PCNFS.TXT Driver File Contents (lm560t.zip)

PCMCIA Ethernet/Fax/Modem                                         May 1996

			 SUN PCNFS 5.0 Installation

  Contents
  ÄÄÄÄÄÄÄÄ
       Introduction
       Getting Started
       Support Options
       Copyrights, Trademarks, and Disclaimers

  Introduction
  ÄÄÄÄÄÄÄÄÄÄÄÄ
       This installation assumes that the PCMCIA drivers are working 
       properly. Getting Started will describe the installation for 
       Lan Manager.

  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       Please read all methods below and choose the one that matches your
       configuration.

       Method 1 -- NDIS Driver
       ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       When using PC-NFS concurrently with LAN Manager, select the "NDIS"
       option from the PC-NFS installation screen.  This option works with
       the NDIS driver included in the provided driver diskette.  Copy the
       files listed below into the \NFS directory of your hard disk.  These
       files will be used in the installation.

	   File              Description
	   ------------     ----------------------------------------------
	   NFS-NDIS.SYS      PC-NFS driver program
           LMNDIS.DOS        NDIS driver program
	   PROTMAN.SYS       MS PROTOCOL MANAGER
	   NETBIND.EXE       MS LAN MANAGER Netbind

       The following lists the contents of the configuration files:

	   CONFIG.SYS                                AUTOEXEC.BAT
	   ÄÄÄÄÄÄÄÄÄÄ                                ÄÄÄÄÄÄÄÄÄÄÄÄ
	   SWITCHES=/F                               SET TZ=EST5EDT
	   DEVICE=C:\HIMEM.SYS                       C:\DOS\SMARTDRV.EXE
	   DEVICE=C:\EMM386.EXE NOEMS RAM            @PROMPT $p$g
	   DOS=HIGH,UMB                              PATH=C:\NFS;C:\WINDOWS;C:\DOS;
	   BUFFERS=10,0                              C:\LANMAN\NETBIND
	   FILES=40                                  SET TEMP=C:\DOS
	   STACKS=0,0                                SET NFSDRIVE=C
	   LASTDRIVE=G                               SET NFSPATH=C:\NFS
	   SHELL=C:\DOS\COMMAND.COM C:\DOS /P        SET TN_DIR=C:\NFS\TELNET
	   DEVICE=C:\NFS\PCNFS.SYS /l40              C:\NFS\PRT *
	   DEVICE=C:\NFS\SOCKDRV.SYS                 C:\NFS\NET INIT
	   DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN
	   DEVICE=C:\LANMAN\NFS-NDIS.SYS
           DEVICE=C:\LANMAN\LMNDIS.DOS

	   PROTOCOL.INI
	   ÄÄÄÄÄÄÄÄÄÄÄÄ
	   [PROTOCOL MANAGER]
		 DriverName   = PROTMAN$

           [LMNDIS]
                DRIVERNAME = LMNDIS$
	   [NFS-NDIS]
		 DriverName   = NFSLINK$
                 Bindings     = LMNDIS

       To use the NDIS driver, the user needs to obtain a PC-NFS 5.0
       QUIKNDIS diskette which will install all but the LanModem driver.

       Method 2  -- ODI Driver
       ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
       When using PC-NFS concurrently with NetWare 3.1x/4.0, select the
       "ODI" option from the PC-NFS installation screen.  This option works
       with the ODI driver included in the provided driver diskette.  Copy
       the files listed below into the \NFS directory of your hard disk.
       These files will be used in the installation.

	   File             Description
	   ------------     -----------------------------------------
	   NFSODI.SYS       PC-NFS driver program
           LMODI.COM        ODI driver program
	   LSL.COM          NetWare Link Support Layer
	   IPXODI.COM       NetWare IPX/SPX Protocol
	   NETX.EXE         NetWare Workstation Shell

       The following lists the contents of the configuration files:

	   CONFIG.SYS                             AUTOEXEC.BAT
	   ÄÄÄÄÄÄÄÄÄÄ                             ÄÄÄÄÄÄÄÄÄÄÄÄ
	   SWITCHES=/F                            SET TZ=EST5EDT
	   DEVICE=C:\HIMEM.SYS                    C:\DOS\SMARTDRV.EXE
	   DEVICE=C:\EMM386.EXE NOEMS RAM         @PROMPT $p$g
	   DOS=HIGH,UMB                           PATH=C:\NFS;C:\WINDOWS;C:\DOS;
	   BUFFERS=10,0                           SET TEMP=C:\DOS
	   FILES=40                               SET NFSDRIVE=C
	   STACKS=0,0                             SET NFSPATH=C:\NFS
	   LASTDRIVE=G                            SET TN_DIR=C:\NFS\TELNET
	   SHELL=C:\DOS\COMMAND.COM C:\DOS /P     LSL
           DEVICE=C:\NFS\PCNFS.SYS /l40           LMODI.COM
	   DEVICE=C:\NFS\SOCKDRV.SYS              C:\NFS\PRT *
	   DEVICE=C:\NFS\NFSODI.SYS /b2           C:\NFS\NET INIT
						  IPXODI
						  NETX

	   NET.CFG
	   ÄÄÄÄÄÄÄ
           Link driver LMODI
                  INT 11
                  PORT 320
                  Frame Ethernet_802.2
		  Frame Ethernet_II
                  Protocol IPX 0 Ethernet_802.2

	If your Novell FILE SERVER is configured to use the Ethernet_802.3
	frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS
	in your CONFIG.SYS file and add an entry in your NET.CFG file
	defining the two frames types.

  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	We are consistently improving and upgrading our drivers. you are
	welcomed at any time to browse through our BBS, and download any
	drivers, utilities and help files.

        If you still cannot get the LanModem working properly, our
	technical experts are always ready to help.  Please be at your
        computer, have your LanModem, Drivers Disk, and the following
	information available:

	* Version number of CARDEN.EXE or any drivers you are
	  running
	* The extact text of any error message displayed on your screen
	* The type of computer
	* The type of network

  Copyrights, Trademarks, and Disclaimers
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
  rights reserved by Microsoft Corporation

  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
  reserved by Novell Corporation

  Further rights reserved to their respective corporations

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.62