1. dge560T_autorunCD_110.zip Driver
2. netm4cx.inf File Contents

netm4cx.inf Driver File Contents (dge560T_autorunCD_110.zip)

ÿþ; netm4cx.inf created 22-Jun-2006

;

; D-Link DGE-5xx Gigabit Ethernet Adapter 

;

; (C)Copyright 2002-2006 Marvell(R).

; 

; All rights reserved.

;

; INF File for NDIS5.1 Miniport Driver for Windows XP and Server 2003 (X64) M4CXA64.sys v8.39.10.3



[Version]

Signature	= "$Windows NT$"

Class		= Net

ClassGUID	= {4D36E972-E325-11CE-BFC1-08002BE10318}

Provider	= %D-Link%

CatalogFile	= m4cxa64.CAT

DriverVer=06/22/2006, 8.39.10.3



[Manufacturer]



%D-Link%	= D-Link, NTamd64







[ControlFlags]



ExcludeFromSelect	= *



;-----------------------------------------------------------------------------

;

;       Windows Server 2003

;

;-----------------------------------------------------------------------------

[D-Link.NTamd64]

%Dlink.DeviceDesc4360%	= SLYuk2CopGig.ndi, PCI\VEN_1186&DEV_4B00&SUBSYS_4B001186

%Dlink.DeviceDesc4320%	= SLYukCopGig.ndi, PCI\VEN_1186&DEV_4C00&SUBSYS_4C001186

%Dlink.DeviceDesc4320%	= SLYukCopGig.ndi, PCI\VEN_1186&DEV_4B01&SUBSYS_4B011186

%Dlink.DeviceDesc4346%	= SLYuk2FibGig.ndi, PCI\VEN_1186&DEV_4B02&SUBSYS_4B021186

%Dlink.DeviceDesc550SX%	= SLYuk2FibGig.ndi, PCI\VEN_1186&DEV_4001&SUBSYS_40011186







;-------------------------------------------------------------------------------

; Gigabit Ethernet Adapters <single link Version 2.0 Copper>



[SLYukCopGig.ndi]

DelReg= m4cxa64.delreg

AddReg		= m4cxa64.reg, m4cxa64.params, m4cxa64.SingleLink.params, m4cxa64.SLSpeedDuplex.params.DLK , m4cxa64.TxRxBuff.params, m4cxa64.WoL.params, m4cxa64.GigFrSize.params

Characteristics	= 0x84

BusType		= 5

CopyFiles	= m4cxa64.CopyFiles



[SLYukCopGig.ndi.Services]

AddService	= m4cxa64, 2, m4cxa64.Service, common.EventLog

;-------------------------------------------------------------------------------

; Gigabit Ethernet Adapters <single link Copper>



[SLYuk2CopGig.ndi]

DelReg= m4cxa64.delreg

AddReg		= m4cxa64.reg, m4cxa64.params, m4cxa64.SingleLink.params, m4cxa64.SLSpeedDuplex.params, m4cxa64.TxRxLE.params, m4cxa64.WoL.params, m4cxa64.GigFrSize.params, m4cxa64.TcpSegm.params

Characteristics	= 0x84

BusType		= 5

CopyFiles	= m4cxa64.CopyFiles



[SLYuk2CopGig.ndi.Services]

AddService	= m4cxa64, 2, m4cxa64.Service, common.EventLog



;-------------------------------------------------------------------------------

; Gigabit Ethernet Adapters <single link Fiber>



[SLYuk2FibGig.ndi]

DelReg= m4cxa64.delreg

AddReg		= m4cxa64.reg, m4cxa64.params, m4cxa64.SingleLink.params, m4cxa64.TxRxLE.params, m4cxa64.GigFrSize.params, m4cxa64.TcpSegm.params

Characteristics	= 0x84

BusType		= 5

CopyFiles	= m4cxa64.CopyFiles



[SLYuk2FibGig.ndi.Services]

DelService = ___DELMRVLSERVICENAME__, 204

DelService = ___DELSKSERVICENAME__, 204

AddService	= m4cxa64, 2, m4cxa64.Service, common.EventLog





;-----------------------------------------------------------------------------

;

; General Driver Parameters

;

;-----------------------------------------------------------------------------

[m4cxa64.params]



HKR, Ndi\Params\HwChecksum,		ParamDesc,	0, %HwCsum%

HKR, Ndi\Params\HwChecksum,		Type,		0, "enum"

HKR, Ndi\Params\HwChecksum\enum,	"1",			0, %On%

HKR, Ndi\Params\HwChecksum\enum,	"0",			0, %Off%

HKR, Ndi\Params\HwChecksum,		Default,		0, "1"



HKR, Ndi\Params\MessageLog,		ParamDesc,	0, %LogMsg%

HKR, Ndi\Params\MessageLog,		Type,		0, "enum"

HKR, Ndi\Params\MessageLog\enum,	"4",			0, %Non%

HKR, Ndi\Params\MessageLog\enum,	"3",			0, %Err%

HKR, Ndi\Params\MessageLog\enum,	"2",			0, %Wrn%

HKR, Ndi\Params\MessageLog\enum,	"1",			0, %Sta%

HKR, Ndi\Params\MessageLog\enum,	"0",			0, %All%

HKR, Ndi\Params\MessageLog,		Default,		0, "1"



HKR, Ndi\Params\NetworkAddress,	ParamDesc,	0, %NetAddress%

HKR, Ndi\Params\NetworkAddress,	Type,		0, "edit"

HKR, Ndi\Params\NetworkAddress,	LimitText,	0, "18"

HKR, Ndi\Params\NetworkAddress,	UpperCase,	0, "1"

HKR, Ndi\Params\NetworkAddress,	Default,		0, ""

HKR, Ndi\Params\NetworkAddress,	Optional,		0, "1"



HKR, Ndi\Params\Moderate,		ParamDesc,	0, %IntMod%

HKR, Ndi\Params\Moderate,		Type,		0, "enum"

HKR, Ndi\Params\Moderate\enum,	"1",			0, %On%

HKR, Ndi\Params\Moderate\enum,	"0",			0, %Off%

HKR, Ndi\Params\Moderate,		Default,		0, "1"



