PCMCIA 10/100 Fast Ethernet + 56K Fax/Modem PC Card Installation for Microsoft Windows 2000 Contents ÄÄÄÄÄÄÄÄ Introduction Getting Started Support Options Copyrights, Trademarks, and Disclaimers Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ Windows 2000 provides a complete "Plug n' Play" System that will automatically recognize and configure most PC Cards. Before inserting your LanModem PC Card, the system's PCMCIA chipset must be enabled and functioning. The PCMCIA chipset is responsible for controlling the systems interface for PC Cards. Please consult the system's manual or manufacture for use with Windows 2000. Multifunction PC Cards put a heavy demand on a system's resources. Please resolve all system conflicts, errors, and Windows 2000 issues before installing the LanModem. Please have the installation media for the Windows 2000 ready for any request for files. Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With the system off, remove all PC Cards Start/Boot Windows 2000 Insert the LanModem into one of the system's PCMCIA Slots A "Found New Hardware" dialog box should appear. Insert the LanModem driver disk in drive A: Follow "Found New Hardware Wizard" dialog box to install the driver. Because the device is multifunction, the system will repeat the "Found New Hardware" a few times. Please repeat the same steps for each request made by the system. The Window 2000 PCMCIA installation will add Microsoft network support automatically. Any network support can be adjusted by the "Network and Dial-up Connections" in the Control Panel. Support Options ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ We are consistently improving and upgrading our drivers. you are welcomed at any time to browse through our BBS, and download any drivers, utilities and help files. If you still cannot get the LanModem working properly, our technical experts are always ready to help. Please be at your computer, have your LanModem, Drivers Disk, and the following information available: * Version number of any drivers you are running * The extact text of any error message displayed on your screen * The type of computer * The type of network Copyrights, Trademarks, and Disclaimers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ All references to MS, Windows 2000, Win98, Windows 98, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporationsDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.