/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage RNDIS Host Demo * * \section SSec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * - Series 7 USB AVRs * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Host</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>Microsoft RNDIS Specification</td> * </tr> * <tr> * <td><b>Usable Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> * * \section SSec_Description Project Description: * * RNDIS host demonstration application. This gives a simple reference * application for implementing a RNDIS Ethernet host, for USB devices such as * modems. * * This demo will enumerate an attached USB RNDIS device, print out its vendor ID * and any received packets in raw form through the serial USART. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.