FirmwareUpgradeReadme.txt Driver File Contents (32pf9630a_37_fus_eng.zip)

Software history

BX23U-1.6.0.0_03541
Following problems are solved:
 Non-active digital antenna channels lost when cable is disconnected.


BX23U-1.5.0.0_03531
Following problems are solved:
 Availability cablecard channel map.
 Improved info in the service menu.
 Improved picture quality and stability on HDMI.
 Installation of channels.	


BX23U-1.4.0.0_03081
Following problems are solved:
 Issue related to intermittent video loss is solved.


BX23U-1.3.0.0_01481
Following problems are solved:
 Robustness improvement when receiving channel map changes.


BX23U-1.2.0.0_01471
Following problems are solved:
 Channel map changes of the OOB channel table are reflected in the TV's channel map
 Robustness improvement to support streams which have wrongly set Audio Only bit
 Solution for sudden audio drop
 Audio improvement to avoid click in sound in case of high input signal
 Make RRT5 functionality user controllable
 Data only channel are filtered out after installation
 Give priority to SCTE21 above SCTE 20 compliant captions to prevent duplicate characters in the CC text
 Improvement of CC processing on scrambled HD channels


BX23U-1.1.0.0_01461
Following problems are solved:
 Solution for sudden popup of menu or disfunctioning of keys on the television
 Improved robustness in POD behavior
 Improvements for playback of some specific streams not following standards.
 Based upon customer feedback: the permanent channel nr is not displayed anymore when OSD is put to normal, this enables the customer to have the volume bar without permanent channel numbers


BX23U-1.0.13.0_01441
Following problems are solved:
 Improvement for selection of Secundary Audio Program on digital channels
 Extra step in automatic installation to detect scrambled channels and unmark them in
preferred channel list, as a consequence the scrambled channels will be skipped when pressing CH+/CH- and are not visible in the channel map
 Default horizontal & vertical center value corrected on inputs where horizontal & vertical shift is allowed


BX23U-1.0.8.0 00841
Following problems are solved:
 Intermittent black flashes seen with specific distribution amplifiers
 Preferred Channel menu item temporarily disabed in BX23U-1.0.7.0 00831 is enabled with this release


BX23U-1.0.7.0 00831
Following problems are solved:
 Improved robustness for digital audio connections with some specific cable boxes
 Improved robustness for source selection and recovery time with some specific HDMI or DVI device
 Bad colours after switching between HDMI and YPbPr inputs
 Wrong decoding of very low bit rate ATSC streams
 General performance improvement


BX23U-1.0.6.0 00431
 Internal release only, should not be used in the field


BX23U-1.0.4.1 00421
Following problems are solved:
 Stereo ambilight last status improvement (Only for xxPF9830A/37 sets)


BX23U-1.0.5.0 00411
Following problems are solved:
 Improved robustness for digital audio connections with some specific cable boxes
 Improved robustness for source selection with some specific HDMI or DVI devices
 Bad colors after switching between HDMI and YPbPr inputs
 Wrong decoding of very low bit rate ATSC streams


BX23U-1.0.4.0 00201
Following problem is solved:
 Problem at production line.


BX23U-1.0.3.0 00191
Following problems are solved:
 Vertical picture shift not restored at startup.
 Thumbnails not visible in content browser after fast scrolling down through the list.
 Some specific CableCards reset on scrambled signals supporting multiple audio languages.
Prevention:
 Eliminate risk on picture detoriation.


BX23U-1.0.2.0 00181
Following problems are solved:
 Sometimes the digital CC can get stuck.
 In PIP/DW sometimes HDMI picture freezes while switching channels in the other window.
 Problem: sometimes bad detection of video signals on AV1 and AV3.

End_of_file
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.91