EXHIBIT "A"
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.  Do
not use or load this software and any associated materials
(collectively, the "Software") until you have carefully read
the following terms and conditions. By loading or using the
Software, you agree to the terms of this Agreement. If you
do not wish to so agree, do not install or use the Software.

LICENSE.  You may copy the Software onto a single computer
for your personal, non-commercial use, and you may make one
back-up copy of the Software, subject to these conditions: 
1. This Software is licensed for use only in conjunction
   with Intel component products.  Use of the Software in
   conjunction with non-Intel components is not licensed
   hereunder.
2. You may not copy, modify, rent, sell, distribute or
   transfer any part of the Software except as provided in
   this Agreement, and you agree to prevent unauthorized
   copying of the Software.
3. You may not reverse-engineer, decompile or disassemble
   the Software. 
4. You may not sublicense or permit simultaneous use of the
   Software by more than one user.
5. The Software may contain the software or other property
   of third-party suppliers, some of which may be identified
   in, and licensed in accordance with, any enclosed
   "license.txt" file or other text or file.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS.  Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and international treaty
provisions. You may not remove any copyright notices from
the Software. Intel may make changes to the Software, or to
items referenced therein, at any time without notice, but
is not obligated to support or update the Software. Except
as otherwise expressly provided, Intel grants no express or
implied right under Intel patents, copyrights, trademarks
or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by
these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY.  If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
(90) days after delivery by Intel. If such a defect is
found, return the media to Intel for replacement or
alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE.  Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT.  Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.

APPLICABLE LAWS.  Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS.  The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or their
successors. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.

SLAOEMISV1/RBK/January 21, 2000

************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or 
warranty.  
************************************************************
Information in this document is provided in connection with 
Intel(R) products.  No license, express or implied, by estoppel 
or otherwise, to any intellectual property rights is granted 
by this document.  Intel assumes no liability whatsoever, 
and Intel disclaims any express or implied warranty 
relating to sale and/or use of Intel(R) products, including 
liability or warranties relating to fitness for a particular 
purpose, merchantability or infringement of any patent, 
copyright or other intellectual property right.  Intel(R) 
products are not intended for use in medical, life saving, 
or life-sustaining applications.

************************************************************
Intel Corporation disclaims all warranties and liabilities 
for the use of this document and the information contained 
herein, and assumes no responsibility for any errors which 
may appear in this document, nor does Intel make a 
commitment to update the information contained herein.  
Intel reserves the right to make changes to this document at 
any time, without notice.
************************************************************
************************************************************

* Intel is a trademark or registered trademark of Intel COrporation 
  or its subsidiaries in the United States and other countries.
* Third-party brands and names are the property of their 
respective owners.

Copyright (c) Intel Corporation, 2002-2003


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.02