/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \page Page_Migration Migrating from Older Versions * * Below is migration information for updating existing projects based on previous versions of the LUFA library * to the next version released. It does not indicate all new additions to the library in each version change, only * areas relevant to making older projects compatible with the API changes of each new release. * * \section Sec_Migration090510 Migrating from 090401 to 090510 * * <b>All</b> * - The ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all * BUTTLOADTAG elements, or download and extract ButtLoadTag.h header from the ButtLoad project. * - The Drivers/AT90USBXXX directory has been renamed to Drivers/Peripheral. * - The Serial_Stream driver has been renamed to SerialStream to remain consistent with the rest of the library naming scheme. * - The HWB driver has changed to the Buttons driver. See the board Buttons driver documentation for the new API. * * <b>Dual Role Mode</b> * - The USB_PowerOnFail even has been renamed to USB_InitFailure. * - The functions in OTG.h have been renamed to remain more consistent with the library API. See the functions in OTG.h for more * details. * * <b>Library Demos</b> * - Most demos, bootloaders and applications have had significant changes from previous versions. Applications built off of any * library demos should update to the latest versions. * * <b>Device Mode</b> * - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT() * macros. See Endpoint.h documentation for more details on the new endpoint management macros. * - The Endpoint_ReadWriteAllowed() macro has been renamed to Endpoint_IsReadWriteAllowed() to be more consistent with the rest of * the API naming scheme. * - The Endpoint_IsSetupINReady() and Endpoint_IsSetupOutReceived() macros have been renamed to Endpoint_IsINReady() and * Endpoint_IsOUTReceived() respectively. * - The Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(). * - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearSETUP(). * - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as Endpoint_Read_Word()) have * been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions. * - The USB_UnhandledControlPacket event no longer has any parameters. User code should no longer attempt to read in the remainder of * the Control Request header as all Control Request header data is now preloaded by the library and made available in the * USB_ControlRequest structure. * - The FEATURELESS_CONTROL_ONLY_DEVICE token has been renamed to CONTROL_ONLY_DEVICE. * - The STATIC_ENDPOINT_CONFIGURATION is no longer applicable as the library will apply this optimization when appropriate automatically. * - The values of the Endpoint_Stream_RW_ErrorCodes_t and Endpoint_ControlStream_RW_ErrorCodes_t enums have had the "ERROR_" portion * of their names removed. * * <b>Host Mode</b> * - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0) to allow it to be used on * other control type pipes. Care should be taken to ensure that the Control pipe is always selected before the function is called * in existing projects where the Control pipe is to be operated on. * - The USB Host management task now saves and restores the currently selected pipe before and after the task runs. Projects no longer * need to manage this manually when calling the USB management task. * - The Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See * Pipe.h documentation for more details on the new pipe management macros. * - The Pipe_ReadWriteAllowed() macro has been renamed to Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API * naming scheme. * - The Pipe_IsSetupINReceived() and Pipe_IsOutReady() macros have been renamed to Pipe_IsINReceived() and Pipe_IsOUTReady() * respectively. * - The new Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous Pipe_ClearSetupOUT() macro. * - The Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent(). * - The Pipe_ClearSetupSent() macro is no longer applicable and should be removed. * - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as Pipe_Read_Word()) have * been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions. * - The Host_IsResetBusDone() macro has been renamed to Host_IsBusResetComplete(). * - The Pipe_Ignore_Word() and Pipe_Ignore_DWord() functions have been renamed to Pipe_Discard_Word() and Pipe_Discard_DWord() to remain * consistent with the rest of the pipe API. * - It is no longer needed to manually include the headers from LUFA/Drivers/USB/Class, as they are now included along with the rest * of the USB headers when LUFA/Drivers/USB/USB.h is included. * - Functions in the ConfigDescriptor.h header file no longer have "Host_" as part of their names. * - The ProcessHIDReport() has been renamed to USB_ProcessHIDReport(), GetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo() * and SetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo(). * - The values of the DSearch_Return_ErrorCodes_t and DSearch_Comp_Return_ErrorCodes_t enums have had their respective "Descriptor_Search" * and "Descriptor_Search_Comp" prefixes changed to all caps. * - The USB_HostRequest global has been renamed to USB_ControlRequest, and is used in Device mode also. The USB_Host_Request_Header_t * structure type has been renamed to USB_Request_Header_t. * - The values of the Pipe_Stream_RW_ErrorCodes_t enum have had the "ERROR_" portion of their names removed. * * * \section Sec_Migration090401 Migrating from 090209 to 090401 * * <b>All</b> * - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant "F_CLOCK", * defined in the project makefile and passed to the compiler via the -D switch. * - The makefile EEPROM programming targets for FLIP and dfu-programmer no longer program in the FLASH data in addition to the * EEPROM data into the device. If both are to be programmed, both the EEPROM and FLASH programming targets must be called. * - As the avr-libc macro has been corrected in recent avr-libc distributions, the SetSystemClockPrescaler() macro has been removed. * Include <avr/power.h> and call clock_prescale_set(clock_div_1); instead on recent avr-libc distributions. * * <b>Library Demos</b> * - The USBtoSerial demo now discards all data when not connected to a host, rather than buffering it for later transmission. * - Most demos, bootloaders and applications have had their control request handling code corrected, to properly send the status * stage in all handled requests. If you are using code based off one of the library demos, bootloaders or applications, you should * update to the latest revisions. * * <b>Non-USB Library Components</b> * - The ATTR_ALWAYSINLINE function attribute macro has been renamed to ATTR_ALWAYS_INLINE. * - Custom board Dataflash drivers now require the implementation of Dataflash_SelectChipFromPage() and Dataflash_SendAddressBytes(). * * <b>Device Mode</b> * - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded * to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the * NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the FEATURELESS_CONTROL_ONLY_DEVICE token with no further * modifications required. * * * \section Sec_Migration090209 Migrating from 081217 to 090209 * * <b>Device Mode</b> * - The ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of ENDPOINT_TOTAL_ENDPOINTS. * - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user * makefile if desired to restore the previous 50ms timeout. * * <b>Host Mode</b> * - The PIPE_MAX_ENDPOINTS constant has been renamed to the more appropriate name of PIPE_TOTAL_ENDPOINTS. * - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user * makefile if desired to restore the previous 50ms timeout. * - The USB_DeviceEnumerationFailed event now contains a second "SubErrorCode" parameter, giving the error code of the function * which failed. * - The HID_PARSE_Sucessful enum member constant has been corrected to HID_PARSE_Successful. * * <b>Non-USB Library Components</b> * - The previous SPI_SendByte() functionality is now located in SPI_TransferByte(). SPI_SendByte() now discards the return byte * for speed, to compliment the new SPI_ReceiveByte() function. If two-way SPI transfers are required, calls to SPI_SendByte() * should be changed to SPI_TransferByte(). * - The serial driver now sets the Tx line as an output explicitly, and enables the pullup of the Rx line. * - The Serial_Init() and SerialStream_Init() functions now take a second DoubleSpeed parameter, which indicates if the USART * should be initialized in double speed mode - useful in some circumstances for attaining baud rates not usually possible at * the given AVR clock speed. * * <b>Library Demos</b> * - Most library demos have been enhanced and/or had errors corrected. All users of all demos should upgrade their codebase to * the latest demo versions. * * * \section Sec_Migration171208 Migrating from V1.5.3 to 081217 * * <b>All</b> * - The MyUSB project name has been changed to LUFA (Lightweight Framework for USB AVRs). All references to MyUSB, including macro names, * have been changed to LUFA. * * <b>Library Demos</b> * - The ReconfigureUSART() routine in the USBtoSerial demo was not being called after new line encoding * parameters were set by the host. Projects built on the USBtoSerial code should update to the latest version. * - The HID Parser now supports multiple report (on a single endpoint) HID devices. The MouseHostWithParser and * KeyboardHostWithPaser demos use the updated API functions to function correctly on such devices. Projects * built on either "WithParser" demo should update to the latest code. * - The RNDIS demo TCP stack has been modified so that connections can be properly closed. It is still not * recommended that the MyUSB RNDIS demo TCP/IP stack be used for anything other than demonstration purposes, * as it is neither a full nor a standards compliant implementation. * * <b>Non-USB Library Components</b> * - The Serial_IsCharRecieved() macro has been changed to the correct spelling of Serial_IsCharReceived() in Serial.h. * * <b>Device Mode</b> * - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask * to be used in the Options parameter of the USB_Init() function. * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is * currently initialized. * - Interrupts are now disabled when processing control requests, to avoid problems with interrupts causing the library * or user request processing code to exceed the strict USB timing requirements on control transfers. * - The USB Reset event now resets and disables all device endpoints. If user code depends on endpoints remaining configured * after a Reset event, it should be altered to explicitly re-initialize all user endpoints. * - The prototype for the GetDescriptor function has been changed, as the return value was redundant. The function now * returns the size of the descriptor, rather than passing it back via a parameter, or returns NO_DESCRIPTOR if the specified * descriptor does not exist. * - The NO_DESCRIPTOR_STRING macro has been renamed NO_DESCRIPTOR, and