HKR, Ndi\Params\FixedIntMod,	ParamDesc,	0, %MaxIrq%

HKR, Ndi\Params\FixedIntMod,	Type,		0, "int"

HKR, Ndi\Params\FixedIntMod,	Base,		0, "10"

HKR, Ndi\Params\FixedIntMod,	Min,			0, "1000"

HKR, Ndi\Params\FixedIntMod,	Max,			0, "30000"

HKR, Ndi\Params\FixedIntMod,	Step,		0, "1"

HKR, Ndi\Params\FixedIntMod,	Default,		0, "5000"





;-----------------------------------------------------------------------------

;

; Additional driver parameters for TX/RX buffers (V1 and V2)

;

;-----------------------------------------------------------------------------

[m4cxa64.TxRxBuff.params]







HKR, Ndi\Params\MaxReceives,	ParamDesc,	0, %NumRcv%

HKR, Ndi\Params\MaxReceives,	Type,		0, "int"

HKR, Ndi\Params\MaxReceives,	Base,		0, "10"

HKR, Ndi\Params\MaxReceives,	Min,			0, "3"

HKR, Ndi\Params\MaxReceives,	Max,			0, "500"

HKR, Ndi\Params\MaxReceives,	Step,		0, "1"

HKR, Ndi\Params\MaxReceives,	Default,		0, "50"



HKR, Ndi\Params\MaxTransmits,	ParamDesc,	0, %NumTx%

HKR, Ndi\Params\MaxTransmits,	Type,		0, "int"

HKR, Ndi\Params\MaxTransmits,	Base,		0, "10"

HKR, Ndi\Params\MaxTransmits,	Min,			0, "4"

HKR, Ndi\Params\MaxTransmits,	Max,			0, "200"

HKR, Ndi\Params\MaxTransmits,	Step,		0, "1"

HKR, Ndi\Params\MaxTransmits,	Default,		0, "50"



;-----------------------------------------------------------------------------

;

; Additional driver parameters for TX/RX LE (Y2)

;

;-----------------------------------------------------------------------------

[m4cxa64.TxRxLE.params]





HKR, Ndi\Params\MaxReceives,	ParamDesc,	0, %NumRcv%

HKR, Ndi\Params\MaxReceives,	Type,		0, "int"

HKR, Ndi\Params\MaxReceives,	Base,		0, "10"

HKR, Ndi\Params\MaxReceives,	Min,			0, "256"

HKR, Ndi\Params\MaxReceives,	Max,			0, "512"

HKR, Ndi\Params\MaxReceives,	Step,		0, "128"

HKR, Ndi\Params\MaxReceives,	Default,		0, "256"



HKR, Ndi\Params\MaxTransmits,	ParamDesc,	0, %NumTx%

HKR, Ndi\Params\MaxTransmits,	Type,		0, "int"

HKR, Ndi\Params\MaxTransmits,	Base,		0, "10"

HKR, Ndi\Params\MaxTransmits,	Min,			0, "256"

HKR, Ndi\Params\MaxTransmits,	Max,			0, "512"

HKR, Ndi\Params\MaxTransmits,	Step,		0, "128"

HKR, Ndi\Params\MaxTransmits,	Default,		0, "256"



;-----------------------------------------------------------------------------

;

; Additional driver parameters for Maximum Frame Size (10/100/1000 chip)

;

;-----------------------------------------------------------------------------

[m4cxa64.GigFrSize.params]





HKR, Ndi\Params\MaxFrameSize,           ParamDesc,      0, %MaxFrSize%

HKR, Ndi\Params\MaxFrameSize,           default,        0, "1514"

HKR, Ndi\Params\MaxFrameSize\Enum,      "1514",         0, %Disabled%

HKR, Ndi\Params\MaxFrameSize\Enum,      "4088",         0, %Bytes4088%

HKR, Ndi\Params\MaxFrameSize\Enum,      "9014",         0, %Bytes9014%

HKR, Ndi\Params\MaxFrameSize,           type,           0, "enum"



;-----------------------------------------------------------------------------

;

; Additional Driver Parameters for WakeOnLan

;

;-----------------------------------------------------------------------------

[m4cxa64.WoL.params]





HKR, Ndi\Params\WakeUpModeCap_A,		ParamDesc,	0, %WakeUpCaps%

HKR, Ndi\Params\WakeUpModeCap_A,		Type,		0, "enum"

HKR, Ndi\Params\WakeUpModeCap_A\enum,	"0",		0, %Non%

HKR, Ndi\Params\WakeUpModeCap_A\enum,	"25",		0, %Magic Packet%

HKR, Ndi\Params\WakeUpModeCap_A\enum,	"26",		0, %Pattern Match%

HKR, Ndi\Params\WakeUpModeCap_A\enum,	"27",		0, %Mag Pack Patt Match%

HKR, Ndi\Params\WakeUpModeCap_A\enum,	"28",		0, %Link Change%

HKR, Ndi\Params\WakeUpModeCap_A,		Default,	0, "27"



HKR, Ndi\Params\WakeFromShutdown,		ParamDesc,	0, %WakeFromShut%

HKR, Ndi\Params\WakeFromShutdown,		Type,		0, "enum"

HKR, Ndi\Params\WakeFromShutdown\enum,	"1",		0, %On%

HKR, Ndi\Params\WakeFromShutdown\enum,	"0",		0, %Off%

HKR, Ndi\Params\WakeFromShutdown,		Default,	0, "0"



;-----------------------------------------------------------------------------

;

; Additional driver parameters for TCP segmentation

;

;-----------------------------------------------------------------------------

[m4cxa64.TcpSegm.params]



HKR, Ndi\Params\TcpLargeSend,		ParamDesc,	0, %TcpSegmentation%

HKR, Ndi\Params\TcpLargeSend,		Type,		0, "enum"

HKR, Ndi\Params\TcpLargeSend\enum,	"1",		0, %Enabled%

HKR, Ndi\Params\TcpLargeSend\enum,	"0",		0, %Disabled%

HKR, Ndi\Params\TcpLargeSend,		Default,	0, "1"



;-----------------------------------------------------------------------------

;

; Additional Driver Parameters for Single Link Adapters

;

;-----------------------------------------------------------------------------

[m4cxa64.SingleLink.params]



