1. BIOS_eMachines_P01.A3L_A_A.zip Driver
2. AFUDOS.txt File Contents

AFUDOS.txt Driver File Contents (BIOS_eMachines_P01.A3L_A_A.zip)

AMI ROM Tool - AFUDOS

Description :
	AMI Firmware Update utility for DOS.

Current Label :
	8.00.15_AFUDOS_4.32

Release Date :
	2009/Jul/3

Source Control Location :
	SS: CORE8_ATL;$/BIOS/Corebin/800/ROMTools/AFU\afudos;

Reference Document :
	AFUDOS.PDF

Known Issues :


Release Notes:
==============================================================================
4.32

New features:
    1. Add a new command "/ICLC" for ignore the CMOS layout checksum check. 
       (EIP 22354)

Bug fixes:
    1. Fixed the progress message of ROMHole update does not correct problem, 
       when used the "/Hole" command to update.
    2. Fixed the halted issue of AFU when used the "/MEUF" to update the ME 
       firmware and used the "/Ln" command to Load CMOS Default at the same 
       time.
    3. Fixed the "/MEUF" and "/ME" two commands can not be used problem, when 
       set them are default command by AMIUCP.
    4. Fixed the halted issue of AFU when used the "/Q" command to hide all 
       message and the CMOS Layout difference between System ROM and ROM File 
       has been detected.
    5. Fixed the RomHole can not be updated issue, when the parameter of 
       RomHole not include the "File=xxx" definition.
    6. Change the "/X" command check priority in order to avoid the OEM-Rom-ID 
       Module does not work.
==============================================================================
4.31
	1. For security concern, change the ME Ignition Firmware update rule.
	2. Increased the "/ME" command for ME Entire Firmware update. (EIP 21346)
	3. Fix the coding mistake. When user has used the AMIUCP to set the default
	   command into the AFU, which would be caused the AFU can't display the
	   help message.
==============================================================================
4.30
	1. Increased the "/MEUF" command for ME Ignition Firmware update.
	2. Fixed the AFU couldn't to flash the BIOS directly, when User have
	   inserted the default command and ROM File image name at @CMD by AMIUCP.
	   [EIP 20419]
	3. Fixed the RomHole couldn't to protect issue, when one of RomHole of ROM
	   File has the same location as in System BIOS's. And the RomHole count of
	   ROM File doesn't match the System BIOS's. [EIP 20744]
	4. Fixed the ECBB couldn't protect issue, when ECBB size doesn't match 64KB
	   . [EIP 20843]
==============================================================================
4.29
	Fixed the AFUDOS could not to restart the system on the Legacy free
	platform after programming. [EIP 18623]
==============================================================================
4.28
	1. Fixed the issue of Module checksums shown up message is "bad", when has
	   one of module is aligned module. [EIP 18256]
	2. Fixed the GPNV offset miscalculation problem, which caused the "/R"
	   command preserve SMBIOS data failure, when the BIOS Size is bigger and
	   than 1MByte. [EIP 18505]
==============================================================================
4.27
	1. Added the CMOS Layout check to avoid generated the CMOS error after
	   bootblock recovery. [EIP 15681]
	2. Fixed the check rule issue of "IFD" block, when the "IFD" block size is
	   not equal to 64Kbyte. [EIP 15502]
	3. Fixed the NCB update checked rule, when NCB bin file not include the
	   header info. [EIP 16464]
==============================================================================
4.26
	1. To raise the OEM SMI's checking priority for OEM to be able to adjust
	   ROMHole flash behavior in BIOS.
	2. Referenced UCORE Function updated, according to UCORE v1.15.00.
	   (Compress & Uncompress Rule)
==============================================================================
4.25
	1. Fixed the RomHole issue of flashing BIOS, when the RomHole count of BIOS
	   ROM File doesn't match the System BIOS's RomHole count.
	2. Fixed the issue of $IIM offset wrong value, when using the RomHole count
	   of changes to flash the BIOS, and executed the command "/p" twice.
	3. Added to support the "/S" command to be stand along command.
==============================================================================
4.24
	Added AMIUCP, default configuration, support.
==============================================================================
4.23
	Change $IIM parsing rule for avoiding abnormal result when ROM File does
	not include the signature.
==============================================================================
4.22
	1. Fixed the issue of External BootBlock CheckSum error when EBB size
	   doesn't match 64K.
	2. Fixed the issue of Error occurred when ROMHOLE address set to "0".
==============================================================================
4.21
	1. Support reporting flash ROM Hole Command on OFBD when user is issued.
	2. Support reporting flash NCB Command on OFBD when user is issued.
	3. Support Cancel commands reporting on OFBD default configuration data.
==============================================================================
4.20
	Changed the ~CMD command style from "~" to be "/-" for prevented the
	not-compatible issue on Linux and FreeBSD.
==============================================================================
4.19
	Fixed the token of OFBD eModule doesn't open would cause the AFUDOS crashed
	by EC command.
==============================================================================
4.18
