1. sa178_37_fus_eng.zip Driver
2. PhMs6.inf File Contents

PhMs6.inf Driver File Contents (sa178_37_fus_eng.zip)

[Version]
Signature="$CHICAGO$"
Class=HDC
provider=%MSFT%

[Manufacturer]
%MfgName%=Microsoft

; USBMSC IDs are added below at installation.  The section name [Micorsoft] must be the last line in this file.
[Microsoft]
; Use USBMSC IDs
;
; SDK 2520 MSCN
%USB\Generic.DeviceDesc%=Generic.install,USB\VID_0471&PID_018B
%USB\Generic.DeviceDesc%=Generic.install,USB\VID_0471&PID_0188
%PHMS6\Generic.DeviceDesc%=phms6pdr.install,PHMS6\DISK

[PreCopySection]
HKR,,NoSetupUI,,1

[DestinationDirs]
; \<WINDIR>\SYSTEM32\DRIVERS
phms6.files = 10,System32\Drivers

; \<WINDIR>\SYSTEM\IOSUBSYS
phms6pdr.files = 12

[Generic.install]
CopyFiles=phms6.files, phms6pdr.files
AddReg=phms6.addreg

[Generic.install.HW]
AddReg=bulkonly.addreg.HW

[phms6.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,PHMS6.SYS


; If the device does not correctly indicate which protocol it uses,
; one of the following sections should be added to indicate which protocol
; the driver should use.

; Indicate that the device uses the C/B/I protocol
[cbi.addreg.HW]
HKR,,DeviceProtocol,0x10001,00

; Indicate that the device uses the C/B protocol
[cb.addreg.HW]
HKR,,DeviceProtocol,0x10001,01

; Indicate that the device uses the BULK ONLY protocol
[bulkonly.addreg.HW]
HKR,,DeviceProtocol,0x10001,0x50
HKR,,DeviceType,0x10001,0x00

; Install the port driver
[phms6pdr.install]
AddReg=phms6pdr.addreg

[phms6pdr.addreg]
HKR,,DevLoader,,*ios
HKR,,PortDriver,,phms6pdr.pdr



[phms6.files]
phms6.sys

[phms6pdr.files]
phms6pdr.pdr

[SourceDisksNames]
1000 = %DiskName%,"",,

[SourceDisksFiles]
PHMS6.SYS = 1000
PHMS6PDR.PDR = 1000


[Strings]
MSFT="Microsoft"
MfgName="Microsoft"
;---------------------------------------------------------------;
;
; Translated strings appended here during installation after
; determining default language of the host system.