####################################################################
# Resource File Version 1.0 #
# TEXT LABEL NAMES #
####################################################################
ADAPTER_OPERATION_SSD_GUARD_ENABLE=Ena(b)le SSD Guard
ADAPTER_OPERATION_DESC_SSD_GUARD_ENABLE=This will enable the SSD Guard capability.
ADAPTER_OPERATION_SSD_GUARD_DISABLE=Disa(b)le SSD Guard
ADAPTER_OPERATION_DESC_SSD_GUARD_DISABLE=This will disable the SSD Guard capability.
PROPERTY_SSD_GUARD=SSD Guard
PROPERTY_SSD_GUARD_ENABLED=Enabled
PROPERTY_SSD_GUARD_DISABLED=Disabled
MSG_PDMISSING_CONFIRM=Warning: This will mark the Physical Drive as Missing! Are you sure?
RAID_LEVEL_1_DISPLAY_STRING=RAID 1
MSG_MEMFREE_FAILED=Failed to free memory
PROPERTY_ISUARTPRESENT_TEXT=UART Present
MANUAL_MODE_ARRAY=(A)rray Selection
MANUAL_MODE_ARRAY_1=Array Selection
AUTHENTICATE_DIALOG_TITLE=Enter User Name & Password
RECONWIZARD_TEXT=Reconstruction Wizard
IOPOLICY_CACHED=Cached IO
LEGEND_UNUSED_TEXT=Available
CONFIGWIZARD_TEXT=Configuration Wizard
PROPERTY_DEVID_TEXT=Device ID
PROPERTY_PSUPPLYNUMBER_TEXT=Number of Power Supplies
MENU_LOGVIEW_TEXT=(V)iew Saved Log
LEGEND_USED_TEXT=Configured
LABEL_BGIRATE_TEXT=(B)GI Rate
WRITEPOLICY_WRITE_BACK= Write Back
WRITEPOLICY_ALWAYS_WRITE_BACK = Always Write Back
WRITEPOLICY_WRITE_BACK_WITH_BBU=Write Back with BBU
BBU_MFG_DATE=Mfg Date
OPERATION_INSTRUCTION_TEXT=<html>Select an operation from the left and press go to<br>invoke the selected Operation!</html>
LABEL_EXISTINGARRAY_ONLY=Use (E)xisting Arrays Only
LDRIVE_STATE_OFFLINE=Offline
PROPERTY_VENDORINFO_TEXT=Vendor ID
MSG_SET_CONTROLLER_PROP=Warning: This will set controller properties.
MSG_ASSISTEDCONF_FAILED=Assisted Configuration Failed!
PDTYPE_FC=Fibre Channel
BBU_MAX_ERROR=Maximum Error Margin
MSG_FAILED_FOREIGNCFG=Cannot read Foreign Config!
OUT_OF= out of
FAILED_TO_IMPORT= configurations failed to import.
PROPERTY_FWSTATE_TEXT=Firmware State
RECON_DRIVE_SEL=Drive Selection
ENCL_ELEMSTATUS_UNRECOVERABLE=Unrecoverable
ENCL_ELEMSTATUS_NOT_INSTALLED=Not Installed
PROPERTY_SUBVENDORID_TEXT=SubVendor ID
MSG_NO_FOREIGN_CONFIG=NO Foreign Configuration is found!
MSG_RECON_INPROGRESS=Operation cannot be started while reconstruction is in progress!
MSG_STATUS_GUIDEDFINISH=Change the number, size and other parameters for Virtual Disks and press Next
BBU_TYPE=Battery Type
GUIDED_MSG_TEXT=The capacity mentioned will be used as an approximation while creating the virtual disks.
MENU_LOG_TEXT=(L)og
MSG_DELPDFROMARRAY_LDEXISTS=Cannot delete Physical Drive from the array because one or more Virtual Disk is defined on this array!
PROPERTY_CACHEFLUSHINTERVAL_TEXT=Cache Flush Interval
BUTTON_GUIDEDCONF_TEXT=(G)uided Configuration
MSG_IGNORE_FOREIGN_CONFIG=Do you want to ignore the foreign configuration?
MSG_NOARRAY_SELECTED=Please specify an array!
BUTTON_IMPORT_CONFIG=Import Configuration
LABEL_UNUSEDARRAYS_TEXT=Unused Arrays
BUTTON_RECLAIM_TEXT=Reclai(m)
RAID_LEVEL_5_DISPLAY_STRING=RAID 5
MSG_CLEAR_FOREIGN_CONFIG=This will clear the selected Foreign Configuration! Are you sure?
MSG_CONFIG_FAILED=Cannot write configuration: Unknown Exception!
PROPERTY_RAWSIZE_TEXT=Raw Size
PD_STATE_OFFLINE=Offline
MSG_DISBL_ALARM=Warning: This will start Patrol Read operation.
MSG_INVALID_CTRL=Incorrect controller number specified
MSG_CONF_EXISTS=Configuration exists. You must clear the existing configuration before adding a new one.
MSG_SCSINAME_FAILED=Failed to get SCSI device name
PD_STATE_FAILED=Failed
LEGEND_HIGHLIGHTED_TEXT=Selected VD
BBU_MFG_NAME=Mfg Name
ADAPTER_OPERATION_8_DESC=User configurable task rate priorities for controller
FAILED_SERVER=Failed
MSG_GUIDEDCONFIG_FAILED=Guided Configuration failed!
MANUAL_DRIVE_SELECTION_JTABLE_PORT_COLUMN_HEADING=Port
MANUAL_MODE_FINISH=Fi(n)ish
MANUAL_MODE_FINISH_1=Finish
MSG_NOLD_SELECTED=Please specify a virtual disk!
LABEL_CAPACITY_TEXT=Total (C)apacity:
MSG_VERSION_MISMATCH=Mismatch in versions.
BBU_OPERATION_REFRESH_DESC=Rescans and updates the BBU information
RAID_LEVEL_3_DISPLAY_STRING=RAID 3
BBU_OPERATION_SLEEP=Sleep
MSG_NOLD_TEXT=Please create at least one virtual disk and then proceed to next step!
MSG_CONFIRM_ARRAYDELETE=This will delete the Array. Are you sure?
MSG_STATUS_ARRAYSEL=Select one or more physical drive(s) and use the right arrow to move them to the right panel to create arrays
MSG_FW_REBOOT=You must reboot the system to bring the firmware in effect
ABOUT_OSVERSION_TEXT=Operating System Version
DISK_CACHE_UNCHANGED=Unchanged
PDTYPE_SATA=SATA
PROPERTY_PDSTATE_TEXT=Physical Drive State
MSG_INAVLID_PARAM=The input parameter to the command was invalid
LOGICAL_TAB_TEXT=Logical
BUTTON_UPDATE_TEXT=(U)pdate
MAXPD_COUNT_TEXT=Ma(x)imum PD Count for patrolling:
COER_MODE_128MB=128 MB
PROPERTY_ISBBUPRESENT_TEXT=BBU Present
MSG_STATUS_GUIDED=Select the choices given above and then proceed to next step for guided configuration
LOG_DETAILS_DIALOG=Event Details
PHDRIVE_OPERATION_1_DESC=Changes a drive from OFFLINE state to ONLINE state
PROPERTY_YES_TEXT=Yes
PROPERTY_DEFWRITEPOLICY_TEXT=Default Write Policy
MSG_RECON_CHGRL=This operation cannot be aborted. Do you want to continue?
