Digital Media Reader 1.09 Intended platform: Emachines/Gateway Desktop reader Supports IOI VID/PID of VID=0A48/PID=3239 Supports Northstar VID/PID of VID=058F/PID=9360 When installing the Digital Media Reader the following process must be followed: 2. Plug in BOTH IOI PID=3239 AND NS PID=9360 reader into the system at the same time in different USB port (there may be minor work to twick USB wires for 2nd reader in the system as both IOI and NS reader use internal USB cable) NOTE: If you want the icon software to only work with Northstar desktop media reader, then you do not need to plug in the IOI media reader. 3. Run the installation software to completion and success 4. At this point, if you still have both IOI and NS reader plugged into the system, you will see 8 drive icons(4 for IOI, 4 for Northstar). 5. Remove either IOI or Northstar reader from system. 6. System is reader to work with both Northstar or IOI 8-in-1 reader Change Control: 10/21/2004 1. This version of the icon software does NOT require a reboot after installation. The changes will take effect immediately after the installation process. 2. Control Panel version is 1.09Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.