BizCardReader 300G USB driver installation
The installation CD is needed to install the USB drivers
for the BizCardReader 300G card scanner.
WEB DOWNLOAD
If you downloaded this driver from the web, the required files will
be copied by default to C:\TEMP\Driver300G.
Note this driver directory.
FIRST TIME INSTALLATION Windows XP/VISTA
------------------------------------------------------
Before installing the scanner driver, you should log on to Windows as
Administrator to ensure that you have sufficient privilege to
install the driver.
1. Insert the driver disk/CD into the disk/CD ROM drive.
2. Plug the Scanner into the system's USB port.
3. The system will indicate that a new "BizcardReader 300G"
hardware has been found. Press "Next" to continue.
4. Select "Search for the best driver (recommended)..." and click Next.
5. If prompted to specify a location for the driver search,
select by checking the box for the CD ROM,
or specify C:\TEMP\Driver300G.
6. Follow the on screen instructions and continue the
installation procedure to completion.
UPDATING THE SCANNER DRIVE
----------------------------------------------------
If an older copy of the BCR 300G driver is alreay installed, you can
start the Windows driver update wizard for the scanner as follows:
a. Plug in the scanner into the USB port.
b. Click on Start --> Settings --> Control Panel.
c. In Control Panel, double click on the System icon.
For Widows 2000/XP, click on Hardware tab -->
Device Manager --> Imaging Device --> BizCardReader 300G.
d. Select Properties-->Driver tab --> Update Driver.
e. Follow the instructions from the driver wizard. When needed,
specify the driver location which is the CD ROM,
or specify C:\TEMP\Driver300G.
TROUBLESHOOTING BCR 300G/600C SCANNER
-------------------------------
If the scanner will not scan after you install the driver, you should try
to re-install it. The following procedure describes how this can be done.
1. Unplug the USB cable from the scanner for a few seconds and then plug it back in.
2. If a message indicating that a new device is found, and Windows is searching
for the driver, then follow the steps described above to install the scanner driver.
Otherwise go on to the next step.
3. Start up the Windows Control Panel by clicking on the Windows task bar
Start-->Settings-->Control Panel.
4. In the Control Panel, double click on the System icon to start it.
For Widows 2000/XP, click on Hardware tab --> Device Manager
5. If you see the BizCardReader 300G/600C device with an exclamation mark beside it, highlight it and click Properties/Update to re-install the driver.
6. Follow the procedure described above to update the driver.
Conflict with other USB devices
-------------------------------
Some problems are due to conflicts with other devices on the USB.
To resolve this, disconnect all other devices (and/or hubs), and plug the card scanner directly
into the USB port of the computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.