LABEL_LDNUM_HINT=(D)esired Number of Virtual Disks :
MSG_LINUX_LIBSYSFS_MISSING=libsysfs is not present in the system
RECON_INSERT_BUTTON_TEXT=(A)dd Drive
LABEL_MB_TEXT=MB
LABEL_REDUNDANCY_ONLY=(R)edundancy Only
DEV_DIRECT_TEXT=Disk
DIRECT_IO=Direct IO
BBU_AVGTIMEFULL_CAPACITY=Average Time to Full
MSG_INIT_FAILED=Storelib Initialization failed
MSG_OP_TIMEDOUT=Command to driver timed out
PRPOERTY_HOSTINTERFACE_TEXT=Host Interface
PROPERTY_DEVICEPORTCOUNT_TEXT=Device Port Count
PD_CACHE_ENABLE=Enable
PROPERTY_RECONRATE_TEXT=Reconstruction Rate
MSG_SELECT_ARRAY=Please select one or more arrays!
MAX_DRIVE_SELECTION_EXCEEDED_TEXT=RECONSTRUCTION_CARD_TITLE
LABEL_REDUNDANCY_NO=N(o) Redundancy
MSG_LOGIN_EXFAILURE=Login failed: Exception while login!
LEGEND_LDRIVELOCATION_TEXT=Virtual Disk Location
MSG_NOSTOARGEAPI=No Storage Controller Found!
PROPERTY_TEMPERATURE_TEXT=Temperature
LABEL_ELAPSED_TEXT=Elapsed time:
PD_STATE_REBUILD=Rebuild
READ_AHEAD_NONE=No Read Ahead
LABEL_EXISTINGARRAYS_GROUP=Existing Arrays
RECON_FINISH_SEL=Finish
MSG_SETLDPARAM_FAILED=Cannot set virtual disk parameters!
LABEL_USE_ALLARRAYS=Use Existing and New (A)rrays
LABEL_ADD_HSP=-- Add Hotspare To --
MSG_ABORT_NOT_POSSIBLE=Abort not possible
LABEL_VOLUMEPROP_TEXT=Virtual Disk Parameters
SECOND_TEXT=second
MENU_LOGSAVE_TEXT=(S)ave Log
BUTTON_BROWSE_TEXT=(B)rowse
PHDRIVE_OPERATION_10_DESC=Aborts Locate Physical Drive operation on a physical disk
MSG_DEDICATEDHSP_FAILED=Cannot make dedicated hotspare: Error Code:
LABEL_DEFWRITEPOLICY_TEXT=(W)rite Policy:
LABEL_EVENT_TYPE=Event Type:
MSG_SETLDPROP_CONFIRM=Warning: This will set Virtual Disk properties! Are you sure?
MENU_CONFIG_TEXT=(C)onfiguration
ADAPTER_TEXT=Controller
ABOUT_OSNAME_TEXT=Operating System Name
LABEL_HOSTNAME_TEXT=Host
MSG_CONFIRM_LOGOVERWRITE=File already exists. Do you want to overwrite?
MSG_INVALID_FILETYPE=This is not a valid FW File!
LABEL_ACCESSPOLICY_TEXT=Access Pol(i)cy:
MSG_CLEARCONFIG_FAILED=Clear Configuration failed: Unknown Exception
PHDRIVE_OPERATION_2_DESC=Changes a drive from ONLINE state to OFFLINE state
PDTYPE_UNKNOWN=Unknown
GRP_SHOWPROGRESS_TITLE=Group Show Progress
ENCL_ELEMSTATUS_NONCRITICAL=Non Critical
MSG_PROTOCOL_ERROR=Fatal Error: Network protocol error!
WRITEPOLICY_WRITE_THROUGH=Write Through
PROPERTY_SLOTNUMBER_TEXT=Number of Slots
PRODUCT_INFO=MegaRAID Storage Manager
GRAPHICALVIEW_TAB_TEXT=Graphical View
LABEL_TIME_STAMP=Time of Event:
MSG_FLASHFW_CONFIRM=Warning: This will flash the controller firmware! Current firmware version is
LABEL_INITIALIZATION_TEXT=Initiali(z)ation Type:
PROPERTY_HOSTNAME_TEXT=Host Name
PROPERTY_CLUSTERENABLE_TEXT=Cluster Enable
SORTBYCOMBO_NAME_TEXT=Name
MSG_LDPROGRESS_TEXT=Ongoing Operations on Virtual Disks
NEWLDCREATED_TEXT=New Virtual Disk
MENU_GRINITIALIZE_TEXT=(I)nitialize
BBU_TEMP_STATUS=Temperature
ENCL_ELEMSTATUS_UNKNOWN=Unknown
UNPROTECTED_DRIVE_GROUPS=Unprotected Drive Groups
UNPROTECTED_DRIVE_GROUPS_LABEL=(U)nprotected Drive Groups:
UNPROTECTED_MSG=<html>This global hot spare will not protect the following<br>drive groups because it is a
DRIVE=drive</html>.
CACHED_IO=Cached IO
LDRIVE_OPERATION_8=Set Vi(r)tual Disk Properties
LDRIVE_OPERATION_7=Abort Initialization
PD_STATE_HOTSPARE=Hot Spare
LDRIVE_OPERATION_6=Start Initiali(z)ation
LABEL_REDUNDANCY_TEXT=(R)edundancy Type:
LDRIVE_OPERATION_5=Cancel Check Consistency
NEXT_LEARNTIME_TEXT=Next Learn Time (sec):
LDRIVE_OPERATION_4=(C)heck Consistency
BBU_AVGTIMEEMPTY_CAPACITY=Average Time to Empty
MENU_CONFIGWIZARD_TEXT=Configuration (W)izard
VOLUME_CANDIDATE_PANEL_ADD=Add
BUTTON_CONNECT_TEXT=(C)onnect
BUTTON_FINISH_TEXT=(F)inish
LABEL_FWVERSION_TEXT=Framework Version:
LD_ACCESS_RDONLY=Read Only
PHDRIVE_OPERATION_11_DESC=Assigns the Unconfigured Good drive as a global hotspare
BBU_GAS_GAUGE=Gas Gauge Status
LABEL_POWER_TEXT=Power Supply
MSG_LOGIN_FAILURE=Login failed: Invalid username or password!
