_______________________________________________________________________________ Canon imagePROGRAF HDI Printer Driver Version 1.23.030 *** Copyright CANON INC. 2010 *** _______________________________________________________________________________ Contents 1. Introduction 2. System Requirements 3. Precautions During Installation 4. Cautions, Limitations and Restrictions 1. Introduction --------------------------------------------------------------- The Canon imagePROGRAF HDI printer driver (hereafter HDI driver) is a special printer driver compatible with HDI (Heidi Device Interface) of the architecture of CAD software applications, AutoCAD and AutoCAD LT (hereafter referred to together as "AutoCAD") supplied by Autodesk, Inc. <Trademarks> - Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON INC. - Microsoft and Windows are registered trademarks of the Microsoft Corporation in the United States and other countries. - Autodesk, AutoCAD, AutoCAD LT, and other Autodesk product names are trademarks or registered trademarks of Autodesk, Inc. in the United States and other countries. - All other trademarks and registered trademarks are the property of their respective owners. 2. System Requirements -------------------------------------------------------- The following hardware and software are recommended for this software. Operating Systems: Microsoft Windows 7, English edition Microsoft Windows Vista, English edition Microsoft Windows XP Professional/Home Edition, English edition (Note) - Windows versions other than English Windows cannot be used. - This printer cannot be used with Microsoft Windows 7/ Microsoft Windows Vista/Microsoft Windows XP 64-bit edition. AutoCAD Versions: AutoCAD 2011 / LT 2011 / DWG TrueView 2011 Recommended operating environment: Any computer running the software listed above Compatible Printers: Canon imagePROGRAF iPF500 Canon imagePROGRAF iPF600 Canon imagePROGRAF iPF700 Printer Driver: Canon imagePROGRAF Printer Driver 2006 V3.50 or later 3. Precautions During Installation -------------------------------------------- - For more about installation the procedure, please refer to the manual. - You must log into Windows as an Administrator before the installation. - Before performing the installation, close all the other application software. You cannot install with imagePROGRAF Status Monitor running. - If you are using an HDI driver with a version of AutoCAD/AutoCADLT/DWG TrueView undetectable at installation, install using the following procedure. (1) From File - Plotter Manager, select Add-A-Plotter Wizard (2) From the Plotter Model addition screen, select Have Disk (3) From the User Software CD (or when downloading, from the folder created after decompressing), select the install file from the applicable version folder appearing after the folder: English, and then continue by following the installation method in the user’s manual. 4. Cautions, Limitations and Restrictions ------------------------------------- Note the following limitations when using this software. - Some print data may cause shift in hatching patterns or left/right reversal of the image. - When you are using the Modify Standard Paper Sizes function to create a custom size with the one of the Wizard formats, the value displayed for the print area may be smaller that the size of the actual printing area. You may be able to enter a value smaller than the actual printing area. If you enter values smaller than the actual printing area, the values will be corrected internally and set to the minimum values allowed. - Occasionally fine striped patterns may appear in the bitmap areas of images that contain pasted bitmaps and printed with 2-level monochrome. If this occurs, selecting 256-level grayscale may solve the problem. - If you select Perceptual under Color Matching to print bitmap data pasted into an image, the gradation levels in some areas may not appear natural. If this occurs, selecting Colorimetric under Color Matching may solve the problem. - Occasionally dots may appear with some print data printed with 16777216 color. In such a case performing the print job with 256 color may solve the problem. - In AutoCAD 2011/LT 2011/DWG TrueView 2011, defects may occur if you print with Plot transparency set to ON. In that case, set Plot transparency to OFF. - Printing may result in an error if the output destination is changed to another port once it has already been set to output to a file and printing has been started. If an error results, open the HDI driver properties with the output destination still changed, make any necessary changes, then save the changes to update the printer environment settings file. - If you encounter trouble while printing, try printing with Canon imagePROGRAF Printer Driver.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.