HKR, Ndi\Params\TagHeaderSupport_A,			ParamDesc,	0, %QoSSup%

HKR, Ndi\Params\TagHeaderSupport_A,			Type,		0, "enum"

HKR, Ndi\Params\TagHeaderSupport_A\enum,	"1",		0, %On%

HKR, Ndi\Params\TagHeaderSupport_A\enum,	"0",		0, %Off%

HKR, Ndi\Params\TagHeaderSupport_A,			Default,	0, "0"



HKR, Ndi\Params\FlowControl_A,		ParamDesc,	0, %FlowCtrl%

HKR, Ndi\Params\FlowControl_A,		Type,		0, "enum"

HKR, Ndi\Params\FlowControl_A\enum,	"3",		0, %On%

HKR, Ndi\Params\FlowControl_A\enum,	"0",		0, %Off%

HKR, Ndi\Params\FlowControl_A,		Default,	0, "3"







HKR,, MaxMulticast,,         "128"

HKR,, WaitForRxResources,,   "1"

HKR,, SGMapRegistersNeeded,, "64"



;-----------------------------------------------------------------------------

;

; Additional driver parameter to set the port speed and capabilities

;

;-----------------------------------------------------------------------------

[m4cxa64.SLSpeedDuplex.params]





HKR,Ndi\Params\ConnectionType_A,      ParamDesc,  0, %SpeedDuplex%

HKR,Ndi\Params\ConnectionType_A,      Type,       0, "enum"

HKR,Ndi\Params\ConnectionType_A,      Default,    0, "0"

HKR,Ndi\Params\ConnectionType_A\enum, "0",        0, %Autosense%

HKR,Ndi\Params\ConnectionType_A\enum, "1",        0, %10MHD%

HKR,Ndi\Params\ConnectionType_A\enum, "2",        0, %10MFD%

HKR,Ndi\Params\ConnectionType_A\enum, "3",        0, %100MHD%

HKR,Ndi\Params\ConnectionType_A\enum, "4",        0, %100MFD%



;-----------------------------------------------------------------------------

;

; Additional driver parameter to set the port speed and capabilities

;

;-----------------------------------------------------------------------------

[m4cxa64.SLSpeedDuplex.params.DLK]





HKR,Ndi\Params\ConnectionType_A,      ParamDesc,  0, %SpeedDuplex%

HKR,Ndi\Params\ConnectionType_A,      Type,       0, "enum"

HKR,Ndi\Params\ConnectionType_A,      Default,    0, "0"

HKR,Ndi\Params\ConnectionType_A\enum, "0",        0, %Autosense%

HKR,Ndi\Params\ConnectionType_A\enum, "1",        0, %10MHD%

HKR,Ndi\Params\ConnectionType_A\enum, "2",        0, %10MFD%

HKR,Ndi\Params\ConnectionType_A\enum, "3",        0, %100MHD%

HKR,Ndi\Params\ConnectionType_A\enum, "4",        0, %100MFD%

HKR,Ndi\Params\ConnectionType_A\enum, "5",        0, %1000MFD%



;-----------------------------------------------------------------------------

;

; General Registry Entries

;

;-----------------------------------------------------------------------------

[m4cxa64.reg]



HKR, Ndi\Interfaces, UpperRange,, "ndis5"



HKR, Ndi\Interfaces, LowerRange,, "ethernet"

HKR, Ndi, Service,, "m4cxa64"





;-----------------------------------------------------------------------------

;

; This section contain the keys which will be deleted. These are old keys 

; which are not any more supported in newest INF.

;

;-----------------------------------------------------------------------------

[m4cxa64.delreg]

; remove the "OS Controlled" (15) subkey from WakeUpModeCap_X

HKR, Ndi\Params\WakeUpModeCap_A\enum,15

HKR, Ndi\Params\WakeUpModeCap_B\enum,15

HKR, Ndi\Params\DuplexCapabilities_A

HKR, Ndi\Params\DuplexCapabilities_B

HKR, Ndi\Params\FlowControl_A

HKR, Ndi\Params\FlowControl_B

HKR, Ndi\Params\AutoNegotiation_A

HKR, Ndi\Params\AutoNegotiation_B

HKR, Ndi\Params\Role_A

HKR, Ndi\Params\Role_B

HKR, Ndi\Params\Speed_A

HKR, Ndi\Params\Speed_B

HKR, Ndi\Params\MaxFrameSize





;-----------------------------------------------------------------------------

;

; Service

;

;-----------------------------------------------------------------------------

[m4cxa64.Service]

DisplayName	= %m4cxa64.DriverDesc%

ServiceType	= 1

StartType = 3

ErrorControl = 1

ServiceBinary  = %12%\m4cxa64.sys

LoadOrderGroup = NDIS





;-----------------------------------------------------------------------------

;

;

;

;-----------------------------------------------------------------------------

[common.EventLog]

AddReg = common.AddEventLog.reg



;-----------------------------------------------------------------------------

;

;

;

;-----------------------------------------------------------------------------

[common.AddEventLog.reg]

HKR,, EventMessageFile,	0x00020000, "%%SystemRoot%%\System32\Drivers\m4cxa64.sys"

HKR,, TypesSupported,	0x00010001, 7





;-----------------------------------------------------------------------------

;

; Source Files

;

;-----------------------------------------------------------------------------

[SourceDisksNames]

1 = %DriverDisk%,,,



[SourceDisksFiles]

m4cxa64.sys	= 1,,



[m4cxa64.CopyFiles]

m4cxa64.sys,,,2





;-----------------------------------------------------------------------------

;

; Destination Directories

;

;-----------------------------------------------------------------------------

[DestinationDirs]



DefaultDestDir = 12

m4cxa64.CopyFiles	= 12



;-----------------------------------------------------------------------------

;

; Localizable Strings

;

;-----------------------------------------------------------------------------

[Strings]

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "Network Address"

HwCsum = "Hardware Checksumming"

WakeUpCaps   = "Wake Up Capabilities"

IntMod = "Interrupt Moderation"

MaxIrq = "Max IRQ per Sec"

LogMsg = "Log Status Messages"

NumRcv = "Number of Receive Buffers"

NumTx  = "Number of Transmit Buffers"

RLMT  = "RLMT Mode"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "Preferred Port"

On = "On"

Off = "Off"

