Yamaha XG Soft Synthesizer S-YXG50 Ver2.1
This file contains the latest information,corrections and addendum's for
your version of the program.
Read the following instruction before proceeding.
<Specification>
Tone Generation : Wave Table
Number of Voices : 676 Melody Voices + 42 SFX Voices+21 Drum/SFXKits
Multi-timbral Parts : 16
Maximum Polyphony : 128 notes
Effect Processor : 8 Chorus + 8 Reverb + 36 Variation Effect
Sampling Rate : 44/ 22/ 11kHz
Digital Dynamic Filter: Applied to each MIDI voice
Direct Sound (R) : ON/OFF
<Hardware Requirement>
CPU : Pentium (R) 166kHz or greater
MMX(TM) Technology Pentium(R) Processor is recommended
System Memory : 16MB or over
Operating System : Windows 95(R)/Windows 98(R)
Sound Function : 16bit Stereo Sound Codec
<Installation>
1 Insert the disk into the computer's disk drive.
2 Double-click on the YAMAHA folder to open it, then double-click the
"Setup.exe" file in the S-YXG50 folder.
3 Restart your computer when the installation is complete.
When the S-YXG50 is installed the following commands will be added to the
"system.ini" file.
[386Enh] section
device =vswp.vxd
[Driver] section
midixx =sxgb.drv
wavexx =sxgb.drv
mixerxx=sxgb.drv
("xx" is the number appended to the WAVE and MIDI drivers prior to installation)
<Uninstall procedure>
********* Remarks!!! **********************************************
Please run the uninstall program to remove the folder completely.
Do not remove the S-YXG50 folder.
********************************************************************
Use the following procedure if you wish to delete the S-YXG50 from your hard disk.
1. Click the [Start] button, and go to [Programs (P)] >> [Yamaha SoftSynthesizer
S-YXG50] and select [uninstall S-YXG50].
2. After the program starts, follow the directions given on-screen.
3. When your computer is re-started, S-YXG50 and its related files will be
deleted from your hard disk, and you will be able to install new drivers.
When the Uninstall Program does not work , delete the files shown below.
--> Delete or alter the specified files on the hard disk as described below:
1. Quit Windows and go to the MS-DOS mode.
2. Go to the C:\windows\system directory.
3. Delete the following files:
mmxswp00.dll
mmx32x00.dll
vswp.vxd
sxg2wave.tbl
sxgb.drv
sxgbcpl.cpl
sxgbsys.dll
sxgwave2.tbl
sxg05mx1.dll
sxg05mx3.dll
4. Edit the contents of the System.ini file.
5. Delete the "device=vswp.vxd" line in the [386Enh] section.
6. Delete the "midixx=sxgb.drv" and "wavexx=sxgb.drv" lines in the [Driver] section
("xx" is the number appended to the WAVE and MIDI drivers prior to installation).
<The XG home page>
XG-related information is available from the Yamaha home pages:
http://www.yamaha.co.jp/english/xg/
http://www.yamaha.com
http://www.yamaha.co.uk
NOTE:
* Soft Synthesizer is a trademark of the Yamaha Corporation.
* Microsoft, Direct Sound and Windows are registered trademarks of the Microsoft Corporation.
* Pentium and MMX are registered trademarks of Intel Corporation,
* Company names and product names etc. in README.TXT are registered trademarks or trademarks of their respective owners.
Copyright (C) 1996-1997 YAMAHA CORPORATION
All Rights Reserved
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.