PCMCIAs Ethernet/Fax/Modem May 1996 Windows for Workgroup 3.11 Installation Contents ÄÄÄÄÄÄÄÄ Introduction Getting Started Support Options Copyrights, Trademarks, and Disclaimers Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ This installation assumes that the PCMCIA drivers are working properly. Getting Started will describe the installation instructions. Please have the Windows for Workgroup Installation media ready for any requests made by the installation program. Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Note: The LanModem WFW 3.11 driver use the NDIS 3.0 specs. Under DOS, install PCMCIA software of your choice or add the following line in CONFIG.SYS before DEVICE=EMM386.EXE: DEVICE=C:\CARDEN.EXE /COM=n /IO=nnn (Modify path accordingly.) When a LAN driver is installed, Windows for Workgroups will present a list of all available drivers. Select Unlisted or Updated Network Adapter for third-party adapters not included in the list. Windows for Workgroups will ask for the path of the driver. -Insert the LanModem driver disk into Drive A: -Provide the following path A:\WFW311 -The appropriate drivers will be copied add -Some additional drivers will be needed from the WFW installation disks. Once the system is finished close NETWORK SETUP and allow the system to reboot. Support Options ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ We are consistently improving and upgrading our drivers. you are welcomed at any time to browse through our BBS, and download any drivers, utilities and help files. If you still cannot get the LanModem working properly, our technical experts are always ready to help. Please be at your computer, have your LanModem, Drivers Disk, and the following information available: * Version number of CARDEN.EXE and any drivers you are running * The extact text of any error message displayed on your screen * The type of computer * The type of network Copyrights, Trademarks, and Disclaimers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporationsDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.