Enabled = "Enabled"

Disabled = "Disabled"

Non = "None"

Err = "Errors"

Wrn = "Warnings"

Sta = "Status Messages"

All = "All Messages"

A = "A"

B = "B"

Autosense = "Auto-Sense"

10MHD = "10Mbps Half Duplex"

10MFD = "10Mbps Full Duplex"

100MHD = "100Mbps Half Duplex"

100MFD = "100Mbps Full Duplex"

1000MFD = "1000Mbps Full Duplex"

Magic Packet = "Magic Packet"

Pattern Match = "Pattern Match"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Link Change"

SpeedDuplex = "Speed & Duplex"

SpeedDuplexA = "Speed & Duplex Port A"

SpeedDuplexB = "Speed & Duplex Port B"

FlowCtrl = "FlowControl"

FlowCtrlA = "FlowControl Port A"

FlowCtrlB = "FlowControl Port B"

QoSSup = "802.1p Support"

QoSSupA = "802.1p Support Port A"

QoSSupB = "802.1p Support Port B"

WakeFromShut = "Wake From Shutdown"

TcpSegmentation = "TCP Segmentation"

BatSpeed = "BatterySpeedSettings"

Fast = "SmartSpeedDown"

Gig = "FullSpeed"

BatLinkDet = "BatteryModeLinkDetection"

NoPwrSave = "NoEnergySaving"

MaxPwrSave = "MaximumEnergySaving"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "Jumbo Frames"

Bytes4088 = "4088 Bytes"

Bytes9014 = "9014 Bytes"

;-----------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk Installation Disk"



Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





;-----------------------------------------------------------------------------



; Chinese (Taiwan)

[Strings.0404]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "²}ïMO@W"

HwCsum = "lxÔš¢jåg=~ŒT"

WakeUpCaps   = "šU’‘ŸRý€"

IntMod = "-N·e!j_"

MaxIrq = "g'Y IRQxeϑ"

LogMsg = "åeŒŠÀrKa
Šo`"

NumRcv = "¥c6eé}]ˆ@SxeÏ‘"

NumTx  = "³P8é}]ˆ@SxeÏ‘"

RLMT  = "RLMT !j_"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "OP}YàW"

On = "‹•_U"

Off = "Ü•‰•"

Enabled = "_U(u"

Disabled = "y(u"

Non = "!q"

Err = "/“¤Š"

Wrn = "f‹JT"

Sta = "ÀrKa
Šo`"

All = "@b	g
Šo`"

A = "A"

B = "B"

Autosense = "êÕRaÉa"

10MHD = "10Mbps JSÙ–å]"

10MFD = "10Mbps hQÙ–å]"

100MHD = "100Mbps JSÙ–å]"

100MFD = "100Mbps hQÙ–å]"

1000MFD = "1000Mbps hQÙ–å]"

Magic Packet = "Magic PacketšU’‘!j_"

Pattern Match = "Pattern MatchšU’‘!j_"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Link ChangešU’‘!j_"

SpeedDuplex = "¦^ŒTÙ–å]"

SpeedDuplexA = "ïzãSA„v¦^ŒTÙ–å]"

SpeedDuplexB = "ïzãSB„v¦^ŒTÙ–å]"

FlowCtrl = "AmÏ‘§c6R"

FlowCtrlA = "AmÏ‘§c6R àW A"

FlowCtrlB = "AmÏ‘§c6R àW B"

QoSSup = "802.1p /eôc"

QoSSupA = "802.1p /eôc àW A"

QoSSupB = "802.1p /eôc àW B"

WakeFromShut = "ž_Ü•‰•ÀrKaNšU’‘"

TcpSegmentation = "TCPRµk"

BatSpeed = "û–`lÀrKa³P8¦^"

Fast = "zfgaM–À{ý€"

Gig = "hQ"

BatLinkDet = "û–`lÀrKaÈ“¥cuP,n"

NoPwrSave = "!qÀ{ý€"

MaxPwrSave = "g'YÀ{ý€"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "è]'Y
\S"

Bytes4088 = "4088MOCQD}"

Bytes9014 = "9014MOCQD}";; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; Chinese (PRC)

[Strings.0804]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "QÜ~0W@W"

HwCsum = "lxöNÀhågŒT"

WakeUpCaps   = "$U’‘ŸRý€"

IntMod = "-N­e!j_"

MaxIrq = "g'Y IRQpeϑ"

LogMsg = "åe×_¶r
`áOo`"

NumRcv = "¥c6eX[:SpeÏ‘"

NumTx  = " O
X[:SpeÏ‘"

RLMT  = "RLMT !j_"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "–™	ïzãS"

On = "_"

Off = "sQ"

Enabled = "/T(u"

Disabled = "y(u"

Non = "àe"

Err = "•ï‹"

Wrn = "f‹JT"

Sta = "¶r
`áOo`"

All = "@b	gáOo`"

A = "A"

B = "B"

Autosense = "ꁨRa”^"

10MHD = "10Mbps JSÌSå]"

10MFD = "10Mbps hQÌSå]"

100MHD = "100Mbps JSÌSå]"

100MFD = "100Mbps hQÌSå]"

1000MFD = "1000Mbps hQÌSå]"

Magic Packet = "Magic Packet$U’‘!j_"

Pattern Match = "Pattern Match$U’‘!j_"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Link Change$U’‘!j_"

SpeedDuplex = "¦^ŒTÌSå]"

SpeedDuplexA = "ïzãSA„v¦^ŒTÌSå]"

SpeedDuplexB = "ïzãSB„v¦^ŒTÌSå]"

FlowCtrl = "Am§c6R"

FlowCtrlA = "Am§c6RïzãS A"

FlowCtrlB = "Am§c6RïzãS B"

QoSSup = "801.1p /e
c"

QoSSupA = "802.1p /e
cïzãS A"

QoSSupB = "802.1p /e
cïzãS B"

WakeFromShut = "ÎNsQ핶r
`N$U’‘"

TcpSegmentation ="TCPRµk"

BatSpeed = "5u`l¶r
` O“¦^"

Fast = "zfgaM–‚‚ý€"

Gig = "hQ"

BatLinkDet = "5u`l¶r
`þ”¥c¦OKm"

NoPwrSave = "àe‚‚ý€"

MaxPwrSave = "g'Y‚‚ý€"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "'Y'^"

Bytes4088 = "4088 *NW[‚‚"

Bytes9014 = "9014 *NW[‚‚"

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; German (Standard)

[Strings.0407]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "Netzwerkadresse"

HwCsum = "HW-Prüfsummenberechnung"

WakeUpCaps   = "Wake-up-Funktionen"

IntMod = "Interrupt-Moderation"

MaxIrq = "Max. IRQ pro Sek."

