protocol.ini Driver File Contents (Lan_Intel_7.1.12.0_XPx86_A.zip)

; Protocol.Ini section for the Intel(R) PRO/100 Network Connection

   DRIVERNAME   = E100B$

;
; Some common parameters
;
;   SPEED           = [0 | 10 | 100]
;                     0 = Auto (default)
;
;   FORCEDUPLEX     = [0 | 1 | 2]
;                     0 = Auto (default); 1 = Half; 2 = Full
;
;   SLOT            = 0x38
;
;   NODE            = "00AA00123456"
;
;   TRANSMITBUFFERS = 20    ; range 3 - 30
;
;   RECEIVEBUFFERS  = 20    ; range 3 - 30
;
;   CACHEFLUSH      = 0     ; set to 1 to allow the driver to hook the cache flush interrupt
;                           ; this is needed when doing unattended installations of NT 4
;
;   NOWARMBOOTHOOK  = 0     ; set to 1 to prevent the driver from hooking the
;                           ; warm boot interrupts under DOS only -
;                           ; not recommended for normal use
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.42