1. dpx1200_drv.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (dpx1200_drv.exe)

DuplexScan 1200 Scanner driver installation

The installation CD is needed to install the scanner driver.

WEB DOWNLOAD
If you downloaded this driver from the web, the required files will 
be copied by default to C:\TEMP\DriverDPX1200.
Note this driver directory.

FIRST TIME INSTALLATION Windows 7/VISTA/XP
------------------------------------------------------
Before installing the scanner driver, you should log on to Windows as
Administrator to ensure that you have sufficient privilege to
install the driver.

General Installation Procedure
1. Insert the driver disk/CD into the disk/CD ROM drive. 
2. Plug the Scanner into the system's USB port.
3. The system will indicate that a new scanner hardware has been found. 
   Press "Next" to continue.
4. Select "Search for the best driver (recommended)..." and click Next.
5. If prompted to specify a location for the driver search, select by 
   checking the box for the CD ROM, and/or specify the folder 
   where the downloaded driver files may be found.
6. Follow the on screen instructions and continue the 
   installation procedure to completion.
  
Windows 7 and VISTA
You can start the Windows driver install/update wizard for 
the scanner as follows:
a. Plug in the scanner into the USB port.
b. Click on Start in the Windows Task bar and open the Control Panel.
c. In Control Panel, click on "Hardware and Sound" and 
   then "Device Manager" in the Devices section. 
d. In the Device Manager, locate the scanner item either under 
   Imaging Devices or Other Devices. 
e. Right-click on the scanner item and select "Update Driver". 
f. Follow the instructions from the driver wizard. When needed, 
   specify the driver location, which is the CD ROM, or specify 
   the folder where the downloaded driver files may be found.

Windows XP
You can start the Windows driver install/update wizard 
   for the scanner as follows:
a. Plug in the scanner into the USB port.
b. Click on Start in the Windows Task bar and open the Control Panel.
c. In Control Panel, click on  Performance and Maintainence -> System icon. 
d. Next, open the Device Manager in the Hardware section. 
d. In the Device Manager, locate the scanner item under Imaging Devices. 
e. Right-click on the scanner item to select 
   Properties-->Driver tab --> Update Driver. 
f. Follow the instructions from the driver wizard. 
   When needed, specify the driver location, which is the CD ROM, 
   or specify the folder where the downloaded driver files may be found.


Conflict with other USB devices
-------------------------------
Some problems are due to conflicts with other devices on the USB. 
To resolve this, disconnect all other devices (and/or hubs), and plug the 
card scanner directly  into the USB port of the computer.