LogMsg = "Statusmeldungen protokollieren"

NumRcv = "Anzahl Empfangspuffer"

NumTx  = "Anzahl Sendepuffer"

RLMT  = "RLMT-Modus"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "Bevorzugter Port"

On = "Ein"

Off = "Aus"

Enabled = "Aktiviert"

Disabled = "Deaktiviert"

Non = "Keine"

Err = "Fehler"

Wrn = "Warnungen"

Sta = "Statusmeldungen"

All = "Alle Meldungen"

A = "A"

B = "B"

Autosense = "Automatische Erkennung"

10MHD = "10 Mbit/s Halbduplex"

10MFD = "10 Mbit/s Vollduplex"

100MHD = "100 Mbit/s Halbduplex"

100MFD = "100 Mbit/s Vollduplex"

1000MFD = "1000 Mbit/s Vollduplex"

Magic Packet = "Magic Packet"

Pattern Match = "Pattern Match"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Änderung des Linkstatus"

SpeedDuplex = "Geschwindigkeit und Duplexmodus"

SpeedDuplexA = "Geschwindigkeit/Duplex Port A"

SpeedDuplexB = "Geschwindigkeit/Duplex Port B"

FlowCtrl = "Datenflusskontrolle"

FlowCtrlA = "Datenflusskontrolle Port A"

FlowCtrlB = "Datenflusskontrolle Port B"

QoSSup = "802.1p Unterstützung"

QoSSupA = "802.1p Unterstützung Port A"

QoSSupB = "802.1p Unterstützung Port B"

WakeFromShut = "Wake-up aus abgeschaltetem Zust."

TcpSegmentation ="TCP-Segmentierung"

BatSpeed = "Batteriemodus-Geschwindigkeit"

Fast = "Energiespar-Geschwindigkeit"

Gig = "Höchstgeschwindigkeit"

BatLinkDet = "Linkerkennung im Batteriemodus"

NoPwrSave = "Keine Energieeinsparung"

MaxPwrSave = "Maximale Energieeinsparung"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "Jumbo Frames"

Bytes4088 = "4088 Byte"

Bytes9014 = "9014 Byte"





















;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; undefined

[Strings.040A]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "Dirección de red"

HwCsum = "Suma de comprobación hardware"

WakeUpCaps   = "Capacidades de reactivación"

IntMod = "Moderación de interrupción"

MaxIrq = "IRQ máx. por seg."

LogMsg = "Mensajes de estado del registro"

NumRcv = "Número de búferes de recepción"

NumTx  = "Número de búferes de transmisión"

RLMT  = "Modo RLMT"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "Puerto preferido"

On = "Encendido"

Off = "Apagado"

Enabled = "Activado"

Disabled = "Desactivado"

Non = "Ninguna"

Err = "Errores"

Wrn = "Advertencias"

Sta = "Mensajes de estado"

All = "Todos los mensajes"

A = "A"

B = "B"

Autosense = "Orientación automática"

10MHD = "Dúplex media 10Mbps"

10MFD = "Dúplex completa 10Mbps"

100MHD = "Dúplex media 100Mbps"

100MFD = "Dúplex completa 100Mbps"

1000MFD = "Dúplex completa 1000Mbps"

Magic Packet = "Magic Packet"

Pattern Match = "Pattern Match"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Cambio de enlace"

SpeedDuplex = "Velocidad y dúplex del enlace"

SpeedDuplexA = "Velocidad y dúplex puerto A"

SpeedDuplexB = "Velocidad y dúplex puerto B"

FlowCtrl = "Control de flujo"

FlowCtrlA = "Control de flujo de puerto A"

FlowCtrlB = "Control de flujo de puerto B"

QoSSup = "Soporte de 802.1p"

QoSSupA = "Soporte de 802.1p de puerto A"

QoSSupB = "Soporte de 802.1p de puerto B"

WakeFromShut = "Wake From Shutdown"

TcpSegmentation = "Descarga de Segmentación TCP"

BatSpeed = "BatterySpeedSettings"

Fast = "SmartSpeedDown"

Gig = "FullSpeed"

BatLinkDet = "BatteryModeLinkDetection"

NoPwrSave = "NoEnergySaving"

MaxPwrSave = "MaximumEnergySaving"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "Tramas Jumbo"

Bytes4088 = "4088 bytes"

Bytes9014 = "9014 bytes"

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; undefined

[Strings.040C]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "Adresse réseau"

HwCsum = "Contrôle de parité du matériel"

WakeUpCaps   = "Capacités de réveil"

IntMod = "Modération de l'interruption"

MaxIrq = "IRQ max. par seconde"

LogMsg = "Messages d'état du journal"

NumRcv = "Nombre de tampons de réception"

NumTx  = "Nombre de tampons transmission"

RLMT  = "Mode RLMT"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "Port préféré"

On = "Actif"

Off = "Inactif"

Enabled = "Activé(e)"

Disabled = "Désactivé(e)"

Non = "Aucun"

Err = "Erreurs"

Wrn = "Avertissements"

Sta = "Messages d'état"

All = "Tous les messages"

A = "A"

B = "B"

Autosense = "Détection automatique"

10MHD = "10 Mbits/s Semi-duplex"

10MFD = "10 Mbits/s Duplex intégral"

100MHD = "100 Mbits/s Semi-duplex"

100MFD = "100 Mbits/s Duplex intégral"

1000MFD = "1000 Mbits/s Duplex intégral"

Magic Packet = "Magic Packet"

Pattern Match = "Pattern Match"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Changement du lien"

SpeedDuplex = "Vitesse de liaison et duplex"

SpeedDuplexA = "Vitesse de liaison et duplex Port A"

SpeedDuplexB = "Vitesse de liaison et duplex Port B"

FlowCtrl = "Contrôle de flux"