MSG_STATUS_IR_MANUALVDCREATE=<html>Select one Array from the top left panel, change the various properties and press accept
DISK_CACHE_DISABLED=Disabled
MSG_CONFIRM=Are you sure?
MSG_STATUS_FINISH=View the summary and finally press Finish to write the configuration
NOBBU_TEXT=No Battery
BBU_OPERATION_SETPROP_DESC=Defines various Battery Operation Parameters
BBU_OPERATION_LEARN_DESC=Starts a battery calibration cycle
LABEL_STRIPESIZE_TEXT=Stri(p)e Size:
PDTYPE_SAS=SAS
RECON_REMOVE_BUTTON_TEXT=REMOVE
LDRIVE_OPERATION_1_DESC=Deletes the specified virtual disk
MSG_INIT_NOT_COMPLETED=Initialization was not yet completed.
TEXT_CLIENT_TIME=Client time
MSG_GET_PARTITION_FAILED=Failed to get partition. Partition may not exist
PD_STATE_UNCONFGOOD=Unconfigured Good
FOREIGN_CONFIG_WIZARD=Foreign Configuration Wizard
MSG_LDOS_MAP_INCOMPLETE=The LD to OS drive mapping is not complete. This will happen when fw reports
SELECTED_DRIVES_TEXT=(S)elected Drives
PROPERTY_ACCESSPOLICY_TEXT=Access Policy
PROPERTY_FLASHSIZE_TEXT=Flash Size
PROPERTY_ISNVRAMPRESENT_TEXT=NVRAM Present
BBU_FW_STATUS=Firmware Status
LABEL_POWERS_TEXT=Power Supplies
PROPERTY_PREDFAILCOUNT_TEXT=Pred Fail Count
PROPERTY_LDCOUNT_TEXT=Virtual Disk Count
ADAPTER_TYPE_PCIX=PCIX
AUTO_MODE_FINISH=Fi(n)ish
AUTO_MODE_FINISH_1=Finish
MSG_PDREBUILD_CONFIRM=Warning: This will rebuild the Physical Drive! Are you sure?
PROPERTY_LDDEGRADEDCOUNT_TEXT=Degraded Virtual Disk Count
BBU_ABSCHARGE_STATE=Absolute State of Charge
PROPERTY_LDRIVESIZE_TEXT=Size
ADAPTER_TYPE_PCIE=PCIE
MSG_INVALID_ARRAYSIZE=Please Create arrays with at least 2 physical drives then go to next step!
LABEL_READPOLICY_TEXT=R(e)ad Policy:
GUIDED_CONFIG_STEP3=Finish
GUIDED_CONFIG_STEP3_1=Finish
GUIDED_CONFIG_STEP2=V(i)rtual Disk Parameters
GUIDED_CONFIG_STEP2_1=Virtual Disk Parameters
BUTTON_ABORT_TEXT=Abort
GUIDED_CONFIG_STEP1=G(u)ided Config
GUIDED_CONFIG_STEP1_1=Guided Config
MSG_AUTOCONFIG_FAILED=Auto Configuration failed!
RECON_DELETE_BUTTON_TEXT=(R)emove Drive
MSG_ABORTPROG_CONFIRM=Do you want to abort this operation?
BBU_OPERATION_REFRESH=Refresh
PROPERTY_FWBUILDTIME_TEXT=Firmware Build Time
BBU_DESIGN_CAPACITY=Design Capacity
READ_AHEAD_ALWAYS=Always Read Ahead
LABEL_FANS_TEXT=Fans
SORTBYCOMBO_TYPE_TEXT=Type
CONFIGURATION_NOTE=<html>Note: Drives containing boot partitions or foreign configurations will not be \
listed because they can not be used in new configurations.</html>
MSG_CANNOT_ABORT_OP=The operation cannot be aborted!
PHDRIVE_OPERATION_12_DESC=Designates a ready or Unconfigured Good drive as a dedicated hotspare to the specified array(s)
LABEL_NOREDUNDANCY_TEXT=No Redundancy
MSG_PDOFFLINE_CONFIRM=Warning: This will make the Physical Drive Offline! Are you sure?
MSG_PDONLINE_CONFIRM=Warning : Forcing a failed physical disk to Online will result in changing the virtual disk state. \
\nThis disk will immediately start participating in the virtual disk operations and may lead to data corruption. \
\n\nAre you sure you want to continue?
RECON_NOCHANGE_BUTTON_TEXT=(C)hange RAID Level
GRP_INITDLG_TITLE=Group Initialization
BBU_TEXT=Battery Backup Unit
LABEL_LDNAME_TEXT=(N)ame:
STATUS_LOG_SERVER=Displaying log from server
LDRIVE_OPERATION_2_DESC=Identifies virtual disk members by blinking the associated physical disk(s) activity LED
PROPERTY_CURWRITEPOLICY_TEXT=Current Write Policy
MSG_DELARRAY_ILLEGAL=Cannot delete new Array: Illegal Configuration Exception!
LABEL_DOMAIN_ADDR=Connect to (r)emote server at IP address:
MSG_INVALID_LDOPTION=cannot create Virtual Disk: Invalid input parameters for creating Virtual Disk!
NEWLD_PROPERTY_INPUT=Virtual Disk Properties
PROPERTY_ISCLUSTERACTIVE_TEXT=Cluster Active
LOGGERHEADER_DESCRIPTION_TEXT=Description
LABEL_OSNAME_TEXT=OS
MENU_FILE_TEXT=(F)ile
FULL_INIT_TEXT=Full Initialization
TEXT_SEC_FRM_REBOOT=seconds from reboot
PROPERTY_No_TEXT=No
PROPERTY_HOSTPORTCOUNT_TEXT=Host Port Count
BBU_TYPE_BBU=BBU
WRITEPOLICY_WRITE_ADAPTIVE=Write Adaptive
ABOUT_SERVERINFO_TEXT=(S)erver Info
LABEL_SELECTLD_TEXT=Select Excluded Virtual Disks:
PROPERTY_LDRIVERL_TEXT=Current RAID Level
MSG_CONFIRM_ADDCFG=<html>This operation will try to configure the controller based on a saved configuration.<br>Unstable conditions might arise due to difference in physical devices in the two configurations.<br>Are you sure ?</html>
ABOUT_HOSTNAME_TEXT=HostName
MENU_LOGCLEAR_TEXT=(C)lear Log
HEALTHY_SERVER=Healthy
ACCESS_READ_WRITE=Read Write
PHDRIVE_OPERATION_13_DESC=Removes the hotspare assignment and changes the drive state to UNCONFIGURED GOOD
ADAPTER_OPERATION_1_DESC=Sets controller alarm to on to alert user when the controller
MENU_HELP_TEXT=(H)elp
PROPERTY_REVLEVEL_TEXT=Revision Level
PD_CACHE_DISABLE=Disable
BUTTON_AUTOCONF_TEXT=(A)uto Configuration
SERVERINFO_LABEL_TEXT=Server Information
LABEL_REDUNDANCY_GROUP=Redundancy
PROPERTY_HOSTOSARCH_TEXT=OS Architecture
LDRIVE_STATE_PARTDERGRADED=Partially Degraded
MSG_GETRDLEVELSIZE_FAILED=Cannot get possible RAID level and size: Unknown Exception!
