1. iPF810820-HDI-Win-200010.EXE Driver
  2. Readme_English.txt File Contents

Readme_English.txt Driver File Contents (iPF810820-HDI-Win-200010.EXE)

ÿþ____________________________________________________________________________________________________



      Canon imagePROGRAF HDI Printer Driver Version  2.00.010

____________________________________________________________________________________________________



Contents



  1. Introduction

  2. System Requirements

  3. Precautions During Installation

  4. Cautions, Limitations, and Restrictions





1. Introduction ----------------------------------------------------------------



The Canon imagePROGRAF HDI printer driver (hereafter HDI driver) is a special 

printer driver compatible with HDI (Heidi Device Interface) of the 

architecture of CAD software applications, AutoCAD and AutoCAD LT (hereafter 

referred to together as "AutoCAD") supplied by Autodesk, Inc.



Trademarks and Abbreviations

- Canon, the Canon logo, and imagePROGRAF are trademarks or registered 

  trademarks of CANON INC.

- Microsoft and Windows are registered trademarks of the Microsoft 

  Corporation in the United States and other countries. 

- Autodesk, AutoCAD, AutoCAD LT, and other Autodesk product names are 

  trademarks or registered trademarks of Autodesk, Inc. in the United States 

  and other countries. 

- All other trademarks and registered trademarks are the property of their 

  respective owners.



- The following abbreviations for operating systems are noted:

===================================================================

Operating System                         Abbreviation

===================================================================

Microsoft Windows Vista                  Windows Vista

Microsoft Windows XP                     Windows XP

Microsoft Windows 2000                   Windows 2000

===================================================================





2. System Requirements ---------------------------------------------------------



The following hardware and software are recommended for this software:



Operating Systems

        Microsoft Windows Vista, English edition

        Microsoft Windows XP Professional/Home Edition, English edition

        Microsoft Windows 2000 Professional, English edition



AutoCAD Versions:

        AutoCAD 2000  / LT 2000

        AutoCAD 2000i / LT 2000i

        AutoCAD 2002  / LT 2002

        AutoCAD 2004  / LT 2004

        AutoCAD 2005  / LT 2005

        AutoCAD 2006  / LT 2006

        AutoCAD 2007  / LT 2007 / DWG TrueView 2007

        AutoCAD 2008  / LT 2008 / DWG TrueView 2008

        AutoCAD 2009  / LT 2009 / DWG TrueView 2009

        AutoCAD 2010  / LT 2010 / DWG TrueView 2010



Recommended operating environment

Any computer running the software listed above. 



Compatible Printers

        Canon imagePROGRAF iPF810

        Canon imagePROGRAF iPF820



Printer Driver

        Canon imagePROGRAF Printer Driver 2008 V4.00 or later



Note

- Windows versions other than English Windows cannot be used.

- This printer cannot be used with Windows Vista/XP 64-bit edition.





3. Precautions During Installation --------------------------------------------  



* For more about installation the procedure, please refer to the manual. 



* You must log into Windows as an Administrator before the installation.



* Before performing the installation, close all the other application software.

  You cannot install with imagePROGRAF Status Monitor running. 



* If you are using an HDI driver with a version of AutoCAD/AutoCADLT/DWG 

  TrueView undetectable at installation, install using the following procedure.

   (1) From File - Plotter Manager, select Add-A-Plotter Wizard

   (2) From the Plotter Model addition screen, select Have Disk

   (3) From the User Software CD (or when downloading, from the folder created 

       after decompressing), select the install file from the applicable 

       version folder appearing after the folder: \HDI\English, and then 

       continue by following the installation method in the user s manual.





4. Cautions, Limitations, and Restrictions ------------------------------------



Note the following limitations when using this software.



* Some print data may cause shift in hatching patterns or left/right reversal 

  of the image.



* When you are using the Modify Standard Paper Sizes function to create a 

  custom size with the one of the Wizard formats, the value displayed for the 

  print area may be smaller that the size of the actual printing area. 

  You may be able to enter a value smaller than the actual printing area. If 

  you enter values smaller than the actual printing area, the values will be 

  corrected internally and set to the minimum values allowed.



* If you change the media size in the page setup screen of AutoCAD 2005 /

  AutoCAD LT 2005 and the result of the change is not reflected on the drawing 

  screen, the change can be reflected properly by redrawing.



* With AutoCAD 2004 or AutoCAD LT 2004 if you open the printer environment 

  settings editor from the printer manager on the control panel and change 

  either Size or Source under Media the changes may not be reflected.

  In such a case open the printer environment setting editor from the page 

  setup menu for AutoCAD to do the change.



* Occasionally fine striped patterns may appear in the bitmap areas of images 

  that contain pasted bitmaps and printed with 2-level monochrome. 

  If this occurs, selecting 256-level grayscale may solve the problem.



* If you select Perceptual under Color Matching to print bitmap data pasted 

  into an image, the gradation levels in some areas may not appear natural.

  If this occurs, selecting Colorimetric under Color Matching may solve the 

  problem. 



* Occasionally dots may appear with some print data printed with 16777216 

  color.

  In such a case performing the print job with 256 color may solve the problem. 



* With AutoCAD 2000 or AutoCAD LT 2000, occasionally color may not be reflected 

  properly in printouts immediately after pasting bitmap images into the 

  drawing.

  In such a case, saving the drawing once, opening it again and then printing 

  again may solve the problem. 



* Printing may result in an error if the output destination is changed to 

  another port once it has already been set to output to a file and printing 

  has been started. 

  If an error results, open the HDI driver properties with the output 

  destination still changed, make any necessary changes, then save the changes 

  to update the printer environment settings file.



* If you encounter trouble while printing, try printing with Canon imagePROGRAF Printer Driver.



Copyright CANON INC. 2004-2009
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 0.93