FlowCtrlA = "Contrôle de flux Port A"

FlowCtrlB = "Contrôle de flux Port B"

QoSSup = "802.1p Support"

QoSSupA = "802.1p Support Port A"

QoSSupB = "802.1p Support Port B"

WakeFromShut = "Reveil de l'état arreté"

TcpSegmentation = "Segmentation TCP"

BatSpeed = "Vitesse en mode batterie"

Fast = "Reduction d'énergie"

Gig = "Pleine vitesse"

BatLinkDet = "Détection en mode batterie"

NoPwrSave = "Pas des économies d'énergie"

MaxPwrSave = "Économies d'énergie maximales"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "Trames étendues"

Bytes4088 = "4088 octets"

Bytes9014 = "9014 octets"

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; Italian (Standard)

[Strings.0410]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "Indirizzo di rete"

HwCsum = "Checksum hardware"

WakeUpCaps   = "Funzioni Wake Up "

IntMod = "Moderazione interrupt"

MaxIrq = "Max IRQ per sec"

LogMsg = "Messaggi di stato registro"

NumRcv = "Numero di buffer di ricezione"

NumTx  = "Numero di buffer di trasmissione"

RLMT  = "Modalità RLMT"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "Porta preferita"

On = "Attivato"

Off = "Disattivato"

Enabled = "Attivato"

Disabled = "Disattivato"

Non = "Nessuno"

Err = "Errori"

Wrn = "Avvertenze"

Sta = "Messaggi di stato"

All = "Tutti i messaggi"

A = "A"

B = "B"

Autosense = "Autoriconoscimento"

10MHD = "10Mbps half duplex"

10MFD = "10Mbps full duplex"

100MHD = "100Mbps half duplex"

100MFD = "100Mbps full duplex"

1000MFD = "1000Mbps full duplex"

Magic Packet = "Magic Packet"

Pattern Match = "Pattern Match"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Cambio collegamento"

SpeedDuplex = "Velocità di collegamento e duplex"

SpeedDuplexA = "Velocità e duplex Porta A"

SpeedDuplexB = "Velocità e duplex Porta B"

FlowCtrl = "Controllo del flusso"

FlowCtrlA = "Controllo del flusso Porta A"

FlowCtrlB = "Controllo del flusso Porta B"

QoSSup = "802.1p Supporto"

QoSSupA = "802.1p Supporto Porta A"

QoSSupB = "802.1p Supporto Porta B"

WakeFromShut = "Wake From Shutdown"

TcpSegmentation = "Offload della segmentazione TCP"

BatSpeed = "BatterySpeedSettings"

Fast = "SmartSpeedDown"

Gig = "FullSpeed"

BatLinkDet = "BatteryModeLinkDetection"

NoPwrSave = "NoEnergySaving"

MaxPwrSave = "MaximumEnergySaving"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "Frame jumbo"

Bytes4088 = "4088 byte"

Bytes9014 = "9014 byte"

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; Japanese

[Strings.0411]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "Í0Ã0È0ï0ü0¯0¢0É0ì0¹0"

HwCsum = "Ï0ü0É0¦0§0¢0n0Á0§0Ã0¯0 µ0à0"

WakeUpCaps   = "¦0§0¤0¯0 ¢0Ã0×0_jý€"

IntMod = "rRŠ0¼0À{¦^"

MaxIrq = "ÎkÒyg'Y IRQ"

LogMsg = "í0°0 ¹0Æ0ü0¿0¹0 á0Ã0»0ü0¸0"

NumRcv = "×SáOÐ0Ã0Õ0¡0pe"

NumTx  = "âŽ
Ð0Ã0Õ0¡0pe"

RLMT  = "RLMTâ0ü0É0"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "*QHQÝ0ü0È0"

On = "ª0ó0"

Off = "ª0Õ0"

Enabled = "ª0ó0"

Disabled = "ª0Õ0"

Non = "j0W0"

Err = "¨0é0ü0"

Wrn = "f‹JT"

Sta = "¹0Æ0ü0¿0¹0 á0Ã0»0ü0¸0"

All = "hQf0n0á0Ã0»0ü0¸0"

A = "A"

B = "B"

Autosense = "êÕRaåw"

10MHD = "10Mbps JSŒNÍ‘"

10MFD = "10Mbps hQŒNÍ‘"

100MHD = "100Mbps JSŒNÍ‘"

100MFD = "100Mbps hQŒNÍ‘"

1000MFD = "1000Mbps hQŒNÍ‘"

Magic Packet = "Þ0¸0Ã0¯0 Ñ0±0Ã0È0"

Pattern Match = "Ñ0¿0ü0ó0 Þ0Ã0Á0"

Mag Pack Patt Match = "Þ0¸0Ã0¯0 Ñ0±0Ã0È0h0Ñ0¿0ü0ó0 Þ0Ã0Á0"

Link Change = "ê0ó0¯0n0	Yôf"

SpeedDuplex = "ê0ó0¯0¦^h0Ç0å0×0ì0Ã0¯0¹0"

SpeedDuplexA = "ê0ó0¯0¦^h0Ç0å0×0ì0Ã0¯0¹0Ý0ü0È0A"

SpeedDuplexB = "ê0ó0¯0¦^h0Ç0å0×0ì0Ã0¯0¹0Ý0ü0È0B"

FlowCtrl = "Õ0í0ü06R¡_"

FlowCtrlA = "Õ0í0ü06R¡_ Ý0ü0È0A"

FlowCtrlB = "Õ0í0ü06R¡_ Ý0ü0È0B"

QoSSup = "802.1p µ0Ý0ü0È0"

QoSSupA = "802.1p µ0Ý0ü0È0 Ý0ü0È0A"

QoSSupB = "802.1p µ0Ý0ü0È0 Ý0ü0È0B"

WakeFromShut = "Wake From Shutdown"

TcpSegmentation = "TCP »0°0á0ó0Æ0ü0·0ç0ó0n0ª0Õ0í0ü0É0"

BatSpeed = "BatterySpeedSettings"

Fast = "SmartSpeedDown"

Gig = "FullSpeed"

BatLinkDet = "BatteryModeLinkDetection"

NoPwrSave = "NoEnergySaving"