MINUTE_TEXT=minute
LABEL_LDSUMMARY_TEXT=(V)irtual Disk Summary
MENU_OPERATION_TEXT=O(p)erations
ACCEPT_ARRAY=A(c)cept
MSG_DELETELD_CONFIRM=Warning: This will delete the Virtual Disk! Are you sure?
LABLE_KERNELVERSION_TEXT=Kernel Version:
PD_STATE_UNCONFBAD=Unconfigured Bad
LDRIVE_OPERATION_3_DESC=Aborts the Locate Virtual Disk operation
PROPERTY_COERCEDSIZE_TEXT=Coerced Size
PHDRIVE_OPERATION_5_DESC=Replaces a drive of a degraded array that is marked missing with an UNCONFIGURED GOOD drive
PROPERTY_REBUILDRATE_TEXT=Rebuild Rate
PROPERTY_HOSTOSVER_TEXT=OS Version
MSG_FATAL_RESCAN_ERROR=Fatal error: rescan failed! Exiting...
PROPERTY_DEVICEPORTADDRESS_TEXT=Device Port Address
DEGRADED_SERVER=Degraded
ENCLOSURE_TEXT=Enclosure
PROPERTY_FWVERSION_TEXT=Firmware Version
LABEL_NUMVIRTUALDISK_TEXT=(V)irtual Disk Count:
MSG_CONFIRM_LOGSAVE_BEFORE_DELETE=Do you want to save the existing log?
OPERATION_RECON_TEXT=Reconstruction
FREQUENCY_TEXT=Execution Fre(q)uency:
LABEL_ESTIMATED_TEXT=Estimated time left:
LABEL_ARRAY_FREE=Arrays with Available Space
MSG_NOCONFIG_POSSIBLE=No new Virtual Disk can be added to the configuration!
LABEL_WITHREDUNDANCY_TEXT=With Redundancy
PROPERTY_MEMUNCORRECTABLEERRORCOUNT_TEXT=UnCorrectable Error Count
MSG_INVALID_DATA=Invalid data sent to driver
MSG_INVALID_OPSTATE=The drive is not in a state to perform
LD_ACCESS_BLOCKED=Blocked
GUIDED_CONFIG_STEP=Finish
MSG_INVALID_IPADDR=Invalid IP Address!
AUTOLEARN_PERIOD_TEXT=Auto Learn Period (sec):
MENU_RECONWIZARD_TEXT=(R)econstruction Wizard
COER_MODE_1GB=1 GB
MSG_FULLACCESS_DENIED=<html>Full Access denied because another user is logged in<br> with full access from IP Address:
MSG_UNKNOWN_ERROR=Operation Failed
OPMODE_MANUAL=Manual
PROPERTY_ALARMENABLE_TEXT=Alarm Enabled
BBU_NEXTLEARN_TIME=Next Learn Time
PHDRIVE_TEXT=Physical Drive
MSG_DATA_BAKUP=It is advisable to backup data before this operation. Are you ready?
ABOUT_OKBUTTON_TEXT=OK
PROPERTY_SASADDR_TEXT=Backend SAS Address
PROPERTY_ISALARMPRESENT_TEXT=Alarm Present
LOGINMODE_TEXT=Login (M)ode:
ADAPTER_OPERATION_2_DESC=Sets the audible controller alarm option to off
PROPERTY_BIOSVERSION_TEXT=BIOS Version
MSG_CONFIRM_LOGDELETE=This will delete the log. Are you sure?
BUTTON_ADDHSP_TEXT=Add HotSpare
CHECKBOX_WITHFIX_TEXT=Automatically Fix errors
LABEL_UNCONF_PDLIST=Unconfigured Physical Drive List
LABEL_NO_EXISTINGARRAY=Do no(t) use Existing Arrays
PROPERTY_WRITEPOLICY_TEXT=Write Policy
MSG_REMOVEHSP_FAILED=Cannot remove hotspare!
MSG_LD_ZERO=Total Number of Virtual Disks must be greater than 0!
PROPERTY_TAB_TEXT=Properties
MENU_ADVANCED_OP=(A)dvanced Operations
MSG_CONN_LOST=Connection to the server has been lost. Do you want to re-login?
LDRIVE_OPERATION_4_DESC=Starts a check consistency operation on the selected virtual disk
PHDRIVE_OPERATION_6_DESC=Marks an offline/failed drive of a degraded array as missing in order to prepare for drive replacement
OPERATION_MODE_TEXT=Operation (M)ode:
MSG_DELPDFROMARRAY_FAILED=Cannot delete Physical Drive from the array!
MSG_RAID0_NOTPOSSIBLE=This RAID level is not possible as there is dedicated hotspare for the specified arrays
RAID_LEVEL_0_DISPLAY_STRING=RAID 0
MSG_ABORTALL_CONFIRM=This will abort all the operations shown above! Are you sure?
MENU_EXIT_TEXT=(E)xit
STATUS_LOG_LOCAL=Displaying log from file
PROPERTY_MEMCORRECTABLEERRORCOUNT_TEXT=Correctable ErrorCount
LABEL_CCRATE_TEXT=Ch(e)ck Consistency Rate
PROPERTY_DEVICEID_TEXT=Device ID
PROPERTY_SLOT_NUMBER=Slot Number
OPERATION_BGI_TEXT=Background Initialize
MANUAL_DRIVE_SELECTION_JTABLE_CAPACITY_COLUMN=Drive Capacity
PROPERTY_PRODUCTINFO_TEXT=Product Info
MENU_GRCHKCONSISTENCY_TEXT=(C)heck Consistency
BGINIT_DISABLE=Disabled
BUTTON_SELECTALL_TEXT=Select (A)ll
MSG_FAIL_SAVE_CONFIG=Save configuration failed
BUTTON_START=(S)tart
LABEL_INITSTATE_TEXT=Init Stat(e):
SERVER_TEXT=Server
MSG_THREAD_CREATE_FAILED=Thread creation failed
PROPERTY_HOSTSTATUS_TEXT=Status
MSG_CMDFAILED_OS=Command failed by Operating System
MENU_LOADPLUGINS_TEXT=Load Plugins
MAX_DRIVE_SELECTION_TEXT=Select Physical Drives
LOGGERHEADER_DATETIME_TEXT=Date / Time
LABEL_RAIDLEVEL_TEXT=RAID (L)evel:
OPERATION_PATROLREAD_TEXT=Patrol Read
MSG_SELECTHOST=Please select a host from the list!
