1. LUFA-090510.zip Driver
2. GenericHIDHost.txt File Contents

GenericHIDHost.txt Driver File Contents (LUFA-090510.zip)

/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */
 
/** \mainpage Generic HID Host Demo
 *
 *  \section SSec_Info USB Information:
 *
 *  The following table gives a rundown of the USB utilization of this demo.
 *
 *  <table>
 *   <tr>
 *    <td><b>USB Mode:</b></td>
 *    <td>Host</td>
 *   </tr>
 *   <tr>
 *    <td><b>USB Class:</b></td>
 *    <td>Human Interface Device (HID)</td>
 *   </tr>
 *   <tr> 
 *    <td><b>USB Subclass:</b></td>
 *    <td>N/A</td>
 *   </tr>
 *   <tr>
 *    <td><b>Relevant Standards:</b></td>
 *    <td>USBIF HID Specification, USBIF HID Usage Tables</td>
 *   </tr>
 *   <tr>
 *    <td><b>Usable Speeds:</b></td>
 *    <td>Low Speed Mode, Full Speed Mode</td>
 *   </tr>
 *  </table>
 *
 *  \section SSec_Description Project Description: 
 *
 *  Generic HID host demonstration application. This gives a simple reference
 *  application for implementing a Generic HID USB host, for any device implementing
 *  the HID profile.
 *
 *  Received reports from the attached device are printed to the serial port.
 *  
 *  \section SSec_Options Project Options
 *
 *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
 *
 *  <table>
 *   <tr>
 *    <td><b>Define Name:</b></td>
 *    <td><b>Location:</b></td>
 *    <td><b>Description:</b></td>
 *   </tr>
 *   <tr>
 *    <td>INTERRUPT_DATA_ENDPOINT</td>
 *    <td>Makefile CDEFS</td>
 *    <td>When defined, this causes the demo to enable interrupts for the data IN pipe,
 *        which services reports from the device. If not defined, the data pipe is
 *        serviced via polling using the task scheduler.</td>
 *   </tr>
 *  </table>
 */