ReadMe_English.txt Driver File Contents (iPF750-Drv-Win64-423.EXE)


                 Canon iPF750/iPF755 Printer Driver
                          Version 4.23
                       Instruction Manual



  1. Introduction
  2. System Requirements
  3. Cautions, Limitations and Restrictions

(Note) If you are using a Memo pad, put a check on Word Wrap in the menu.

1. Introduction -----------------------------------------------

Follow this procedure to install the printer driver for Windows software applications.

#  Trademarks and Notices
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Other products mentioned herein are registered trademarks of their respective companies.

2. System Requirements ----------------------------------------

The following hardware and software are recommended for this printer driver:

  Software:    Microsoft Windows Server 2008 64-bit edition, English edition
               Microsoft Windows Vista 64-bit edition, English edition
               Microsoft Windows Server 2003 Standard 64-bit edition /Enterprise x64 Edition, English edition
               Microsoft Windows XP Professional 64-bit edition, English edition

  Recommended operating environment
               CPU: Intel Pentium 4 or better
               Memory: 1 GB of RAM or more
               Available disk space: 10 GB (for B0 output) 

  Printers:    Canon imagePROGRAF iPF750/iPF755

(Note) This printer driver can be used only with software running on Windows Server 2008/Vista/Server 2003/XP 64-bit edition.
       This printer driver will operate only with the operating systems listed above.

3. Cautions, Limitations and Restrictions ----------------------

Note the following limitations when using the printer driver or printing a document with a printer.

In order to install the printer driver, you must log into the system as an Administrator.

Before installing this software, be sure to check the following. 
1. Close any application software running on your computer. 
2. If a document is being printed, either stop printing or wait for printing to end. 
3. Close all printer driver dialog boxes.

If the software application supports print copies, you can set up with either the application software or the printer driver.

When setting scaling with an application, make sure the printer driver scaling is set to 100%.

Some applications feature a function for collating. Do not use this function when Page Layout Printing is selected in Page Layout in the Layout sheet. If you do, the layout may not be correct.

When using scaling function, an error occurring from the difference between the degree of scaling and resolution may cause lines and other distortions to appear in the printout.

When printing reduced scaling color image data, 1 dot wide lines and points may not be printed.

Some applications may not print lines with almost horizontal angles correctly. If this occurs, redraw lines horizontally.

Immediately after installing the printer driver (including new editions), some application software may not be able to recognize new functions. Select Print in the File menu of all application software with a printer function, and then select the name of the printer you're using, and click the Properties button. When the Properties dialog box opens, click the OK button to close.

When binder printing with the Microsoft Binder, click off the check box for executing binder printing as one job. Each print job will be processed as a separate print job.

When a watermark is specified with too many letters, or with letters in very large font sizes, the watermark may not print.

Watermark text including F040 and up of external characters will not be printed.

For some applications, watermarks may print incorrectly for the first printing.

If you change the printer name in the General sheet of the printer driver's Properties dialog box, Profiles registered in the print driver become ineffective, so store your customized settings in a file before changing the printer name. After changing the printer name, load the stored file.

High resolution printing requires a large amount of computer memory. If there is very little computer memory available or you are using a large amount of application software, the application software may not operate normally. In this event, restart Windows and shut down any applications that are not being used when restarting printing. If printing still does not proceed normally, select a lower resolution in the Print Quality setting in the Main sheet.

With a local connection, if Enable bidirectional support in the Port sheet of the printer driver's Properties dialog box has no check mark, printer information and device information cannot be obtained normally.

When using a printer connected with USB, do not use Standby mode. You can set Standby mode in Power Options in Control Panel.

With Microsoft Excel, when Collate has a check mark and you perform multiple sheet printing or Entire workbook printing with different printing settings for each sheet, if you perform Page Layout Printing, the results may not be those intended.

When there is a large volume of print data, the printer may time out during printing and printing may not be possible. If this occurs, open the Advanced sheet in the printer driver Properties dialog box and tick the Start printing after last page is spooled checkbox in  Spool print documents so program finishes printing faster.