MSG_LINUX_SYSFS_ERROR=An error occurred while accessing sysfs
PROPERTY_DEVICETYPE_TEXT=Device Type
PROPERTY_NO_TEXT=No
PROPERTY_PRODUCTID_TEXT=Product ID
SORTBYCOMBO_IPADDRESS_TEXT=IP Address
PROPERTY_STRIPESIZE_TEXT=Stripe Size
BBU_SERIALNO=Serial No
ADAPTER_OPERATION_3_DESC=Temporarily quiets the controller alarm for the current event
LABEL_SENSORS_TEXT=Sensors:
MSG_ABOUT_LINE2=Copyright \u00a9 2007 LSI Corporation. All Rights Reserved.
RECON_MODE_SEL=Reconstruction Mode
MSG_ABOUT_LINE1=Client Build:
LOGINMODE_FULLACCESS=Full Access
PROP_PDSASADDR_TEXT=SAS Address
LEGEND_UNUSABLE_TEXT=Reserved
PD_CACHE_UNCHANGED=Unchanged
VALUE_NOT_AVAILABLE=Not Available
PHDRIVE_OPERATION_13=Remove H(o)tspare
PHDRIVE_OPERATION_12=Make D(e)dicated Hotspare
MSG_INIT_NOT_DONE=Storelib Initialization not completed
PHDRIVE_OPERATION_11=Make Glo(b)al Hotspare
MSG_INVALID_CMD=Invalid Operation
PHDRIVE_OPERATION_10=Stop Locating Physical (D)rive
MSG_INVALID_FLASH_IMAGE=The firmware flash image is invalid
MSG_RECON_NOTALLOWED=Reconstruction on this Volume is not allowed!
BBU_FULL_CAPACITY=Full Capacity
MSG_NO_CONNECTION=Fatal Error: Cannot connect to Framework!
LDRIVE_OPERATION_5_DESC=Cancels the current check consistency operation on the selected virtual disk
OPMODE_DISABLED=Disabled
MSG_CONFIG_CORRUPTED=Configuration Corrupted!
PHDRIVE_OPERATION_7_DESC=This option will start rebuild on selected offline/failed drive
BUTTON_CLEAR_CONFIG=Cl(e)ar Configuration
LOGGERHEADER_ERRORLEVEL_TEXT=Error Level
PROPERTY_MEMORYSIZE_TEXT=Memory Size
VOLUME_CANDIDATE_PANEL_REMOVE=Remove
ACCESS_READ_ONLY=Read Only
ADAPTER_TYPE_SAS_3G=SAS_3G
PROPERTY_IOPOLICY_TEXT=IO Polic(y)
PROPERTY_READPOLICY_TEXT=Read Policy
MANUAL_DRIVE_SELECTION_JTABLE__DEVID_COLUMN=Device ID
MSG_CLEAR_FOREIGN_FAILED=Clear Foreign Config failed!
PROPERTY_DISKCACHEPOLICY_TEXT=Disk Cache Policy
PROP_SCSIDEVTYPE_TEXT=SCSI Device Type
WRITE_BACK =Always Write Back
WRITE_BACK_WITH_BBU = Write Back with BBU
RAID_LEVEL_TEXT=RAID
PROPERTY_RAIDLEVEL_TEXT=RAID Level
LABEL_STATE_TEXT=State:
BBU_OPERATION_LEARN=Learn
PROPERTY_COERCIONMODE_TEXT=Coercion Mode
BBU_DESIGN_VOLTAGE=Design Voltage
LDRIVE_STATE_DEGRADED=Degraded
SORTBYCOMBO_OS_TEXT=OS
RECON_ADD_BUTTON_TEXT=ADD
NEWLD_TEXT=New Virtual Disks
MSG_LINUX_SYSFS_NOTMOUNTED=sysfs is not mounted in the system
COER_MODE_NONE=None
LD_ACCESS_RDWRITE=Read Write
ACCESS_BLOCKED=Blocked
LABEL_FAN_TEXT=Fan
MSG_NO_MORE_VD=No more virtual disk can be added
MSG_IMPORT_FOREIGNCFG_SUCCESS=Foreign Configuration was imported successfully!
MSG_NOLD_POSSIBLE=Please Create at least one array then go to next step!
PROPERTY_HOSTOS_TEXT=Operating System
MSG_NOSERVER_FOUND=No Servers found!
MENU_LOGREMOTE_TEXT=Revert to Current Log
PROPERTY_PATROLREADRATE_TEXT=Patrol Read Rate
ADAPTER_OPERATION_4_DESC=Updates controller firmware with a specified firmware image
BUTTON_ACCEPT_TEXT=Accep(t)
MSG_NOASSISTED_POSSIBLE=No configuration possible for the given parameters!
PROPERTY_CCRATE_TEXT=Consistency Check Rate
LDRIVE_TEXT=Virtual Disk
IOPOLICY_DIRECT=Direct IO
RAID_TEXT=RAID
TEXT_GUID=GUID
TEXT_CONFIGURATION=Configuration
MSG_SAVELOG_INVALIDFILE=Cannot save to the file specified! Device not ready!
BUTTON_NEXT_TEXT=(N)ext
OPERATION_FGI_TEXT=Foreground Initialize
OPMODE_AUTO=Auto
BUTTON_DESELECTALL_TEXT=(D)eselect All
STATUS_LOG_FILE_ERROR=No Valid Log found in
LDRIVE_OPERATION_6_DESC=Starts an initialization operation on the selected virtual disk
MSG_ILLEGAL_CONFIG=Cannot create new Array: Illegal Configuration Exception!
PHDRIVE_OPERATION_8_DESC=Cancels the current rebuild operation on a physical drive
PROPERTY_PDTYPE_TEXT=Physical Drive Type
MSG_MAXLDNUM_EXCEEDED=Total number of Virtual Disks must not exceed
MSG_SELCCLDRIVE_TEXT=Select Virtual Disks:
OPERATION_REBUILD_TEXT=Rebuild
NEW_ARRAY_TEXT=New Array
OPERATIONS_TAB_TEXT=Operations
PROPERTY_VENDORID_TEXT=Vendor ID
MSG_CONFIG_NOTALLOWED=Configuration on this adapter is not allowed!
ABOUT_OSARCHI_TEXT=Operating System Architecture
MSG_UNKNOWN=Unknown Exception!
GRP_CONCHECK_TITLE=Group Consistency Check
LABEL_RAID_TEXT=RAID
BBU_RUNTIMEEMPTY_CAPACITY=Run time to Empty
MSG_STATUS_MANUALVDCREATE=<html>Check one or more Array holes from the top left panel, change the various properties and press accept
MSG_INVALID_INPUT=Invalid input specified!
