CLDMA Language Resource
=========================
&
<NAME>=CompanyName
<HINT>=CyberLink
&
<NAME>=ProductName
<HINT>=CLDMA
&
<NAME>=You must restart your computer before the new settings will take effect. Do you want to restart your computer now?
<HINT>=Vµ¢ÝèðLøÉ·éOÉRs
[^ðÄN®µÈ¯êÎÈèܹñB ¡Rs
[^ðÄN®µÜ·©?
&
<NAME>=Enable DMA mode of %s.
<HINT>= DMA[hðLøÉ·é%sB
&
<NAME>=*WARNING* Please read the following instructions: This program can enable DMA mode if it is supported by your IDE drives to speed up Video playback performance. If your IDE devices can not work properly after enable DMA mode, you can restore the old settings by executing this program again.
<HINT>=*Ó* Ìw¦ðÇñž³¢:\n\n±ÌvOÍArfI^æÆĶ«\̬xüãðà½ç·IDEhCoÉæèT|[g³êÄ¢éêÉADMA[hðLøÉÅ«Ü·B¨g¢ÌIDEfoCXªDMA[hðLøɵ½ãųíÉ®ìµÈ¢êA±ÌvOðÄÀs·é±ÆÅâÝèð³·é±ÆªÅ«Ü·B
&
<NAME>=Select IDE drives for which DMA mode will be enabled:
<HINT>= IDEhCuðIðµÄDMAðLøÉ·é:
&
<NAME>=Press "Ok" or "Cancel" to exit this program. If you would like to perform Display and drives test. Please press "Diagnostic" button.
<HINT>=[OK] Ü½Í [LZ] ðµÄ±ÌvOðI¹µÜ·BfBXvCÆhCu̸ðÀsµ½¢êA"ff"ðNbNµÄ¾³¢B
&
<NAME>=%d. Fail to disable DMA mode of %s.
<HINT>= %dBDMA[h̳øÉG[ª¶µÜµ½%s.
&
<NAME>=%d. DMA mode of %s is not enabled.
<HINT>=%dBDMA[hð%sLøÉūܹñB
&
<NAME>=%d. DMA mode of %s is enabled.
<HINT>=%dBDMA[hÍ%sLøÉÈÁĢܷB
&
<NAME>=%d. Fail to enable DMA mode of %s.
<HINT>= %dBDMA[hÌLøÉG[ª¶µÜµ½%s.
&
<NAME>=Diagnostic
<HINT>=ff
&
<NAME>=Restore
<HINT>=³
&
<NAME>=List of IDE Drives:
<HINT>= IDEhCoÌXg:
&
<NAME>=All of the selected devices have been successfully set into DMA mode. Press "Ok" to save new configuration or "Cancel" to restore original configuration.
<HINT>=·×ÄÌIð³ê½foCXͳíÉDMA[hÉÝè³êĢܷB[OK] ðµÄVµ¢\¬ðÛ¶·é©A[LZ] ðµÄIWiÌ\¬ð³µÄ¾³¢B
&
<NAME>=Fail to change DMA mode of the selected devices. Please press "Ok" to restore original configuration or "Cancel" to exit this program.
<HINT>=Ið³ê½foCXÌDMA[hÌÏXÉG[ª¶µÜµ½B[OK] ðNbNµÄIWiÌ\¬ð³·é©A[LZ] ðNbNµÄ±ÌvOðI¹µÄ¾³¢B
&
<NAME>=There is at least one selected IDE drive that does not support DMA mode. Press "Ok" to save new configuration or "Cancel" to restore original configuration.
<HINT>= IDEhCuªÈÆà1ÂIð³êĢܷªA±ÌhCuªDMA[hðT|[gµÄ¢Ü¹ñB[OK] ðµÄVµ¢\¬ðÛ¶·é©A[LZ] ðµÄIWiÌ\¬ð³µÄ¾³¢B
&
<NAME>=%s does not support DMA mode.
