Readme_Chinese_Simplified.txt Driver File Contents (iPF5000-PinP3-Win-206.exe)

________________________________________________________________________________

   imagePROGRAF Print Plug-In Version 2.06
        (imagePROGRAF打印插件2.06版)

    *** CANON INC. 2004-2009 版权所有***
________________________________________________________________________________

目录

1. 介绍
2. 系统要求
3. 安装及卸载须知
4. 注意事项和限制


1. 介绍---------------------------------------------------------------------

imagePROGRAF Print Plug-In(imagePROGRAF打印插件)(以下称“Print Plug-In”)是专门用于 Adobe Photoshop(Adobe Systems Inc.的照片润饰软件)和Canon Digital Photo Professional的实用插件,通过使用该插件,可以在imagePROGRAF系列打印机上进行自定义打印。

商标及名称
- Canon、Canon标识、以及imagePROGRAF是CANON, INC.的商标。
- Microsoft和Windows是Microsoft Corporation在美国和其他国家的注册商标。
- Adobe和Photoshop是Adobe Systems Incorporated的商标。
- 其他产品名称可能是其各自所有者的商标或注册商标。

- 操作系统用下列缩写表示:
===================================================================
操作系统                                 缩写
===================================================================
Microsoft Windows 7                       Windows 7
Microsoft Windows Vista                  Windows Vista
Microsoft Windows XP                     Windows XP
Microsoft Windows 2000                   Windows 2000
===================================================================


2.系统要求 -----------------------------------------------------------

建议在以下硬件和软件上使用本软件:

操作系统
  <Photoshop (CS3)>
        Windows 7, 中文版本
        Windows Vista, 中文版本
        Windows XP Professional/Home Edition, 中文版本
  <Photoshop (CS4)>
        Windows 7, 中文版本
        Windows 7 64位版, 中文版本 (注)
        Windows Vista, 中文版本
        Windows Vista 64位版, 中文版本 (注)
        Windows XP Professional/Home Edition, 中文版本
  <Digital Photo Professional>
        Windows 7, 中文版本
        Windows 7 64位版, 中文版本 (注)
        Windows Vista, 中文版本
        Windows Vista 64位版, 中文版本
        Windows XP Professional/Home Edition, 中文版本
        Windows 2000 Professional, 中文版本

(注)
  当在具有64位Windows OS的系统中安装Photoshop CS4时,
  会同时安装32位和64位版本的Photoshop CS4。
  Print Plug-In仅支持32位版本的Photoshop CS4。
  其不能在64位版本的Photoshop CS4中运行。

硬件
        可运行上述软件的任何计算机。 

软件 
        Photoshop (CS3, CS4)
        Digital Photo Professional Ver. 3.7 版或更高版本

兼容打印机
        Canon imagePROGRAF iPF5000

Printer Driver(打印机驱动程序)
        Canon imagePROGRAF Printer Driver  2007 V3.50 版或更高版本


3. 安装及卸载须知-------------------------------------------------------------

* 有关Print Plug-In安装和卸载步骤的详情,请参阅用户使用指南。

* 进行安装之前,请关闭所有其他应用程序软件。在运行imagePROGRAF Status Monitor的情况下不能进行安装。

* 安装前必须以管理员身份登录Windows。

(仅限Photoshop)
* 如果已安装Photoshop,但未经启动,请启动Photoshop,再将其关闭,然后再安装Print Plug-in。在已安装Photoshop但未经启动的环境下无法安装Print Plug-In。


4. 注意事项和限制--------------------------------------------------------------

使用本软件时,请注意以下限制。

* 请确认要用Print Plug-In管理的数据为RGB/灰色 8比特或RGB/灰色 16比特图像数据。
  Print Plug-In不能处理CMYK、或Lab数据。

* 专色通道元素将被忽略,然后打印数据。

* Print Plug-In for Photoshop可处理宽度和高度低于60,000像素的图像。
  要处理宽度和高度高于60,000像素的图像,请只选择图像的一小部分进行处理,或处理整个图像以减小图像尺寸。

* Print Plug-In for Digital Photo Professional可处理宽度和高度低于6,000像素的图像。
  要处理宽度和高度高于6,000像素的图像,请只选择图像的一小部分进行处理,或处理整个图像以减小图像尺寸。

* 无法同时从多个Print Plug-In输出。

* 运行Media Configuration Tool(介质配置工具)时,Print Plug-In无法正常工作。使用Print Plug-In之前,请关闭Media Configuration Tool。

* 实际打印结果可能会与预览显示或[页面设置]页内打印版式选定的设置值有所不同。

* 不能打印长度超过18米的图像。如果试图打印长度超过18米的图像,该图像将被缩短至18米。

* 对于某些介质类型,如果图像尺寸较小,打印图像的底部可能会出现空白。

* 对于[颜色设置]页上的某些设置,某些图像的空白区内可能会出现各种颜色。如果发生这种情况,请将[颜色设置]页上的[饱和度]设置到接近零的位置。

* 即使已经选择了[在预览中进行校样],监视器、室内光线或使用的ICC特征仍可能导致打印结果的颜色与期望效果之间存在差距。

* 当打印机正在取消上一个打印作业时,如果 Print Plug-In 开始打印,打印机可能会失去控制。
  确保打印机能够进行打印,然后启动下一个打印。

* 有时打印机会无法在插件所选择纸张尺寸的纸源上进行打印。有关详情,请参阅打印机的用户使用指南。

* 如果您使用Windows Vista/Windows 7,输出端口不能够指定[FILE]。

* 务必退出Print Plug-In 之后,再卸载Print Plug-In。

* 用Photoshop 6.0~CS2的Plug-In不可以使用Photoshop CS3/CS4创建的收藏夹和历史。


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.10