PCMCIAs Ethernet/Fax/Modem May 1996
MS Lan Manager Installation
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the PCMCIA drivers are working
properly. Getting Started will describe the installation for Lan
Manager.
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The MS LAN Manager provides a SETUP.EXE program in the setup diskette
for specifying a driver for the Ethernet adapter.
To install a driver for DOS, follow these steps:
If you are installing LAN Manager for the first time, answer "Yes"
when prompted for the importation of additional network drivers.
This prompt appears right after completion of the workstation
installation.
If LAN Manager is already installed in your hard disk, select "Add
New Config" from the Configuration menu. Then, select "Other Driver".
Insert the driver diskette in Drive A and follow the instructions on
the screen. The SETUP program will copy the necessary NDIS driver
programs from the driver diskette into your hard disk; that is, into
the LAN Manager directory.
After completion of SETUP, your CONFIG.SYS file will be modified to
reflect the NDIS driver programs.
Reboot your system to affect the changes.
To install a driver for DOS, follow these steps:
If you are installing LAN Manager for the first time, answer "Yes"
when prompted for the importation of additional network drivers.
This prompt appears right after completion of the workstation
installation.
If LAN Manager is already installed on your hard disk, select
"Add New Config" from the Configuration menu. Then, select
"Other Driver".
Insert the driver diskette in Drive A and follow the instructions
on the screen. The SETUP program will copy the necessary NDIS driver
programs from the driver diskette into your hard disk.
After completion of SETUP, your CONFIG.SYS file will be modified to
reflect the NDIS driver programs.
Reboot your system to affect the changes.
Support Options
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
We are consistently improving and upgrading our drivers. you are
welcomed at any time to browse through our BBS, and download any
drivers, utilities and help files.
If you still cannot get the LanModem working properly, our
technical experts are always ready to help. Please be at your
computer, have your LanModem, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE or any drivers you are
running
* The extact text of any error message displayed on your screen
* The type of computer
* The type of network
Copyrights, Trademarks, and Disclaimers
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
rights reserved by Microsoft Corporation
All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.