;------------------------------------------------------------------------
;
; Copyright and Disclaimer:
;
; ---------------------------------------------------------------
; This software is provided "as is" without warranty of any kind,
; either expressed or implied, including but not limited to the
; implied warranties of merchantability and/or fitness for a
; particular purpose.
;
; Copyright (c) 2007-2010 Hauppauge Computer Works, Inc.
; All Rights Reserved.
; ---------------------------------------------------------------
;
; Abstract:
;
; This is the WinTV 23885/7/8 Consumer IR driver inf file.
;
;------------------------------------------------------------------------
[Version]
Signature="$CHICAGO$"
Class=HIDClass
ClassGuid={745a17a0-74d3-11d0-b6fe-00a0c90f57da}
Provider="Hauppauge"
DriverVer=08/27/2010,1.47.28239
CatalogFile=hcw85c64.cat
DriverPackageType=PlugAndPlay
DriverPackageDisplayName="WinTV CIR (885/7/8)"
[Manufacturer]
"Hauppauge"=Hauppauge,NTamd64.6,NTamd64
[DestinationDirs]
DefaultDestDir = 12
IR_CoInstaller_CopyFiles = 11
IR_CoInstallerXP_CopyFiles = 11
[SourceDisksNames.amd64]
1=%p2.InstallDisk64%,,,"Driver85\64bit"
[SourceDisksFiles]
hcw85cir.sys = 1,,
hcw85cir.dll = 1,,
hcw85wdf_01005.dll = 1,,
;[Hauppauge]
;%HCW85CIR.DeviceDesc%=hcw85cir_DeviceXP, AVSTREAM\HCW85CIR3
[Hauppauge.NTamd64]
%HCW85CIR.DeviceDesc%=hcw85cir_DeviceXP, AVSTREAM\HCW85CIR3
[Hauppauge.NTamd64.6]
%HCW85CIR.DeviceDesc%=hcw85cir_Device, AVSTREAM\HCW85CIR3
[hcw85cir_DeviceXP.NT]
CopyFiles=Drivers_Dir
[hcw85cir_DeviceXP.NT.HW]
AddReg=hcw85cir_Device.NT.AddReg
[hcw85cir_Device.NT]
CopyFiles=Drivers_Dir
[hcw85cir_Device.NT.HW]
AddReg=hcw85cir_Device.NT.AddReg
[hcw85cir_Device.NT.AddReg]
HKR,,DeviceCharacteristics,0x10001,0x0100 ; Use same security checks on relative opens
HKR,,Security,,"D:P(A;;GA;;;BA)(A;;GA;;;SY)(A;;GA;;;WD)" ; Allow generic-all access to Built-in administrators, Local system and world
;; I2C Expander Details
;HKR,"CIRData","i2c_gpio_expander_address", 0x00010001, 0xFF, 0x00, 0x00, 0x00
;HKR,"CIRData","i2c_gpio_expander_bus", 0x00010001, 0xFF, 0x00, 0x00, 0x00
;; Receive IR Details
;HKR,"CIRData","narrow_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
;HKR,"CIRData","wide_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
;HKR,"CIRData","priority_receive_ir_enable_gpio_bit", 0x00010001, 0x0C, 0x00, 0x00, 0x00
;HKR,"CIRData","priority_receive_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
;; Total no of Transmitter
;HKR,"CIRData","total_number_of_transmitters", 0x00010001, 0x02, 0x00, 0x00, 0x00
;; Transmitter 1 Details
;HKR,"CIRData","transmit_1_ir_pin", 0x00010001, 0x14, 0x00, 0x00, 0x00
;HKR,"CIRData","transmit_1_ir_enable_gpio_bit", 0x00010001, 0x06, 0x00, 0x00, 0x00
;HKR,"CIRData","transmit_1_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
;; Transmitter 2 Details
;HKR,"CIRData","transmit_2_ir_pin", 0x00010001, 0x14, 0x00, 0x00, 0x00
;HKR,"CIRData","transmit_2_ir_enable_gpio_bit", 0x00010001, 0x06, 0x00, 0x00, 0x00
;HKR,"CIRData","transmit_2_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
;; Transmit detect details
;HKR,"CIRData","transmit_detect_gpio_bit", 0x00010001, 0x0B, 0x00, 0x00, 0x00
;; Led control details
;HKR,"CIRData","led_gpio_bit", 0x00010001, 0x08, 0x00, 0x00, 0x00
;HKR,"CIRData","led_gpio_on_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
;;;Medford2 - set GPIOs (host based)
HKR,"CIRData_27","i2c_gpio_expander_address", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_27","narrow_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
HKR,"CIRData_27","wide_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
HKR,"CIRData_27","priority_receive_ir_enable_gpio_bit", 0x00010001, 0x2b, 0x00, 0x00, 0x00
HKR,"CIRData_27","priority_receive_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_27","total_number_of_transmitters", 0x00010001, 0x02, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_1_ir_pin", 0x00010001, 0x14, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_1_ir_enable_gpio_bit", 0x00010001, 0x29, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_1_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_2_ir_pin", 0x00010001, 0x14, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_2_ir_enable_gpio_bit", 0x00010001, 0x29, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_2_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_detect_gpio_bit", 0x00010001, 0x2c, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_2_detect_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_27","led_gpio_bit", 0x00010001, 0x28, 0x00, 0x00, 0x00
