Readme_Chinese_Simplified.txt Driver File Contents (iPF6300-PinCS4-Win-400.exe)

________________________________________________________________________________

   imagePROGRAF Print Plug-In Version 4.00
        (imagePROGRAF打印插件4.00版)

    *** CANON INC. 2004-2009 版权所有***
________________________________________________________________________________

目录

1. 介绍
2. 系统要求
3. 安装及卸载须知
4. 注意事项和限制


1. 介绍---------------------------------------------------------------------

imagePROGRAF Print Plug-In(imagePROGRAF打印插件)(以下称“Print Plug-In”)是专门用于 Adobe Photoshop(Adobe Systems Inc.的照片润饰软件)和Canon Digital Photo Professional的实用插件,通过使用该插件,可以在imagePROGRAF系列打印机上进行自定义打印。

商标及名称
- Canon、Canon标识、以及imagePROGRAF是CANON, INC.的商标。
- Microsoft和Windows是Microsoft Corporation在美国和其他国家的注册商标。
- Adobe和Photoshop是Adobe Systems Incorporated的商标。
- 其他产品名称可能是其各自所有者的商标或注册商标。

- 操作系统用下列缩写表示:
===================================================================
操作系统                                 缩写
===================================================================
Microsoft Windows 7                       Windows 7
Microsoft Windows Vista                  Windows Vista
Microsoft Windows XP                     Windows XP
Microsoft Windows 2000                   Windows 2000
===================================================================


2.系统要求 -----------------------------------------------------------

建议在以下硬件和软件上使用本软件:

操作系统
  <Photoshop (CS, CS2)>
        Windows XP Professional/Home Edition, 中文版本
        Windows 2000 Professional, 中文版本
  <Photoshop (CS3)>
        Windows 7, 中文版本
        Windows Vista, 中文版本
        Windows XP Professional/Home Edition, 中文版本
  <Photoshop (CS4)>
        Windows 7, 中文版本
        Windows 7 64位版, 中文版本 (注)
        Windows Vista, 中文版本
        Windows Vista 64位版, 中文版本 (注)
        Windows XP Professional/Home Edition, 中文版本
  <Digital Photo Professional>
        Windows 7, 中文版本
        Windows 7 64位版, 中文版本 (注)
        Windows Vista, 中文版本
        Windows Vista 64位版, 中文版本
        Windows XP Professional/Home Edition, 中文版本
        Windows 2000 Professional, 中文版本

(注)
  当在具有64位Windows OS的系统中安装Photoshop CS4时,
  会同时安装32位和64位版本的Photoshop CS4。
  Print Plug-In仅支持32位版本的Photoshop CS4。
  其不能在64位版本的Photoshop CS4中运行。

硬件
        可运行上述软件的任何计算机。 

软件 
        Photoshop (CS, CS2, CS3, CS4)
        Digital Photo Professional Ver. 3.7 版或更高版本

兼容打印机
        Canon imagePROGRAF iPF6300/6350

Printer Driver(打印机驱动程序)
        Canon imagePROGRAF Printer Driver  2009 V4.30 版或更高版本


3. 安装及卸载须知-------------------------------------------------------------

* 有关Print Plug-In安装和卸载步骤的详情,请参阅用户使用指南。

* 进行安装之前,请关闭所有其他应用程序软件。在运行imagePROGRAF Status Monitor的情况下不能进行安装。

* 安装前必须以管理员身份登录Windows。

(仅限Photoshop)
* 如果已安装Photoshop,但未经启动,请启动Photoshop,再将其关闭,然后再安装Print Plug-in。在已安装Photoshop但未经启动的环境下无法安装Print Plug-In。


4. 注意事项和限制--------------------------------------------------------------

使用本软件时,请注意以下限制。

* 请确认要用Print Plug-In管理的数据为RGB/灰色 8比特或RGB/灰色 16比特图像数据。
  Print Plug-In不能处理CMYK、或Lab数据。

* 专色通道元素将被忽略,然后打印数据。

* Print Plug-In for Photoshop可处理宽度和高度低于60,000像素的图像。
  要处理宽度和高度高于60,000像素的图像,请只选择图像的一小部分进行处理,或处理整个图像以减小图像尺寸。

* Print Plug-In for Digital Photo Professional可处理宽度和高度低于6,000像素的图像。
  要处理宽度和高度高于6,000像素的图像,请只选择图像的一小部分进行处理,或处理整个图像以减小图像尺寸。

* 无法同时从多个Print Plug-In输出。

* 运行Media Configuration Tool(介质配置工具)时,Print Plug-In无法正常工作。使用Print Plug-In之前,请关闭Media Configuration Tool。

* 实际打印结果可能会与预览显示或[页面设置]页内打印版式选定的设置值有所不同。

* 不能打印长度超过18米的图像。如果试图打印长度超过18米的图像,该图像将被缩短至18米。

* 对于某些介质类型,如果图像尺寸较小,打印图像的底部可能会出现空白。

* 对于[颜色设置]页上的某些设置,某些图像的空白区内可能会出现各种颜色。如果发生这种情况,请将[颜色设置]页上的[饱和度]设置到接近零的位置。

* 即使已经选择了[在预览中进行校样],监视器、室内光线或使用的ICC特征仍可能导致打印结果的颜色与期望效果之间存在差距。

* 当打印机正在取消上一个打印作业时,如果 Print Plug-In 开始打印,打印机可能会失去控制。
  确保打印机能够进行打印,然后启动下一个打印。

* 有时打印机会无法在插件所选择纸张尺寸的纸源上进行打印。有关详情,请参阅打印机的用户使用指南。

* 如果您使用Windows Vista/Windows 7,输出端口不能够指定[FILE]。

* 务必退出Print Plug-In 之后,再卸载Print Plug-In。


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.57