;===============================================================================
; AST1000/2000 Win2K/XP/S03 Display Driver Release Notes
;===============================================================================
V.0.50.00 by ycchen@10122005
1. The first release to Quanta for A0
---------------------------------------------------------------------------------
V.0.51.00 by ycchen@10127005
001.[New] Modify for Performance tuning,
002.[New] Modify for DRAM information stuff
003.[New] Support Virtual EDID
004.[New] Set Burst CMD as default
005.[New] Support Multi-Adapter
---------------------------------------------------------------------------------
V.0.52.00 by ycchen@1104005
001.[New] Add Cursor Info into the sifgnature structure, ycchen@110305
002.[New] Change Device ID to 0x1A03
---------------------------------------------------------------------------------
V.0.53.00 by ycchen@1123005
001.[Bug] Fixed W2K 256c mode garbage issue
002.[Bug] Fixed Cursor shape chould be corrupted in some case
002.[Bug] Fixed DCT53/StretchBlt Test failed issue in 1600x1200 modes
003.[Bug] Fixed different cursor pattern checksum is equal issue
004.[New] Filter support modes by bandwidth
---------------------------------------------------------------------------------
V.0.60.00 by ycchen@121705, first release both for A0/A1
001.[New] Modify for A1
002.[New] Modify for INF to meet WHQL request
003.[New] Add scratch for video engine enable/disable
004.[Bug] Get MCLK incorrect
005.[Bug] Run DCT cause system page fault if AST is as secondary
---------------------------------------------------------------------------------
V.0.61.00 by ycchen@011106,
001.[Bug] Check Bandwidth Error Issue, ycchen@122705
002.[Bug] Product Info incorrect, ycchen@122705
003.[Patch] for CRT threshold, request by HJ huang@122705
004.[New] Support 16/32 DRAM Width, ycchen@010606
---------------------------------------------------------------------------------
V.0.62.00 by ycchen@012706,
001.[Bug] Fixed Hibernate scroll bar can't display properly
---------------------------------------------------------------------------------
V.0.80.00 by ycchen@031306,
001.Version change only
---------------------------------------------------------------------------------
V.0.81.00 by ycchen@042806,
001.[Bug] Fixed DMW/Screen Pixel Resolution Line Display Abnormal if resolution >= 1280x1024, ycchen@041006
002.[Bug] Fixed 320x240x60Hz & 1600x1200x60Hz display abnormal if we are Secondary, ycchen@041306
003.[New] Set MCLK166 as default by ycchen@042706
V.0.81.02 by ycchen@052606,
001.[Bug] Fixed Display information incorrect
---------------------------------------------------------------------------------
V.0.82.00 by ycchen@061406,
001.[New] Upgrade to WDK Beta2 (Build 5384) for Vista
002.[Bug] Fixed Vista Beta2 display color abnormal while login by ycchen@061406
---------------------------------------------------------------------------------
v.0.83.00: ycchen@120406
001.[New] Support AST2100 FPGA EVB Board
V.0.83.01 by ycchen@011207
001.[New] Modify for AST2100 H/W IP Changed, ycchen@011207
002.[Bug] Fix write pointer incorrect if 2D reset no effect, ycchen@011207
003.[New] Modify for AST2100 DRAM setting, ycchen@011407
v.0.83.03: ycchen@021607
001.[Bug] Fix AST2100 VGA & Video Threshold Issue, ycchen@021607
v.0.83.04: ycchen@051507
001.[New] Upgrade to WDK 6000 (RTM)
---------------------------------------------------------------------------------
v.0.84.00: ycchen@060507
001.[Patch] Patch for 2D hanged in AST2100 A0, ycchen@060407
002.[New] Support AST2100 A0, ycchen@060407
003.[New] Add 1920x1200x60Hz for AST2100, ycchen@060407
v.0.84.01: ycchen@060807
001.Remove Patch in 0.84.00 for AST2100 A0
002.[New] use 512Mb DRAM type as feault in AST2100 EVB
v.0.84.02: ycchen@061207
001.[Bug] Fixed DCT power manegement hanged issue, ycchen@061207
002.[New] Modify DRAM timing for H/W request
003.[Bug] fixed 1920x1200x60Hz can't display issue
004.[New] Modify Check BW formula for AST2100
v.0.84.03: ycchen@062107
001.[New] Modify DRAM Timing to 266MHz
v.0.84.04: ycchen@070907
001.[New] Modify DRAM Timing for H/W request
002.[Bug] Modify for DTM/chkinf error
v.0.84.05: ycchen@072607
001.[New] Disable ReadCache for AST2100 by H/W request
002.[New] Set Video Buffer Trapping to SDC
v.0.84.06: ycchen@082107
001.[Bug] Modify driver version number to pass the DTM test
v.0.84.07: ycchen@100407
001.[Bug] Fixed SUN bug #6580654 : With mezzanine plugged in, DTM tests cause AST graphics driver to fail
---------------------------------------------------------------------------------
v.0.85.00: ycchen@110107
001.[New] Use 256K CMDQ as deault to avoid Bugcheck 0xEA issue in some platoform, ycchen@110107
002.[New] Enable Read Cache for AST2100 A1
003.[New] Set Scratch after DRAM Initial
004.[New] Modify 1920x1200x60 to reduced blank mode
v.0.85.01: ycchen@112807
001.[Bug] Fixed Server 2008 can't install issue
002.[New] Remove 1920x1200 for AST1100
003.[New] Modify Display banner for AST1100/2050/2100
v.0.85.02: ycchen@121207
001.[Bug] Fix run DCT53 on Windows 2003 cause system un-stable issue
002.[New] Modify Display banner for AST1100/2000/2050/2100
v.0.85.03: ycchen@010308
001.[Bug] Fixed Server 2008 can't install issue
v.0.85.04: ycchen@011808
001.[Bug] Fixed WLK 1.1 CHKINF failed issue on Server 2008
---------------------------------------------------------------------------------
v.0.86.00: ycchen@012208
001.[New] Support VGA1 + VGA2 Mirror Display, ycchen@012208
002.[Bug] Fixed 2nd adapter can't resume on Server 2008, ycchen@021308
v.0.86.03: ycchen@003038
001.[Bug] Fix Philips 107E parsing incorrect, ycchen@030308
v.0.86.04: ycchen@032108
001.[New] Modify DRAM utilitization for AST1100/2100 16bits DRAM
002.[Bug] Fixed DTM/system test failed issue on Server 2008
v.0.86.05: ycchen@040308
001.[Bug] Fixed run SE cause display abnormal in Server 2008, ycchen@040308
002.[Bug] Fixed DTM system test gmvideo6b failed issue on Server 2008
v.0.86.06: ycchen@040908
001.[Bug] Fixed Mitac Hot-plug issue, ycchen@040908
v.0.86.07: ycchen@041708
001.[Bug] Fixed S93 Common Scenario Stress Failed Issue, ycchen@041708
v.0.86.08: ycchen@041908
001.[Bug] Fixed DTM Failed Issues on Server 2003, ycchen@042908
v.0.86.09: ycchen@050608
001.[New] INF update only
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.