HKR,"CIRData_27","led_gpio_on_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_27","EnableTx2GPIOValue", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_27","SenseTx2GPIOValue", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_27","transmit_data_polarity", 0x00010001, 0x01, 0x00, 0x00, 0x00
;;;Kingston2 - set GPIOs (no external IR mux)
HKR,"CIRData_28","i2c_gpio_expander_address", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_28","narrow_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
HKR,"CIRData_28","wide_band_receive_ir_pin", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_28","priority_receive_ir_enable_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_28","priority_receive_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_28","total_number_of_transmitters", 0x00010001, 0x02, 0x00, 0x00, 0x00
HKR,"CIRData_28","transmit_1_ir_pin", 0x00010001, 0x41, 0x00, 0x00, 0x00
HKR,"CIRData_28","transmit_1_ir_enable_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_28","transmit_1_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_28","transmit_2_ir_pin", 0x00010001, 0x42, 0x00, 0x00, 0x00
HKR,"CIRData_28","transmit_2_ir_enable_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_28","transmit_2_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_28","transmit_detect_gpio_bit", 0x00010001, 0x0b, 0x00, 0x00, 0x00
HKR,"CIRData_28","transmit_2_detect_gpio_bit", 0x00010001, 0x0a, 0x00, 0x00, 0x00
HKR,"CIRData_28","led_gpio_bit", 0x00010001, 0x0f, 0x00, 0x00, 0x00
HKR,"CIRData_28","led_gpio_on_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_28","EnableTx2GPIOValue", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_28","SenseTx2GPIOValue", 0x00010001, 0xff, 0x00, 0x00, 0x00
;;;Medford2Lite - set GPIOs (host based)
HKR,"CIRData_29","i2c_gpio_expander_address", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_29","narrow_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
HKR,"CIRData_29","wide_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
HKR,"CIRData_29","priority_receive_ir_enable_gpio_bit", 0x00010001, 0x2b, 0x00, 0x00, 0x00
HKR,"CIRData_29","priority_receive_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_29","total_number_of_transmitters", 0x00010001, 0x02, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_1_ir_pin", 0x00010001, 0x14, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_1_ir_enable_gpio_bit", 0x00010001, 0x29, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_1_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_2_ir_pin", 0x00010001, 0x14, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_2_ir_enable_gpio_bit", 0x00010001, 0x29, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_2_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_detect_gpio_bit", 0x00010001, 0x2c, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_2_detect_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_29","led_gpio_bit", 0x00010001, 0x28, 0x00, 0x00, 0x00
HKR,"CIRData_29","led_gpio_on_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_29","EnableTx2GPIOValue", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_29","SenseTx2GPIOValue", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_29","transmit_data_polarity", 0x00010001, 0x01, 0x00, 0x00, 0x00
;;;Medford2Hyb - set GPIOs (host based)
HKR,"CIRData_30","i2c_gpio_expander_address", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_30","narrow_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
HKR,"CIRData_30","wide_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
HKR,"CIRData_30","priority_receive_ir_enable_gpio_bit", 0x00010001, 0x2b, 0x00, 0x00, 0x00
HKR,"CIRData_30","priority_receive_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_30","total_number_of_transmitters", 0x00010001, 0x02, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_1_ir_pin", 0x00010001, 0x14, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_1_ir_enable_gpio_bit", 0x00010001, 0x29, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_1_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_2_ir_pin", 0x00010001, 0x14, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_2_ir_enable_gpio_bit", 0x00010001, 0x29, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_2_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_detect_gpio_bit", 0x00010001, 0x2c, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_2_detect_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_30","led_gpio_bit", 0x00010001, 0x28, 0x00, 0x00, 0x00