is now also used as a possible return value for the * GetDescriptor function. * * <b>Host Mode</b> * - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask * to be used in the Options parameter of the USB_Init() function. * - The HID report parser now supports multiple Report IDs. The HID report parser GetReportItemInfo() and * SetReportItemInfo() routines now return a boolean, set if the requested report item was located in the * current report. If sending a report to a multi-report device, the first byte of the report is automatically * set to the report ID of the given report item. * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is * currently initialized. * * * \section Sec_Migration152 Migrating from V1.5.2 to V1.5.3 * * <b>Library Demos</b> * - Previously, all demos contained a serial number string descriptor, filled with all zeros. A serial number * string is required in Mass Storage devices, or devices which are to retain settings when moved between * ports on a machine. As people were not changing the serial number value, this was causing conflicts and so * the serial number descriptor has been removed from all but the Mass Storage demo, which requires it. * - The AudioOut and AudioIn demos did not previously silence their endpoints when the host has deactivated * them. Projects built upon either demo should upgrade to the latest code. * - The FEATURE_ENDPOINT macro has been renamed FEATURE_ENDPOINT_HALT, and is now correctly documented. * - The MassStoreHost demo contained errors which caused it to lock up randomly on certain devices. Projects built * on the MassStoreDemo code should update to the latest version. * - The Interrupt type endpoint in the CDC based demos previously had a polling interval of 0x02, which caused * problems on some Linux systems. This has been changed to 0xFF, projects built on the CDC demos should upgrade * to the latest code. * - The HID keyboard and mouse demos were not previously boot mode compatible. To enable boot mode support, projects * built on the keyboard or mouse demos (or derivatives) should upgrade to the latest code. * - The Mass Storage demo was not previously standards compliant. Projects built on the Mass Storage demo should * upgrade to the latest code. * - The USART was not being reconfigured after the host sent new encoding settings in the USBtoSerial demo. This was * previously discovered and fixed, but the change was lost. Projects built on the USBtoSerial demo should update * to the latest code. * * <b>Device Mode</b> * - The endpoint non-control stream functions now have a default timeout of 50ms between packets in the stream. * If this timeout is exceeded, the function returns the new ENDPOINT_RWSTREAM_ERROR_Timeout error value. The * timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired * timeout duration in ms. * - Rather than returning fixed values, the flags indicating if the device has Remote Wakeup currently enabled * and/or is self-powered are now accessed and set through the new USB_RemoteWakeupEnabled and * USB_CurrentlySelfPowered macros. See the DevChapter9.h documentation for more details. * - All endpoint stream functions now require an extra Callback function parameter. Existing code may be updated * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing * the token NO_STREAM_CALLBACKS to the compiler using the -D switch. * * <b>Host Mode</b> * - The pipe non-control stream functions now have a default timeout of 50ms between packets in the stream. * If this timeout is exceeded, the function returns the new PIPE_RWSTREAM_ERROR_Timeout error value. The * timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired * timeout duration in ms. * - CollectionPath_t has been renamed to HID_CollectionPath_t to be more in line with the other HID parser structures. * - All pipe stream functions now require an extra Callback function parameter. Existing code may be updated * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing * the token NO_STREAM_CALLBACKS to the compiler using the -D switch. * * * \section Sec_Migration151 Migrating from V1.5.1 to V1.5.2 * * <b>Library Demos</b> * - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations * of the RNDIS specification, which had non-standard behaviour. Projects built upon the demo should upgrade * to the latest code. * - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where * possible any existing devices upgrade to the latest bootloader code. * * * \section Sec_Migration150 Migrating from V1.5.0 to V1.5.1 * * <b>Library Demos</b> * - The USBtoSerial demo was broken in the 1.5.0 release, due to incorrect register polling in place of the * global "Transmitting" flag. The change has been reverted in this release. Projects built upon the demo * should upgrade to the latest code. * - The HID class demos did not implement the mandatory GetReport HID class request. Projects built upon the HID * demos should upgrade to the latest code. * - The HID class demos incorrectly reported themselves as boot-protocol enabled HID devices in their descriptors. * Projects built upon the HID demos should upgrade to the latest code. * - The MIDI device demo had incorrect AudioStreaming interface descriptors. Projects built upon the MIDI demo * should upgrade to the latest code. * - The AudioOut demo did not correctly tristate the speaker pins when USB was disconnected, wasting power. * Projects built upon the AudioOut demo should upgrade to the latest code. * * * \section Sec_Migration141 Migrating from V1.4.1 to V1.5.0 * * <b>Library Demos</b> * - Previous versions of the library demos had incorrectly encoded BCD version numbers in the descriptors. To * avoid such mistakes in the future, the VERSION_BCD macro has been added to StdDescriptors.h. Existing * projects should at least manually correct the BCD version numbers, or preferably update the descriptors to * encode the version number in BCD format using the new macro. * - The mandatory GetReport class-specific request was accidentally omitted from previous versions of the demos * based on the Human Interface Device (HID) class. This has been corrected, and any user projects based on the * HID demos should also be updated accordingly. * - The CDC demos now correctly send an empty packet directly after a full packet, to end the transmission. * Failure to do this on projects which always or frequently send full packets will cause buffering issues on * the host OS. All CDC user projects are advised to update their transmission routines in the same manner as * the library CDC demos. * - The previous interrupt-driven Endpoint/Pipe demos did not properly save and restore the currently selected * Endpoint/Pipe when the ISR fired. This has been corrected - user projects based on the interrupt driven * demos should also update to properly save and restore the selected Endpoint/Pipe. * * <b>Non-USB Library Components</b> * - The Atomic.h and ISRMacro.h header files in MyUSB/Common have been removed, as the library is now only * compatible with avr-libc library versions newer than the time before the functionality of the deleted * headers was available. * * <b>Device Mode</b> * - The GetDescriptor function (see StdDescriptors.h) now has a new prototype, with altered parameter names and * functions. Existing projects will need to update the GetDescriptor implementation to reflect the new API. * The previously split Type and Index parameters are now passed as the original wValue parameter to the * function, to make way for the USB specification wIndex parameter which is <i>not</i> the same as the * previous Index parameter. * - The USB_UnhandledControlPacket event (see Events.h) now has new parameter names, to be in line with the * official USB specification. Existing code will need to be altered to use the new parameter names. * - The USB_CreateEndpoints event (see Events.h) has been renamed to USB_ConfigurationChanged, which is more * appropriate. It fires in an identical manner to the previously named event, thus the only change to be made * is the event name itself in the user project. * - The USB_Descriptor_Language_t structure no longer exists in StdDescriptors.h, as this was a * pseudo-descriptor modelled on the string descriptor. It is replaced by the true USB_Descriptor_String_t type * descriptor as indicated in the USB specification, thus all device code must be updated accordingly. * - The names of several Endpoint macros have been changed to be more consistent with the rest of the library, * with no implementation changes. This means that existing code can be altered to use the new macro names * with no other considerations required. See Endpoint.h for the new macro names. * - The previous version of the MassStorage demo had an incorrect value in the SCSI_Request_Sense_Response_t * structure named SenseData in SCSI.c which caused some problems with some hosts. User projects based on this * demo should correct the structure value to maintain compatibility across multiple OS platforms. * - By default, the descriptor structures use the official USB specification names for the elements. Previous * versions of the library used non-standard (but more verbose) names, which are still usable in the current * and future releases when the correct compile time option is enabled. See the StdDescriptors.h file * documentation for more details. * * <b>Host Mode</b> * - The USB_Host_Request_Header_t structure in HostChapter9.h (used for issuing control requests) has had its * members renamed to the official USB specification names for requests. Existing code will need to be updated * to use the new names. * - The names of several Pipe macros have been changed to be more consistent with the rest of the library, * with no implementation changes. This means that existing code can be altered to use the new macro names * with no other considerations required. See Pipe.h for the new macro names. * - By default, the descriptor structures use the official USB specification names for the elements. Previous * versions of the library used non-standard (but more verbose) names, which are still usable in the current * and future releases when the correct compile time option is enabled. See the StdDescriptors.h file * documentation for more details. * - The names of the macros in Host.h for controlling the SOF generation have been renamed, see the Host.h * module documentation for the new macro names. * * <b>Dual Role Mode</b> * - The OTG.h header file has been corrected so that the macros now perform their stated functions. Any existing * projects using custom headers to fix the broken OTG header should now be altered to once again use the OTG * header inside the library. * - The USB_DeviceEnumerationComplete event (see Events.h) now also fires in Device mode, when the host has * finished enumerating the device. Projects relying on the event only firing in Host mode should be updated * so that the event action only occurs when the USB_Mode global is set to USB_MODE_HOST. */Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.