readme.txt Driver File Contents (


1.  Copy all files from f6flpy32 or f6flpy64 directory
    to a floppy disk.

2.  The floppy contain the iaStor.inf, iaStor.sys, and TxtSetup.oem files in the root directory.

3.  At the beginning of the operating system setup, press F6
    to install a third party SCSI or RAID driver.

4.  When prompted, select 'S' to Specify Additional Device.

5.  When prompted, insert the floppy disk you created and
    press enter.

6.  At this point you should be presented with a selection
    for "Intel(R) RAID Controller". Highlight this selection
    and press enter.

7.  Press enter again to continue. Leave the floppy disk in 
    the system until the next reboot as the software will 
    need to be copied from the floppy disk again when setup
    is copying files.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.70