BUTTON_MODIFY_TEXT=(M)odify
PASSWORD_TEXT=(P)assword:
SERVERS_BUTTON_TEXT=(S)ervers
LABEL_PATROLREADRATE_TEXT=Patrol (R)ate
ABOUT_IPADDRESS_TEXT=IP Address
READ_AHEAD_ADAPTIVE=Adaptive Read Ahead
BBU_OPERATION_SLEEP_DESC=Sets the BBU to low power storage mode
BBU_REM_CAPACITY=Remaining Capacity
ARRAY_WITH_HOLES=Arrays with Free Space
PROPERTY_BIOSBUILDTIME_TEXT=BIOS Build Time
MODE_SEL_STEP=Mode (S)election
MODE_SEL_STEP_1=Mode Selection
MSG_IMPORT_FOREIGNCFG_FAILED=Import foreign configuration failed!
LABEL_REDUNDANCY_TRY=Redundancy when (p)ossible
ADAPTER_OPERATION_5_DESC=Sets patrol read options for configured physical drives
BBU_VOLTAGE_STATUS=Voltage
BUTTON_OPERATION_GO=G(o)
MSG_NOT_RESPONDING=Framework not responding!
MENU_GRPROGRESS_TEXT=Show (P)rogress
MENU_FOREIGN_CONFIG=Scan For (F)oreign Configuration
MSG_CANNOT_ABORT=Cannot be aborted!
MSG_MEMALOC_FAILED=Failed to allocate memory
WRITE_THROUGH=Write Through
DISK_CACHE_ENABLED=Enabled
LABEL_TEMPERATURE_TEXT=Temperature
MSG_MAXEVENT_EXCEEDED=The maximum number of events that can be retrieved has exceeded
BBU_OPERATION_SETPROP=Set BBU Properties
LDRIVE_OPERATION_7_DESC=Cancels the current initialization operation on the selected virtual disk
PHDRIVE_OPERATION_9_DESC=Identifies a physical disk by blinking the associated physical disk activity LED
BUTTON_CANCEL_TEXT=Cancel
MSG_MAXCONFIG_EXCEEDED=Max Configuration limit exceeded!
ADAPTER_TYPE_ISCSI=Unknown
MENU_RESCAN_TEXT=(R)escan
BUTTON_MANUALCONF_TEXT=(M)anual Configuration
LABEL_SENSOR_TEXT=Sensor
TEXT_ARRAY_ROW=Row Index
MENU_PLUGINS_TEXT=Plugins
BUTTON_ABORTALL_TEXT=Abort All[A]
ENCL_ELEMSTATUS_OK=OK
BUTTON_LOGIN_TEXT=(L)ogin
USERNAME_TEXT=(U)ser Name:
HOLE_TEXT=Hole
MSG_BIG_LDNAME=Virtual Disk Name is too big!
MENU_GROUPOPERATION_TEXT=(G)roup Operations
BUTTON_CLOSE_TEXT=Close[C]
PROPERTY_SERIALNO_TEXT=Serial No
LOGINMODE_VIEWONLY=View Only
PROPERTY_LDSTATE_TEXT=Virtual Disk State
PROPERTY_MEDIACOUNT_TEXT=Media Error Count
PROPERTY_DISKWRITECACHEDISABLE_TEXT=Disk Write Cache Disable
LDRIVE_STATE_OPTIMAL=Optimal
MSG_LDDELETE_DATA_LOST=Data contained in the virtual drive will be lost. Do you want to continue?
DEV_TAPE_TEXT=TAPE
PDTYPE_SCSI=SCSI
MSG_ADDHOTSPARE_FAILURE=Cannot add Hotspare to the array!
LABEL_BACKGROUNDINIT_TEXT=Background Ini(t)ialization:
CHECKBOX_FASTINIT_TEXT=Fast Initiali(z)ation
PROPERTY_BGIRATE_TEXT=BGI Rate
MSG_CONFIRM_CFGOVERWRITE=This will overwrite the existing configuration. Are you sure?
MANUAL_MODE_LOGICALDRIVE=V(i)rtual Disk Creation
MANUAL_MODE_LOGICALDRIVE_1=Virtual Disk Creation
BUTTON_REMOVEHSP_TEXT=Remove HotSpa(r)e
PROPERTY_HOSTPORTADDRESS_TEXT=Host Port Address
MENU_HELPME_TEXT=(H)elp
UNUSED_ARRAYS_TEXT=Unused Arrays
LABEL_PATROL_CONTINUOUS=(C)ontinuous Patrolling
BBU_CURRENT_STATUS=Current
SELECT_RAID_LEVEL_TEXT=New (R)AID Level
BBU_RELCHARGE_STATE=Relative State of Charge
PROPERTY_LDFAILEDCOUNT_TEXT=Failed Virtual Disk Count
MSG_NO_OP_SELCTED=Please select an operation !
ADAPTER_OPERATION_6_DESC=Starts patrol read operation on the selected physical drives
LABEL_VOLUMENAME_TEXT=Volume (N)ame :
ARRAY_TEXT=Array
MSG_LDINIT_DATA_LOST=Initialization will result in data loss on the selected Virtual Disk(s). Proceed ?
PROPERTY_LDRIVENAME_TEXT=Name
MSG_FAIL_ADD_CONFIG=Add configuration failed
MENU_ABOUT_TEXT=(A)bout
MSG_NOMORE_ARRAY=No more array can be created : Maximum Number is :
OPERATION_CLEAR_TEXT=Clear
ENCL_ELEMSTATUS_NOT_AVAILABLE=Not Available
OPERATION_CC_TEXT=Check Consistency
LDRIVE_OPERATION_8_DESC=Defines virtual disk operation parameters
PROPERTY_FANNUMBER_TEXT=Number of Fans
ADAPTER_OPERATION_8=Set Adjustable Tas(k) Rates
PROPERTY_HOSTIP_TEXT=IP Address
ADAPTER_OPERATION_7=S(t)op Patrol Read
PORT_TEXT=Port
ADAPTER_OPERATION_6=Start Patrol R(e)ad
MSG_DELARRAY_FAILED=Cannot delete new Array: Unknown Exception!
ADAPTER_OPERATION_5=Set Patrol (R)ead Properties
ADAPTER_OPERATION_4=Fl(a)sh Firmware
ADAPTER_OPERATION_3=S(i)lence Alarm
VERSIONINFO_LABEL_TEXT=Version Information
ADAPTER_OPERATION_2=(D)isable Alarm
MSG_STATUS_MODESEL=Select one of the modes of configuration
ADAPTER_OPERATION_1=E(n)able Alarm
ENCL_ELEMSTATUS_CRITICAL=Critical
MSG_PDPROGRESS_TEXT=Ongoing Operations on Physical Drives
PHYSICAL_TAB_TEXT=Physical
MSG_ARRAYCREATIONIR_FAILED=Cannot create new Array: At least 2 physical drives needed!
