PCMCIAs Ethernet/Fax/Modem May 1996 Installation for Microsoft Windows 95 Contents ÄÄÄÄÄÄÄÄ Introduction Getting Started Troubleshooting Support Options Copyrights, Trademarks, and Disclaimers Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ Windows 95 provides a complete "Plug n' Play" System that will automatically recognize and configure most PC Cards. Before inserting your LanModem PC Card, the system's PCMCIA chipset must be enabled and functioning. The PCMCIA chipset is responsible for controlling the systems interface for PC Cards. Please consult the system's manual or manufacture for use with Windows 95. Multifunction PC Cards put a heavy demand on a system's resources. Please resolve all system conflicts, errors, and Windows 95 issues before installing the LanModem. Please have the installation media for the Windows 95 ready for any request for files. Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With the system off, remove all PC Cards Start/Boot Windows 95 Remove any previous Network Setup -Press the START button on task bar -Select SETTINGS -Select CONTROL PANEL -Select NETWORK SETTINGS -Highlight each network support entry and press REMOVE -After all network support is removed, press OK Insert the LanModem into one of the system's PCMCIA Slots A "New Hardware Found" dialog box should appear, see troubleshooting if the dialog box doesn't appear. Select "Driver from disk provided by hardware manufacturer" Insert the LanModem driver disk in drive A: Type in the path name A:\ Because the device is multifunction, the system will repeat the "New Hardware Found" a few times. Please repeat the same steps for each request made by the system. The Window 95 PCMCIA installation will add Netware and Microsoft network support automatically. Any network support can be adjusted by the Network Support in the Control Panel. Troubleshooting ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If the "New Hardware Found" dialog box doesn't appear. -Run REGEDIT -Select "HKEY_LOCAL_MACHINE" -Select "Enum" -Select "PCMCIA" -Highlight the folder "PCMCIAs-LanModem-XXXX" -Press the <Delete> key to delete the association Support Options ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ We are consistently improving and upgrading our drivers. you are welcomed at any time to browse through our BBS, and download any drivers, utilities and help files. If you still cannot get the LanModem working properly, our technical experts are always ready to help. Please be at your computer, have your LanModem, Drivers Disk, and the following information available: * Version number of any drivers you are running * The extact text of any error message displayed on your screen * The type of computer * The type of network Copyrights, Trademarks, and Disclaimers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporationsDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.