Please use the following process when running the USB certified driver installation utility.
This utility will install the USB digitally signed drivers on a new PC or a PC which has had
the digitally signed drivers previously installed with no operator intervention.
This driver works for all TS210, TS220, TS215, TS230, TS240, TS4120 and CX30 series scanner models. It also determines whether the
PC is using a 32 bit or 64 bit operting system and installs the appropriate driver, automatically.
IMPORTANT:
1) Be sure the scanner is powered off or disconnected from the PC in the case
of the CX30 and TS240.
2) Run the TellerscanDriverV40.exe.
(This launches Install Shield which will install the USB drivers on a XP, Vista, or Windows 7, 32 or 64 bit PC (automatically).
The operator will not have to make any choices other than to select Run, Next and Finish under Install Shield.
If run a second time or if the options present themselves (meaning the driver has already been installed), select Repair for the option.)
3) Power on the scanner. The PC should find and install the scanner as a TSDevice and then Tellerscan with no operator intervention.
(Note: The scanners will wait to install itself as a Tellerscan until the scanner has been acquired by the application, except for the TS240.
The TS240 will start as a Tellerscan in Device Manager)
This driver utility also copies out the TS220Firmware.bin, TS230Firmware.bin, TS240Firmware_V1.1.1.XX.bin, TS440firmware.bin, CX30Firmware.bin
and CX30Firmware_V1.1.X.X.bin and CX30KfFirmware_V1.1.X.X.bin files into the default location of C:\Windows\system32\drivers folder, or
C:\Windows\Syswow64\drivers folder, for future reference.
This USB driver also has a built in 'keep alive' feature to help eliminate USB port timeouts.
Note:
To run the TellerscanDriverV40.exe Install Shield routine in full silent mode for remote installations, use the following command,
TellerscanDriverV40.exe /s /v/qn (note: there is a space after .exe and after /s, but no spaces for /v/qn)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.