Thin line, gradation etc. printing may not be possible. If this occurs, open the printer driver's Properties dialog box from Print in the application software's File menu, and try printing following the steps below. 
1. Remove the check from Open Preview When Print Job Starts in the Main sheet. 
2. Remove the check from Page Layout in the Layout sheet.

When there is a large volume of print data, the printer may take time out during printing, and printing may not be possible. If this occurs, extending the Job Time Out set time with the printer's operation panel may enable printing.

You may not be able to print data for large size media with Adobe Illustrator and other software. If this occurs, try printing after performing the following. 
Open the Main sheet and untick the Open Preview checkbox. 
 -Increase the amount of memory allotted to virtual memory. 
 -Place or remove a check from the ON/OFF check box in Bitmap Printing in the Print dialog box when using Adobe Illustrator.

When installing this software from the installer, if you fail to follow the screen instruction to restart your computer, Microsoft Office may operate incorrectly. If this occurs, restart your computer.

To switch the units display between inches (US) and mm (Metric) for the Media Size settings and other displays, in the menu for the Regional Options in the OS control panel, select Input Locales.

If one printer is used with both USB and network connection, please install the imagePROGRAF Status Monitor.

For some applications, when using functions such as Scaling, N Pages per Sheet, and Edging, output with graphics data may diverge from the original.

Color settings dialog box can be performed for each object. However, with some software applications the print results may not be what you expect after text and graphic data handling.

When printing data that includes an extremely large image from a computer with little available memory, it may take time to print, a portion of the image may be missing, or it may otherwise not print properly. If this occurs, try printing after performing the following. 
 -Increase the amount of memory allotted to your computer. 
 -Increase your OS's virtual memory.

Do not change the Print Processor setting in the Advanced sheet in the printer driver's Properties dialog box. The following functions will not operate correctly if the setting is changed: 
 -The "Canon imagePROGRAF Preview" function

The "Canon imagePROGRAF Preview" function cannot be used in the following cases: 
 -When Pause Printing is selected after right-clicking the printer icon during a print job 
 -When Use Printer Offline is selected after right-clicking the printer icon during a print job 
 -At any time other than the time selected with Available from/To on the Advanced sheet of the printer properties dialog 
 -When Enable advanced printing features is switched off on the Advanced sheet of the printer properties dialog during a print job 
 -When Print directly to the printer is enabled on the Advanced sheet of the printer properties dialog during a print job 
 -When FILE: is selected as the printer port on the Ports sheet of the printer properties dialog
 -When Output to File is selected in the Print dialog box of the application software during a print job

If you install Point and Print, the "Canon imagePROGRAF Preview" function cannot be used.

If you used Photoshop for printing, tone jump may occur in the gradation of monochrome photographs.

Stamps and page borders may not be printed correctly when the following Print Quality settings are combined with large paper sizes:

The installer does not support Unicode. The installer may not operate correctly if Unicode is used for a printer's or shared printer's name. If the installer does not operate correctly, try the following. 
  -Change the printer name. 
  -Install the printer driver from Add Printer.

Images may not print centered in the middle if you have checked the box for Center Image  in the print preview window and have performed printing with Photoshop CS3. If you are unable to print, click the Page Setup button in the Photoshop print preview window, and print after making print settings.

Data created with Microsoft Word may not print properly when printing with Enlarged/Reduced Printing. If it does not print properly, select Enlarged/Reduced Printing from the Page Setup sheet for the printer driver, and then close the Print dialog box without proceeding to print. Open the printer driver settings window once more, close it with OK, and then proceed to print.

In “Canon imagePROGRAF Preview”, text, fine lines, etc. as displayed in the view screen display may differ from print results. In this instance, try opening the Special Settings dialog box in the Layout sheet and checking  Enable Preview Switching.

Copyright CANON INC. 2000-2009

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.42