___________________________________________________________
imagePROGRAF Device Setup Utility Version 4.20
*** Copyright CANON INC. 2010 ***
___________________________________________________________
Overview
1. Introduction
2. System Requirements
3. Cautions, Limitations and Restrictions
1. Introduction ---------------------------------------------------------------
The imagePROGRAF Device Setup Utility is the software application that enables
your computer to communicate with the printer.
You can use this utility on your computer to do the basic settings such as
entering the printer IP address or selecting the network frame type.
<Trademarks>
- Canon is a registered trademark of Canon Inc.
- Microsoft and Windows are registered trademarks of Microsoft Corporation in
the United States and other countries.
- NetWare is a registered trademark of Novell, Inc., in the United States
and/or other countries.
- All other trademarks and registered trademarks are the property of their
respective owners.
2. System Requirements --------------------------------------------------------
The following hardware and software are recommended for this software.
Software: Microsoft Windows 7, English edition
Microsoft Windows 7, 64-bit edition, English edition
Microsoft Windows Server 2008, English edition
Microsoft Windows Server 2008 64-bit edition, English edition
Microsoft Windows Vista, English edition
Microsoft Windows Vista 64-bit edition, English edition
Microsoft Windows Server 2003, English edition
Microsoft Windows Server 2003 64-bit edition, English edition
Microsoft Windows XP Professional/Home Edition, English edition
Microsoft Windows XP Professional 64-bit edition, English edition
Microsoft Windows 2000 Professional /Server , English edition
Hardware: Any computer running the software listed above.
Protocols: TCP/IP
Printers:
Canon imagePROGRAF iPF500
Canon imagePROGRAF iPF510
Canon imagePROGRAF iPF5000
Canon imagePROGRAF iPF5100
Canon imagePROGRAF iPF600
Canon imagePROGRAF iPF605
Canon imagePROGRAF iPF610
Canon imagePROGRAF iPF650
Canon imagePROGRAF iPF655
Canon imagePROGRAF iPF6000S
Canon imagePROGRAF iPF6100
Canon imagePROGRAF iPF6200
Canon imagePROGRAF iPF6300
Canon imagePROGRAF iPF6350
Canon imagePROGRAF iPF700
Canon imagePROGRAF iPF710
Canon imagePROGRAF iPF720
Canon imagePROGRAF iPF750
Canon imagePROGRAF iPF755
Canon imagePROGRAF iPF810
Canon imagePROGRAF iPF820
Canon imagePROGRAF iPF8000
Canon imagePROGRAF iPF8000S
Canon imagePROGRAF iPF8010S
Canon imagePROGRAF iPF8100
Canon imagePROGRAF iPF8110
Canon imagePROGRAF iPF8300
Canon imagePROGRAF iPF8310
Canon imagePROGRAF iPF9000
Canon imagePROGRAF iPF9000S
Canon imagePROGRAF iPF9010S
Canon imagePROGRAF iPF9100
Canon imagePROGRAF iPF9110
Canon imagePROGRAF LP17
Canon imagePROGRAF LP24
Canon Large Format Printer W6400 (Dye Ink Model)
Canon Large Format Printer W6400 (Pigment Ink Model)
Canon Large Format Printer W8400 (Dye Ink Model)
Canon Large Format Printer W8400 (Pigment Ink Model)
(Some printer models are available in the limited countries or areas.)
(Note)
- Windows versions other than English Windows cannot be used.
3. Cautions, Limitations and Restrictions --------------------------------------
Note the following limitations when using this software.
* You must log into Windows as an Administrator before the installation.
* You must deactivate the block on the software in the Windows firewall
function to use imagePROGRAF Device Setup Utility.
* For more information on the Windows firewall function, refer to the Windows
help or the Windows manual.
* If you have set an address such as 0.x.x.x from the printer panel, it may
not be possible to detect the printer from the Device Setup Utility.
In this event, reset the IP address from the printer panel.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.