PROPERTY_NVRAMSIZE_TEXT=NVRAM Size
MSG_MAXPDINARRAY_EXCEEDED=No more Physical Drive can be added to this array: Maximum Number is:
LABEL_DISKCACHEPOLICY_TEXT=Dis(k) Cache Policy:
PROPERTY_PRODUCTNAME_TEXT=Product Name
HOUR_TEXT=hour
LABEL_SORTBY_TEXT=(S)ort By
AVAILABLE_DRIVES_TEXT=(A)vailable Drives
LABEL_IPADDRESS_TEXT=IP Address
LABEL_SIZE_TEXT=Si(z)e:
SELARRAY_DEDICATEDHSP_TEXT=Select arrays
LABEL_RECONRATE_TEXT=Reconstru(c)tion Rate
BBU_CYCLE_COUNT=Cycle Count
BUTTON_BACK_TEXT=(B)ack
IBBU_TEXT=IBBU
DEV_CDROM_TEXT=CDROM
DEV_OPTICAL_DRIVE_TEXT=Optical Drive
MSG_DEVNOT_RESPONDING=Device not responding!
HOTSPARE_TEXT=HotSpare Physical Drive
MSG_STATUS_AUTOCONFIG=Select modify to make desired changes to auto configuration parameters or Select Finish to complete Auto Configuration Wizard.
MSG_LINUX_SCSIMAP_FAILED=The SCSI device to SCSI address mapping failed
BBU_AUTOLEARN_PERIOD=Auto Learn Period
MSG_DELETLD_FAILED=Cannot delete newly created Virtual Disk: Unknown Exception!
MSG_PDREMOVEHSP_CONFIRM=Warning: This will remove the hotspare drive! Are you sure?
MSG_MUTEX_CREATE_FAILED=Mutex creation failed
MSG_NOADMIN_RIGHT=This user does not have Administrator right for this system!
PD_STATE_ONLINE=Online
LABEL_VOLUMEID_TEXT=Volume I(D):
LABEL_REBUILDRATE_TEXT=Reb(u)ild Rate
PROPERTY_LDONLINECOUNT_TEXT=Online Virtual Disk Count
PHDRIVE_OPERATION_9=Lo(c)ate Physical Drive
PHDRIVE_OPERATION_8=(A)bort Rebuild
PHDRIVE_OPERATION_7=(R)ebuild
PHDRIVE_OPERATION_6=Mark Physical Drive as (M)issing
COMBO_SELECTLDRIVE_TEXT=-- Select Virtual Disk (VD) --
PHDRIVE_OPERATION_5=Replace M(i)ssing Drive
PHDRIVE_OPERATION_4=S(t)op Patrol Read
PHDRIVE_OPERATION_3=Start Patrol R(e)ad
PHDRIVE_OPERATION_2=(M)ake Drive Offline
PHDRIVE_OPERATION_1=Make Drive O(n)line
PHDRIVE_OPERATION_16=Disable Write Cache
PHDRIVE_OPERATION_17=Enable Write Cache
ADAPTER_OPERATION_7_DESC=Stops the current patrol read operation
MSG_NOMORE_ARRAY_INONESHOT=No additional arrays may be created in this configuration.
LABEL_FILETYPE_ROM=ROM Files (*.rom)
POSTPONELEARN_DELAY_TEXT=Postpone Learn Delay Interval (hours):
MSG_CONFIG_OS_DRIVE_PRESENT=This configuration contains at least one OS drive. Configuration cannot be cleared.
MSG_OS_LD=This is an OS drive. This virtual drive cannot be deleted.
PROPERTY_ENCLOSURE_TYPE_TEXT=Enclosure Type
PROPERTY_ENCLOSURE_TYPE_VIRTUAL=Virtual
MSG_NEW_VERSION=and the new version is
MENU_ADD_CONFIG=(A)dd Configuration from file
MENU_SAVE_CONFIG=Sa(v)e Configuration to file
MENU_CLEAR_CONFIG=Clear Configura(t)ion
OPERATION_SELECTION_TEXT=Selected Operation :
OPERATION_DESC_TEXT=Description :
LDRIVE_OPERATION_1=(D)elete Virtual Disk
LDRIVE_OPERATION_2=Locate (V)irtual Disk
LDRIVE_OPERATION_3=Stop Locating Virtual Dis(k)
MSG_RECONS_ERR_UNKNOWN=Reconstruction failed : Unknown error
MSG_PD_TYPE_WRONG=Configuration is not possible with SAS/SATA mixed drives
MSG_SAS_SATA_MIX_NOT_ALLOWED=Configuration is not possible with SAS/SATA mixed drives. Please select same types of drive to add into this array.
TXT_DAYS= Days
RECON_DRIVE_ADD_MESSAGE=<HTML>Select drive(s) that you want to add to the volume.<BR>You may select a maximum of {0,number} drives</HTML>
RECON_DRIVE_REMOVE_MESSAGE=<HTML>Select drive that you want to remove to the volume.<BR>You may select a maximum of {0,number} drive</HTML>
MSG_CLEARCONFIG_CONFIRM=Clearing the configuration will destroy virtual disks and result in data loss on the selected controller. Proceed ?
QUICK_INIT_TEXT=Fast Initialization
NO_INIT_TEXT=No Initialization
MSG_CONFIRM_LDRECLAIM=This will delete the newly created Virtual Disk! Are you sure?
AUTOLEARN_MODE_TEXT=Auto Learn Mode:
AUTO_LEARN_WARN=Warn
AUTO_LEARN_MODE=Auto Learn Mode
TXT_PROGRESS_HRS= Hrs
TXT_PROGRESS_MIN= Min
TXT_PROGRESS_SEC= Sec
ZCR_LEGACY_TEXT=ZCR Legacy
MSG_WRITE_BACK_WARN=Write-through is recommended for maximum data integrity when no battery is present !
MSG_COMPONENT_NOT_RUNNING_ERROR=Error : One or more target component is not running.
MSG_CONFIGURATOR_NOT_RESPONDING_ERROR=Error : Configurator not responding.
MSG_CONFIGURATOR_INVALID_OPERATION_ERROR=Error : Invalid operation.
MSG_CONFIGURATOR_OPERATION_FAILED_ERROR=Error : Operation failed.
MSG_CONFIGURATOR_EXCEPTION_ERROR=Error : Unknown exception.
BUTTON_YES_TEXT=(Y)es
BUTTON_NO_TEXT=(N)o
CONFIRM_TEXT=(C)onfirm
SPLASH_MSG_GUI_STARTING=Starting Vivaldi GUI...
SPLASH_MSG_CONNECT_FRAMEWORK=Connecting Server
SPLASH_MSG_LOADING_PLUGIN=Loading
SPLASH_MSG_ADAPTER_FOUND=Scanning Adapter...
SPLASH_MSG_LOGIN_FULL_ACCESS_REQUEST=Logging in with 'Full Access' mode...
SPLASH_SCREEN_LOGIN_VIEW_ONLY_REQUEST=Logging in with 'View Only' mode...
SERVERIP_TEXT=Server :
AUTOCONF_DESC_TEXT=Auto configuration is the quickest and simplest way to create a new storage configuration. Selecting this mode, the Configuration Wizard creates the best possible using the available physical disks with minimum user interactions.
