/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Joystick Host With HID Descriptor Parser Demo * * \section SSec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * * - Series 7 USB AVRs * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Host</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>USBIF HID Specification \n * USBIF HID Usage Tables</td> * </tr> * <tr> * <td><b>Usable Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> * </table> * * \section SSec_Description Project Description: * * Joystick host demonstration application. This gives a simple reference * application for implementing a USB Joystick host, for USB joysticks using * the standard joystick HID profile. It uses a HID parser for the HID * reports, allowing for correct operation across all USB joysticks. This * demo supports joysticks with a single HID report. * * Joystick movement and button presses are displayed on the board LEDs. * On connection to a USB joystick, the report items will be processed and * printed as a formatted list through the USART before the joystick is * fully enumerated. * * Currently only single interface joysticks are supported. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.