Install.INI Driver File Contents (VCD001542-00_XP_2183.exe)

[General]
TopText=The Operating System you have installed is not supported on this CD. ////Please go to http://www.micronpc.com/support to see if drivers for your operating system are available.  
SideText=Note: ////MicronPC ONLY provides support for the factory installed operating system.

HideAll=1
Wait=YES

[4.10]
;***Windows 98***
HideAll=1
Wait=YES
Theme=Purple

TopText=All drivers are pre-installed on your computer when it leaves the MicronPC factory.  You do not need to re-install them unless you re-load your operating system or are experiencing technical difficulties. You must exit all other programs before installing these drivers.
SideText=Select the items at the left that you want to intall.//Only the devices that are detected in your system should appear.////The installation may take several minutes to complete.  //Do not disturb the system during this time!

[4.0]
***Windows NT 4.0***
TopText=All drivers are pre-installed on your computer when it leaves the MicronPC factory.  You do not need to re-install them unless you re-load your operating system or are experiencing technical difficulties. You must exit all other programs before installing these drivers.
SideText=The driver installation for your device must be done using the Operating System Display Properties applet.  ////Please refer to the Installation documentation by clicking on the HELP button.  ////The installation documentation is in HTML format and supports both frame and no-frame browsers. 

Helptext=Documentation
Helpfile=readme.htm
Theme=Purple

[5.0]
;***Windows 2000***
HideAll=1
Wait=YES
Theme=Purple

TopText=All drivers are pre-installed on your computer when it leaves the MicronPC factory.  You do not need to re-install them unless you re-load your operating system or are experiencing technical difficulties. You must exit all other programs before installing these drivers.
SideText=Select the items at the left that you want to intall.//Only the devices that are detected in your system should appear.////The installation may take several minutes to complete.  //Do not disturb the system during this time!

[5.1]
;***Windows XP***
TopText=All drivers are pre-installed on your computer when it leaves the MicronPC factory.  You do not need to re-install them unless you re-load your operating system or are experiencing technical difficulties. You must exit all other programs before installing these drivers.
SideText=Select the items at the left that you want to intall.//Only the devices that are detected in your system should appear.////The installation may take several minutes to complete.  //Do not disturb the system during this time!

Wait=YES
Theme=Purple

;--VCD001542-00
Driver1=VisionTek 32MB MX200 
Icon1=1
Detect1=PCI\VEN_10DE&DEV_0111&SUBSYS_00281545
command1=DevNode /U "PCI\VEN_10DE&DEV_0111&SUBSYS_00281545" #:\MicronPC\Video\NVMU.inf
SetupFolder1=.\
Reboot1=YES
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.38