<HINT>=%s DMA[hðT|[gµÄ¢Ü¹ñB
&
<NAME>=*WARNING* The backup data does not contain information for current devices. You should not restore original settings unless you really want to. Do you still want to restore original settings?
<HINT>=*Ó* obNAbvf[^ÉÍ»ÝÌfoCXÉηéîñªÜÜêĢܹñBIWiÝèð³µÈ¢æ¤É¨©ßµÜ·B IWiÝèð³µÈ¢æ¤É¨©ßµÜ·B
&
<NAME>=No IDE drive is found. Please check your devices or driver settings and replace any real mode CD/DVD-ROM driver with the 32-bit driver supplied by Windows.
<HINT>= IDEhCuª©Â©èܹñBfoCXܽÍhCoÌÝèð`FbNµÄAA[hÌCD/DVD-ROMhCoðWindowst®Ì32rbghCoÆð·µÄ¾³¢B
&
<NAME>=This program can only be executed under Windows95 or Windows98.
<HINT>=±ÌvOÍWindows 95ܽÍWindows 98«ºÅÌÝÀsÅ«Ü·B
&
<NAME>=The current IDE driver is %s and DMA mode has been enabled by default. Please refer to the corresponding documents of that driver for further details about enabling DMA mode.
<HINT>=»ÝÌIDEhCoÍ%sÅADMA[hÍúlÅLøɳêĢܷB DMA[hðLøÉ·é±ÆÉÖ·éÚ×É¢ÄÍηéhCoÌ}j
AðQƵľ³¢B
&
<NAME>=Fail to get information of your IDE driver. Please check if the driver is installed correctly or contact your driver vendor to update new driver program.
<HINT>= IDEhCoÌîñÌüèÉG[ª¶µÜµ½BhCoª³µCXg[³êÄ¢é©`FbNµÄ¾³¢AܽÍhCoÌx_[ÉAµÄXVµÄ¾³¢B
&
<NAME>=Fail to get version information of your IDE device driver.
<HINT>= IDEfoCXhCoÌo[WîñÌüèÉG[ª¶µÜµ½B
&
<NAME>=Fail to detect IDE drive. It mighty be caused by incompatible IDE driver which does not support your IDE devices.
<HINT>= IDE hCuoÉG[ª¶µÜµ½B±êÍAIDEfoCXðT|[gµÄ¢È¢ñÝ·ÌIDEhCoÉæÁÄø«N±³ê½Â\«ª èÜ·B
&
<NAME>=Fail to save backup data for restoring to original configuration later. You must enable DMA mode by yourself.
<HINT>=obNAbvútÌÛ¶ÉG[ª¶µÜµ½B DMA[hðè®ÅLøɵȯêÎÈèܹñB
&
<NAME>=DMA mode has been mode changed.
<HINT>= DMA[hªÏX³êĢܷB
&
<NAME>=All modification has been canceled.
<HINT>=·×ÄÌÏXªLZ³êĢܷB
&
<NAME>=All your IDE drives have been set into DMA mode.
<HINT>= IDEhCuÍ·×ÄDMA[hÉÝè³êĢܷB
&
<NAME>=Your IDE device driver does not support DMA mode. Please update your IDE device driver first.
<HINT>=¨g¢ÌIDEfoCXhCoÍDMA[hðT|[gµÄ¢Ü¹ñBܸIDEfoCXhCoðXVµÄ¾³¢B
&
<NAME>=Intel 82371xB PCISet Device driver does not ready. Your system may not be best performance while playback DVD Video. You can press "Update" button to update Intel 82371x PCISet Device driver.
<HINT>= Intel 82371xB PCISetÌfoCXhCoÌõªÅ«Ä¢Ü¹ñB DVDĶA¨g¢ÌVXeÍÅKÌ«\ðö·é±ÆªÅ«Ü¹ñB"XV"ðNbNµÄAÅVÌIntel 82371x PCISetfoCXhCoðüèµÄ¾³¢B
&
<NAME>=Update
<HINT>=XV
&
<NAME>=Since Windows 95 would not recognize the Intel 82371AB/EB chipset, the advanced functions, for example, DMA (also called bus mastering) provided by them could not be enabled. Intel has provided this patch, "Intel 82371xB INF Update Installer for Windows 95", to solve this problem. For further information, please check "readme.txt" incorporated with this patch.