MaxPwrSave = "MaximumEnergySaving"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "g'YÕ0ì0ü0à0 µ0¤0º0"

Bytes4088 = "4088 Ð0¤0È0"

Bytes9014 = "9014 Ð0¤0È0"

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; Korean

[Strings.0412]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "$±¸ÒÌÆlÐ üÈŒÁ"

HwCsum = "XÕÜ´èÆ´Å €¬¬ÀiÕĬ"

WakeUpCaps   = "ܤÂ\Ñ Ï0® 0®¥²"

IntMod = "xÇ0Ñý·¸Ò DÆTÖ"

MaxIrq = "Íù² \ͳ IRQ"

LogMsg = "\¸ø­ ÁÀÜÐ TºÜÂÀÉ"

NumRcv = "Âà „¼|Ó Â"

NumTx  = "¡Áà „¼|Ó Â"

RLMT  = "RLMT ¨ºÜ´"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "0®ø¼ $ÁÈ ìÓ¸Ò"

On = "Ï0®"

Off = "D°0®"

Enabled = "\Ö1ÁTÖ(´"

Disabled = "\Ö1Á tÕÈ(´"

Non = "ÆÅLÇ"

Err = "$ÆX¹"

Wrn = "½¬à¬"

Sta = "ÁÀÜÐ TºÜÂÀÉ"

All = "¨ºà´ TºÜÂÀÉ"

A = "A"

B = "B"

Autosense = "ÇÙ³ ¬ÀÉ"

10MHD = "10Mbps ¼tÇÉ"

10MFD = "10Mbps ÈtÇÉ"

100MHD = "100Mbps ¼tÇÉ"

100MFD = "100Mbps ÈtÇÉ"

1000MFD = "1000Mbps ÈtÇÉ"

Magic Packet = "ä¹ÁÉ (Ó·Ð"

Pattern Match = "(Ó4Ñ |ÇXÎ"

Mag Pack Patt Match = "ä¹ÁÉ (Ó·Ð ¼ (Ó4Ñ |ÇXÎ"

Link Change = "Á¹lÐ À¼½¬"

SpeedDuplex = "Á¹lÐ Áij ¼ tÇÉ1Á"

SpeedDuplexA = "Á¹lÐ Áij ¼ tÇÉ1Á ìÓ¸Ò A"

SpeedDuplexB = "Á¹lÐ Áij ¼ tÇÉ1Á ìÓ¸Ò B"

FlowCtrl = "Pׄ¹ È´Å"

FlowCtrlA = "Pׄ¹ È´Å ìÓ¸Ò A"

FlowCtrlB = "Pׄ¹ È´Å ìÓ¸Ò B"

QoSSup = "802.1p ÀÉÐÆ "

QoSSupA = "802.1p ÀÉÐÆ ìÓ¸Ò A"

QoSSupB = "802.1p ÀÉÐÆ ìÓ¸Ò B"

WakeFromShut = "Wake From Shutdown"

TcpSegmentation = "TCP 8Áø­<º¸ÒTÖ $ÆÕ\¸Ü´"

BatSpeed = "BatterySpeedSettings"

Fast = "SmartSpeedDown"

Gig = "FullSpeed"

BatLinkDet = "BatteryModeLinkDetection"

NoPwrSave = "NoEnergySaving"

MaxPwrSave = "MaximumEnergySaving"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "\ͳ Õ¸„Ç lÐ0®"

Bytes4088 = "4088 ¼tǸÒ"

Bytes9014 = "9014 ¼tǸÒ"

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; Polish

[Strings.0415]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "Adres sieciowy"

HwCsum = "Podsumowanie sprawdzenia sprz
tu"

WakeUpCaps   = "Funkcje budzenia"

IntMod = "Moderacja przerwania"

MaxIrq = "Maks. IRQ na sek."

LogMsg = "Zapisywanie komunikatów o stat."

NumRcv = "Liczba buforów odbiorczych"

NumTx  = "Liczba buforów nadawczych"

RLMT  = "RLMT Mode"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "Preferowany port"

On = "WB

czone"

Off = "WyB

czone"

Enabled = "WB

czony"

Disabled = "WyB

czony"

Non = "{
adne"

Err = "BB

dy"

Wrn = "Ostrze|
enia"

Sta = "Komunikaty o stanie"

All = "Wszystkie komunikaty"

A = "A"

B = "B"

Autosense = "Automatyczne wykrywanie"

10MHD = "10 Mbps PóB
dupleks"

10MFD = "10 Mbps PeB
en dupleks"

100MHD = "100 Mbps PóB
dupleks"

100MFD = "100 Mbps PeB
en dupleks"

1000MFD = "1000 Mbps PeB
en dupleks"

Magic Packet = "Magic Packet"

Pattern Match = "Pattern Match"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Zmiana B

cza"

SpeedDuplex = "Szybko[

 i Dupleks"

SpeedDuplexA = "Szybko[

 i Dupleks Port A"

SpeedDuplexB = "Szybko[

 i Dupleks Port B"

FlowCtrl = "Kontrola przepB
ywu danych"

FlowCtrlA = "Kontrola przepB
ywu danych Port A"

FlowCtrlB = "Kontrola przepB
ywu danych Port B"

QoSSup = "801.1p ObsB
uga"

QoSSupA = "802.1p ObsB
uga Port A"

QoSSupB = "802.1p ObsB
uga Port B"

WakeFromShut = "Uaktywnianie z WyB

czenia"

TcpSegmentation ="Segmentacja TCP"

BatSpeed = "Szybko[

 w trybie bateryjnym"

Fast = "Zmniejszona szybko[

 B

cza"

Gig = "Maksymalna szybko[

 B

cza"

BatLinkDet = "Wykrywanie B

cza w trybie bat."

