//------------------------ // ファームウェアアップデートæÊ //------------------------ 00000001=Use to update the firmware installed in your printer. 00000002=File Name 00000003=Version Information 00000004=Firmware Version of the Printer: 00000005=Unknown 00000006=Firmware Version of the Selected File: 00000007=Newer 00000008=Older 00000009=Same 00000010=Printer 00000011=Printer Version: 00000012=Current Firmware Version: 00000014=Network Card Version: 00000017=Update Printer Firmware 00000018=Update Network Device Firmware 00000100=Browse... 00000101=Update 00000102=Help 00000190=Quit 00000180=Exit 00000200=Select a printer. 00000191=Select Printer... //------------------------ // 警告æÊ //------------------------ 00000300=Are you sure you want to quit? 00000301=The necessary file cannot be found. Install the program again. 00000302=The printer is not ready. 00000303=There is not enough free memory to run the program. 00000304=The necessary printer driver cannot be found. Install the necessary printer driver. 00000380=EPSON Status Monitor 3 cannot be found. Install EPSON Status Monitor 3. 00000305=Cannot communicate with the selected printer. 00000306=The firmware version could not be obtained from the printer. 00000307=The selected file cannot be used to update the chosen printer's firmware. 00000308=Cannot update the firmware because the data in this UPG file is damaged or the file is for a different printer. 00000309=Update is complete. 00000310=A reply has not yet been received from the printer. Turn off the printer and then turn it on again. After either the READY or UPDATE F/W message is displayed on the printer's LCD panel, click OK. 00000311=Update is not complete. Click Update to try again. 00000312=Update is not complete. Turn off the printer and then turn it on again. If you are not using a USB connection, change to a USB connection. Then try the update again. 00000313=Cannot find the Help files. 00000314=This UPG File Format is not supported. 00000315=Failed to authenticate password.\nEnter the password again. 00000316=Could not complete the update. Click Update to try again.\nIf this does not solve the problem, reinstall the application. 00000317=Could not complete the update.\nQuit the firmware update and then start it again. 00000318=Restart the printer by turning it off and on again. Then click OK. 00000319=Cannot update the firmware because the data in this EFU file is damaged or the file is for a different printer. 00000320=This EFU File Format is not supported. 00000321=There is not enough free memory to run the program or cannot update the firmware because the data in this EFU file is damaged. //------------------------ // アバウトæÊ //------------------------ //------------------------ // メニュー //------------------------ 00000700=File 00000291=About Firmware Updater... //------------------------ // WaitæÊ //------------------------ 00020000=Waiting for the printer to reply. 00020100=Cancel //------------------------ // パスワードüÍæÊ //------------------------ 00030400=Password Input 00030000=A password has been set for the network device.\nPlease enter the password. 00030101=OKDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.