<HINT>= Windows 95ÍIntel 82371AB/EB`bvZbg¨æÑDMA(ܽÍoX}X^)ÈÇÌg£@\ðF¯µÈ¢½ßALøÉÈÁĢܹñB IntelÍpb`A·Èí¿ "Intel 82371xB INF Update Installer for Windows 95" ðñ·é±ÆűÌâèððµÄ¢Ü·BÚ×É¢ÄÍA±Ìpb`ÉgÝÜêÄ¢é "readme.txt" ðQƵľ³¢B
&
<NAME>=Explanation:
<HINT>= à¾:
&
<NAME>=File not found (%s)!
<HINT>= t@Cª©Â©èܹñ(%s).
&
<NAME>=Please insert PowerDVD CD-ROM Disc to drive: %s...
<HINT>= $Product$ CD-ROMfBXNðhCu: %sÉ}üµÄº³¢...
&
<NAME>=Some DVD-ROM drives do not follow the standard well and cause various problems when playing a copyright-protected(CSS) DVD title. Please insert a copyright-protected DVD title for compatiability test....
<HINT>= DVD-ROMhCoÉÍó¯üêÂ\ÈWðÜÁ½ççÈ¢àÌà é½ßAì Ûì³êÄ¢é(CSS)DVD^CgðĶµÄ¢éÆ«³Ü´ÜÈâèðø«N±·±Æª èÜ·B ì Ûì³êÄ¢éDVD^Cgð}üµÄÝ·«¸ðÀsµÄ¾³¢...
&
<NAME>=Diagnostic complete. The diagnoses have been output to %s. If PowerDVD can't work properly under your system. You can mail this log file to us. E-mail: support@cyberlink.com.tw Do you want to view this file now?
<HINT>=ffÍ®¹µÜµ½B ffÍoͳêܵ½%sBPowerDVDª¨g¢ÌVXeųíÉ®ìµÈ¢êAsupport@cyberlink.com.tw ¶É±ÌOt@Cðdq[ð¨è¾³¢B¡±Ìt@Cð\¦µÜ·©?
&
<NAME>=Your motherboard is using an ALi, SiS or VIA series of chipset. We strongly recommend you to install the IDE or bus master driver that comes with your motherboard and enable the DMA mode for accessing your IDE Devices. Not enabling DMA mode or using an improper IDE driver might either degrade the performance of PowerDVD or even prevent PowerVCR from properly executing. For more information about the IDE driver, please visit the web site of your motherboard vendor.
<HINT>=}U[{[hÍALiâSiSAVIAÌV[YÌ`bvZbgðgpµÄ¢Ü·B}U[{[hÉt®·éIDEܽÍoX}X^hCoðCXg[µADMA[hðLøɵÄIDEfoCXÉANZX·é椧µÜ·B DMA[hðLøɵȩÁ½èsKØÈIDEhCoðgp·éÆAPowerDVDÌ«\ª¿½èAPowerDVDª³µÀsµÈ¢±Æà èÜ·B IDEhCoÌÚ×É¢ÄÍA}U[{[hx_[ÌWebTCgÉANZXµÄ¾³¢B
&
<NAME>=DMAOk
<HINT>=OK
&
<NAME>=DMACancel
<HINT>=LZ
&
<NAME>=DMA Setting
<HINT>=DMAÝè
&
<NAME>=Reboot
<HINT>=ÄN®
&
<NAME>=You are using Windows XP, we recommend you not to change the default DMA mode.
<HINT>=WindowsXPÅ®ìµÄ¢Ü·BDMA[hÍÏXµÈ¢±Æ𨷷ߵܷB
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.