HKR,"CIRData_30","led_gpio_on_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_30","EnableTx2GPIOValue", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_30","SenseTx2GPIOValue", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_30","transmit_data_polarity", 0x00010001, 0x01, 0x00, 0x00, 0x00
;;;Chesterfield3 - set GPIOs (no external IR mux)
HKR,"CIRData_31","i2c_gpio_expander_address", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_31","narrow_band_receive_ir_pin", 0x00010001, 0x13, 0x00, 0x00, 0x00
HKR,"CIRData_31","wide_band_receive_ir_pin", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_31","priority_receive_ir_enable_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_31","priority_receive_ir_enable_gpio_bit_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_31","total_number_of_transmitters", 0x00010001, 0x02, 0x00, 0x00, 0x00
HKR,"CIRData_31","transmit_1_ir_pin", 0x00010001, 0x41, 0x00, 0x00, 0x00
HKR,"CIRData_31","transmit_1_ir_enable_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_31","transmit_1_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_31","transmit_2_ir_pin", 0x00010001, 0x42, 0x00, 0x00, 0x00
HKR,"CIRData_31","transmit_2_ir_enable_gpio_bit", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_31","transmit_2_ir_enable_gpio_bit_value", 0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"CIRData_31","transmit_detect_gpio_bit", 0x00010001, 0x0b, 0x00, 0x00, 0x00
HKR,"CIRData_31","transmit_2_detect_gpio_bit", 0x00010001, 0x0a, 0x00, 0x00, 0x00
HKR,"CIRData_31","led_gpio_bit", 0x00010001, 0x0f, 0x00, 0x00, 0x00
HKR,"CIRData_31","led_gpio_on_value", 0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"CIRData_31","EnableTx2GPIOValue", 0x00010001, 0xff, 0x00, 0x00, 0x00
HKR,"CIRData_31","SenseTx2GPIOValue", 0x00010001, 0xff, 0x00, 0x00, 0x00
[Drivers_Dir]
hcw85cir3.sys,hcw85cir.sys
;-------------- Service installation
[hcw85cir_DeviceXP.NT.Services]
AddService = hcw85cir,%SPSVCINST_ASSOCSERVICE%, hcw85cir_Service_Inst
[hcw85cir_Device.NT.Services]
AddService = hcw85cir,%SPSVCINST_ASSOCSERVICE%, hcw85cir_Service_Inst
; -------------- hcw85cir driver install sections
[hcw85cir_Service_Inst]
DisplayName = %HCW85CIR.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\system32\drivers\hcw85cir3.sys
LoadOrderGroup = Extended Base
AddReg = hcw85cir_Device.NT.AddReg.Services
[hcw85cir_Device.NT.AddReg.Services]
; Active power Key (set to NOCLOBBER)
HKR,"PowerKey","PowerKey",0x00000003,\
0x2b, 0x2b, 0x80, 0x0f, 0x00, 0x03, 0x0c, \
0x04, 0x80, 0x0c, 0x00, 0x00, 0xff, 0x00, \
0x00, 0x00, 0x00
; RC6 power key
HKR,"PowerKey","PowerKeyRC6",0x00000001,\
0x2b, 0x2b, 0x80, 0x0f, 0x00, 0x03, 0x0c, \
0x04, 0x80, 0x0c, 0x00, 0x00, 0xff, 0x00, \
0x00, 0x00, 0x00
; RC5 power key
HKR,"PowerKey","PowerKeyRC5",0x00000001,\
0x2b, 0x58, 0x00, 0x00, 0x00, 0x02, 0xf0, \
0x0c, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00
; NEC power key
HKR,"PowerKey","PowerKeyNEC",0x00000001,\
0x29, 0x37, 0x45, 0xba, 0x12, 0x80, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00
;
;--- hcw85cir_Device Coinstaller installation ------
;
[hcw85cir_DeviceXP.NT.CoInstallers]
AddReg=IR_CoInstallerXP_AddReg
CopyFiles=IR_CoInstallerXP_CopyFiles
[hcw85cir_Device.NT.CoInstallers]
AddReg=IR_CoInstaller_AddReg
CopyFiles=IR_CoInstaller_CopyFiles
[IR_CoInstallerXP_AddReg]
HKR,,CoInstallers32,0x00010000,"hcw85wdf_01005.dll,WdfCoInstaller"
[IR_CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000,"hcw85wdf_01005.dll,WdfCoInstaller","hcw85cir.dll,IRCoInstaller"
[IR_CoInstallerXP_CopyFiles]
hcw85wdf_01005.dll ;from WinDDK\6000\Redist\Wdf (renamed)
[IR_CoInstaller_CopyFiles]
hcw85cir.dll ;USB Consumer IR Driver coinstaller for eHome (renamed)
hcw85wdf_01005.dll ;from WinDDK\6000\Redist\Wdf (renamed)
[hcw85cir_DeviceXP.NT.WdfSection]
USE_WDF_DYNAMIC
COMPONENTS = WdfDynam
[hcw85cir_Device.NT.WdfSection]
USE_WDF_DYNAMIC
COMPONENTS = WdfDynam
[hcw85cir_DeviceXP.NT.Wdf]
KmdfService = hcw85cir, hcw85cirwdf_wdfsect
[hcw85cir_Device.NT.Wdf]
KmdfService = hcw85cir, hcw85cirwdf_wdfsect
[hcw85cirwdf_wdfsect]
KmdfLibraryVersion = 1.5
[Strings]
SPSVCINST_ASSOCSERVICE= 0x00000002
HCW85CIR.DeviceDesc = "Hauppauge Consumer Infrared Receiver"
HCW85CIR.SVCDESC = "Hauppauge Consumer IR 3"
p2.InstallDisk = "Hauppauge CX23885 Drivers Install Disk"
p2.InstallDisk64 = "Hauppauge CX23885 Drivers Install Disk (64Bit Components)"
p2.InstallDiskWOW = "Hauppauge CX23885 Drivers Install Disk (WOW64 Components)"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.