NoPwrSave = "Bez oszcz
dno[
ci energii"

MaxPwrSave = "Maks. oszcz
dno[

 energii"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "Jumbo Frames"

Bytes4088 = "4088 Bytes"

Bytes9014 = "9014 Bytes"

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; Portuguese (Brazil)

[Strings.0416]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "Endereço de Rede"

HwCsum = "Teste Lógico de Hardware"

WakeUpCaps   = "Capacidades de Despertar"

IntMod = "Moderação de Interrupção"

MaxIrq = "IRQ Máx por Seg"

LogMsg = "Registrar Mensagens de Estado"

NumRcv = "Número de Buffers de Recepção"

NumTx  = "Número de Buffers de Transmissão"

RLMT  = "Modo RLMT"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "Porta Preferida"

On = "Ligado"

Off = "Desligado"

Enabled = "Ativado"

Disabled = "Desativado"

Non = "Nenhum"

Err = "Erros"

Wrn = "Avisos"

Sta = "Mensagens de Estado"

All = "Todas as Mensagens"

A = "A"

B = "B"

Autosense = "Autodetecção"

10MHD = "Semi Dúplex 10Mbps"

10MFD = "Dúplex Completo 10Mbps"

100MHD = "Semi Dúplex 100Mbps"

100MFD = "Dúplex Completo100Mbps"

1000MFD = "Dúplex Completo1000Mbps"

Magic Packet = "Magic Packet"

Pattern Match = "Pattern Match"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "Troca de Vínculo"

SpeedDuplex = "Velocidade de link e duplex"

SpeedDuplexA = "Velocidade de link/duplex Porta A"

SpeedDuplexB = "Velocidade de link/duplex Porta B"

FlowCtrl = "Controle de Fluxo"

FlowCtrlA = "Controle de Fluxo Porta A"

FlowCtrlB = "Controle de Fluxo Porta B"

QoSSup = "Suporte 802.1p"

QoSSupA = "Suporte 802.1p Porta A"

QoSSupB = "Suporte 802.1p Porta B"

WakeFromShut = "Wake From Shutdown"

TcpSegmentation = "Offload Segmentação de TCP"

BatSpeed = "BatterySpeedSettings"

Fast = "SmartSpeedDown"

Gig = "FullSpeed"

BatLinkDet = "BatteryModeLinkDetection"

NoPwrSave = "NoEnergySaving"

MaxPwrSave = "MaximumEnergySaving"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "Frames grandes"

Bytes4088 = "4088 Bytes"

Bytes9014 = "9014 Bytes";; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"





; Russian

[Strings.0419]

;; Do NOT translate

;---------------------------------------------------------------------------------------------------

D-Link = "D-Link"

;---------------------------------------------------------------------------------------------------

;; Translation from this point ON.

;---------------------------------------------------------------------------------------------------



NetAddress   = "!5B52>9 04@5A"

HwCsum = "??0@0B=K9 :>=B@>;L AC<<K"

WakeUpCaps   = ">7<>6=>AB8 ?@>1C645=8O"

IntMod = "#?@02;5=85 ?@5@K20=8O<8"

MaxIrq = "0:A. IRQ - HB/A5:."

LogMsg = "0?8AK20BL AB0BCA. A>>1I5=8O"

NumRcv = "'8A;> 1CD5@>2 ?@85<0"

NumTx  = "'8A;> 1CD5@>2 ?5@540G8"

RLMT  = " 568< RLMT"

Link  = "CLS"   

OtherPort    = "CLP" 

Segment = "CLPSS" 

Preferred    = "@54?>GB8B5;L=K9 ?>@B"

On = ":;."

Off = "K:;."

Enabled = ":;NG0BL" 

Disabled = "B:;NG0BL"

Non = "5B"

Err = "H81:8"

Wrn = "@54C?@5645=8O"

Sta = "!B0BCA=K5 A>>1I5=8O"

All = "A5 A>>1I5=8O"

A = "A"

B = "B"

Autosense = "2B>>?@545;5=85"

10MHD = "1018B/A ?>;C4C?;5:A"

10MFD = "1018B/A ?>;=K9 4C?;5:A"

100MHD = "10018B/A ?>;C4C?;5:A"

100MFD = "10018B/A ?>;=K9 4C?;5:A"

1000MFD = "100018B/A ?>;=K9 4C?;5:A"

Magic Packet = "Magic Packet"

Pattern Match = "Pattern Match"

Mag Pack Patt Match = "Magic Packet & Pattern Match"

Link Change = "7<5=. AB0BCA0 A>548=5=8O"

SpeedDuplex = "!:>@>ABL 8 4C?;5:A"

SpeedDuplexA = "!:>@>ABL 8 4C?;5:A, ?>@B "

SpeedDuplexB = "!:>@>ABL 8 4C?;5:A, ?>@B "

FlowCtrl = "#?@02;5=85 ?>B>:>< 40==KE"

FlowCtrlA = "#?@02;5=85 40==KE, ?>@B A"

FlowCtrlB = "#?@02;5=85 40==KE, ?>@B B"

QoSSup = ">445@6:0 802.1p"

QoSSupA = ">445@6:0 802.1p, ?>@B A"

QoSSupB = ">445@6:0 802.1p, ?>@B B"

WakeFromShut = "@>AK?0BLAO >B 2K:;NG5=85"

TcpSegmentation = "TCP A53<5=B0F8O"

BatSpeed = "C:>@>ABL ?5@540G8 >B 10B0@58"

Fast = "#<5=LH5=85 A:>@>AB8"

Gig = "0:A. A:>@>ABL ?5@540G8"

BatLinkDet = "1=0@C65=85 :0=0;0 >B 10B0@58"

NoPwrSave = "57 M:>=><88 M=5@388"

MaxPwrSave = "M0:A. M:>=><88 M=5@388"

EnDetPwrSave = "EnergyDetect+"!"

MaxFrSize    = "830=BA:89 Frame"

Bytes4088 = "4088 109B"

Bytes9014 = "9014 109B"



;; Do NOT translate

;---------------------------------------------------------------------------------------------------

DriverDisk = "D-Link DGE-5xx Gigabit Ethernet Adapter Installation Disk"





Dlink.DeviceDesc4360	= "DGE-560T Gigabit PCI Express Ethernet Adapter"

Dlink.DeviceDesc4320	= "D-Link DGE-530T Gigabit Ethernet Adapter"

Dlink.DeviceDesc4346	= "DGE-560SX Single fiber Gigabit Ethernet PCI-E Adapter V.A1"

Dlink.DeviceDesc550SX = "DGE-550SX Single fiber Gigabit Ethernet PCI-X Adapter"

m4cxa64.DriverDesc	= "NDIS5.1 Miniport Driver for D-Link PCI Express Ethernet Controller"

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.