	1. Add /DEDFTCFG - to cancel all default configuration setting by BIOS.
	2. Add ~cmd_name - to cancel default configuration setting by BIOS.
	3. Fixed the SMI 20-24 balance problem. (For NB project)
	4. Modified the ROMHOLE checking rule when ROMHOLE is protect with block
	   address & Size matches with BIOS reported flash part info then AFU will
	   NOT erase block and re-update the flash block. Adding this to prevent
	   important data in BIOS when accident Reset is issued by end user.
==============================================================================
4.17
	1. Fixed the RomHole updated error when uses OFBD eModule ver 1.0.
	2. Modify EC [OEM Sub Version] message display type.
==============================================================================
4.16
	1. Add "Password Checking" and "Default Issued Command Configuration"
	   function according to OFBD spec.
	2. Add the new command line /ec to support flashing standard EC BIOS.
	3. Add the new command line /ncb and /ncbout for NCB flash.
	4. Support OFBD 2.0 specification - new Data structures updated.
	5. Add to get ROM Hole information from "F000" segment.
		* a patch to prevent getting ROM Hole info error when customer does not
		  want to flash BootBlock but main bios then the ROM Hole info address
		  will ptr to wrong location.
==============================================================================
4.15
	Add /clnevnlog for Clear Event Log.
==============================================================================
4.14
	1. Add Rom Hole Function support.
	2. Add /D command which backward compatible to AFU 1.xx version.
	3. Add ROM ID checking under case non-sensitive rule.
==============================================================================
4.13
	1. Fix the problem that some ROM Hole image may not be identified.
	2. Add Utility Identification Information (UII) structure.
	3. Change border line of help screen.
	4. Add ShutDown function support.
	5. Add Santa function support, flash BIOS without detail checking.
	6. EC Patch: Some EC will fail when Open/Close SMI is not balanced.
	7. Add fuma function which forces backup MA Information when flashing newer
	   version of BIOS.
==============================================================================
4.12
	1. Show warning message when /ECUF issued but no EC BIOS detected in BIOS.
	2. Add Intel Flash Descriptor Mode support.
==============================================================================
4.11
	1. Show warning function (/sw) will cause assertion error.
	2. Change /E function's behavior.
	3. Added /ECUF function to flash EC bios when newer version is detected.
==============================================================================
4.10
	Add /MAI command to display System Rom or Inserted Rom file's MA
	information.
==============================================================================
4.09
	Sync with AFULNX.
==============================================================================
4.08
	1. /M, /L0,/L1 functions become standalone function which means uses w/o
	   inseting the rom file.
	2. Add change version function /chgver.
	3. Fixed Mac address reading error.
	4. Fixed flash unknown data when /M is issued.
	5. Added new routine for afudos be able to read default setting cmd(s)
	   properly.
==============================================================================
4.07
	1. Added in new cmd /X:n for ROM ID checking with user defined ID length.
	   [funciton hidden from help]
	2. Added in new cmd /sw for showing warning message. [funciton hidden from
	   help]
==============================================================================
4.06
	Add maximum retry parameter.
==============================================================================
4.05
	1. Now AFUDOS can be configured and then executed properly through AFUSETUP
	   utility. Following items are configurable:
		* Command state: enable/disable, shown/hidden, and always issued.
		* Error return code and error message.
	2. Better algorithm in finding system's ROM ID.
	3. Fix potential failure on physical memory un-mapping.
	4. Fix possible memory leaks problems.
	5. Fix bad grammar of some error messages.
==============================================================================
4.04
	1. Add capability to preserve SMBIOS structures in NVRAM.
	2. Fix error parsing command line if 2nd character of ROM filename is 'm'.
==============================================================================
4.03
	1. ROM ID characters are case-insensitive.
	2. Compressed ROM Image support.
==============================================================================
4.02
	1.  Fix bugs for /C, /K, /O and /U command.
	2. Add /M option to update Boot Block MAC address if it exists.
	3. Check BIOS write-protection.
	4. Display error message when AFUDOS is running under Windows.
==============================================================================
4.01
	1. Add /L2 and /L3 commands to load CMOS optimal/default settings from
	   given ROM File.
	2. Lock keyboard and mouse during flashing BIOS.
	3. Fix the problem that EC block cannot be updated.
	4. Fix the problem that NCB checksum error if the ROM file built by
	   ROMBUILD v4.04 or lower.
	5. Fix the problem that cannot get correct ROM ID from CORE 8.00.10 (or
	   lower) BIOS ROM file.
	6. Fix the problem that update BIOS failure while O/S running under
	   multi-processor mode.
==============================================================================
4.00
	Formal release.