MANUALCONF_DESC_TEXT=Manual Configuration provides a fully flexible way create a new storage configuration. This is specially designed for advanced user with in-depth knowledge of storage configuration. Selecting this mode, the Configuration Wizard will let the user to create desired configuration with available disk drives.
GUIDEDCONF_DESC_TEXT=Guided Configuration provides an easy way to create a new storage configuration. Based on the information that is provided during different steps, the Configuration Wizard uses the available disk drives to create an optimal storage configuration.
BUTTON_SELECTPRIMARYDISK_TEXT=Change Primary Disk
MSG_ERR_PRIMARY_DISK_CHANGE=Failed to change Primary Disk !
TITLE_SELECT_PRIMARY_DISK=Select Primary Disk
BUTTON_SELECTPRIMARYDISK_TEXT=Change Primary Disk
MSG_SELECT_PRIMARY_DISK=Please select one disk as Primary Disk !
MENU_TOOLS_TEXT=(T)ools
MENU_CONFIGURE_TEXT=(C)onfigure
PROPERTY_FWPKGVERSION_TEXT=Firmware Package Version
MSG_OS_LD_INIT=This is an OS drive. This virtual drive cannot be initialized.
VD_WR_POLICY_BAD_BBU=(U)se Write Through for failed or missing battery
ENCLOSURE_ID_TEXT=ID
LOGGERHEADER_SEQUENCENO_TEXT=ID
MSG_APP_DEGRADE=Incompatible Controller. Old firmware is being used.
MSG_APP_UPGRADE=Application needs to be upgraded to support this controller.
PROPERTY_MUXSETTING_TEXT=MUX Setting : Quad
PROPERTY_MUXMODE_AUTO_TEXT=Auto
PROPERTY_MUXMODE_EXT_TEXT=External
PROPERTY_MUXMODE_INT_TEXT=Internal
MSG_WARNING_DIALOG=Do you want to close the window ?
RECON_CHANGE_RAID_TEXT=Change RAID Level provides a way to reconstruct the existing storage configuration. No drive additions or deletions are required from the existing configuration. This has been done by changing the RAID Level only.
RECON_DELETE_TEXT=Remove drive provides a way to reconstruct the existing storage configuration. This has been by removing physical drives from the configuration.
RECON_INSERT_TEXT=Add drive provides a way to reconstruct the existing storage configuration by adding new physical drives.
PROPERTY_ENCLPOSITION_TEXT=Enclosure Position
PROPERTY_ENCLCONNINDEX_TEXT=Enclosure Connector Index
TITLE_SELECT_HOTSPARE_AFFINITY=Select affinity option
MSG_SELECT_AFFINITY_OPTION=Please select affinity option !
MSG_NO_AFFINITY_OPTION=(N)o Affinity
MSG_WITH_AFFINITY_OPTION=(W)ith Affinity
BADBBU_PRE=Yes
BADBBU_ABS=No
PROPERTY_BADBBUPOLICY_TEXT=Write Through for failed/missing battery
PD_STATE_HOTSPARE_DEDICATED=Dedicated
PD_STATE_HOTSPARE_GLOBAL=Global
PD_STATE_HOTSPARE_AFFINITY=Affinity
MSG_MAX_LEARN_DELAY_EXCEEDED=Postpone Learn Delay Interval must not be greater than 7 Days !
WRITEPOLICY_WRITE_CACHE=Write Cache
EXPANDER_TEXT=Expander
RAID_LEVEL_6_DISPLAY_STRING=RAID 6
RAID_LEVEL_4_DISPLAY_STRING=RAID 4
LD_STRIPE_SIZE_512=512 Byte
LD_STRIPE_SIZE_1K=1 KB
LD_STRIPE_SIZE_2K=2 KB
LD_STRIPE_SIZE_4K=4 KB
LD_STRIPE_SIZE_8K=8 KB
LD_STRIPE_SIZE_16K=16 KB
LD_STRIPE_SIZE_32K=32 KB
LD_STRIPE_SIZE_64K=64 KB
LD_STRIPE_SIZE_128K=128 KB
LD_STRIPE_SIZE_256K=256 KB
LD_STRIPE_SIZE_512K=512 KB
LD_STRIPE_SIZE_1M=1 MB
LD_STRIPE_SIZE_2M=2 MB
LD_STRIPE_SIZE_4M=4 MB
MSG_RESOLUTION_NOT_SUPPORTED=System resolution not supported !
MSG_CLEAR_FOREIGN_CONFIG_SUCCESS=Foreign Configuration Cleared Successfully !
MSG_CLEAR_FOREIGNCFG_SUCCESS_RESCAN=<html>Foreign Configuration was cleared successfully.<br>More foreign configurations were detected.<br>Would you like to re-scan for foreign configurations?<br><br></html>
MSG_IMPORT_FOREIGNCFG_SUCCESS_RESCAN=<html>Foreign Configuration was imported successfully.<br>More foreign configurations were detected.<br>Would you like to re-scan for foreign configurations?<br><br></html>
MSG_LDINIT_REFRSH_VD=VD list is not updated! Do you want to update?
MSG_MAX_SELECTED_ARRAYS=Dedicated Hotspare can't be created for more than 16 arrays !
MSG_TXTLOGFILE_HEADER= Event Log - Generated on
MSG_TXTFILE_ID=ID =
MSG_TXTFILE_SEQNUM=SEQUENCE NUMBER =
MSG_TXTFILE_TIME=TIME =
MSG_TXTFILE_LOCALIZEDMSG=LOCALIZED MESSAGE =
MENU_LOGSAVE_TEXT_FORMAT=S(a)ve Log Text
MSG_EXECUTION_FRE_NOZERO_VAL=Execution frequency can't be zero second!
FREQUENCY_TEXT_HOUR=Hour
FREQUENCY_TEXT_MINUTE=Minute
FREQUENCY_TEXT_SEC=Second
ITBBU_TEXT=ITBBU
PROPERTY_ENCLCONNNAME_TEXT=Enclosure Connector Name
PROPERTY_NVDATA_VERSION_TEXT=NVDATA Version
MSG_LOGIN_FAILURE_THRICE=<html>You have exceeded the maximum number of login attempts. <br> Please contact the administrator.
ADAPTER_OPERATION_12=Consistency (C)heck Settings
MSG_CC_ON_ERROR=Stop Consistency Check on Error
MSG_CC_FIX_ERROR=Continue Consistency Check and Fix Errors
ADAPTER_OPERATION_12_DESC=Specify how the consistency check operation should behave when an error is encountered.
PROPERTY_PRODREVLEVEL_TEXT=Product Revision Level
LABEL_SELECT_FILE_TEXT=F(i)le
LABEL_SELECT_VIRTUAL_DISK_TEXT=S(e)lect Virtual Disk
LABEL_ARRAY_TEXT=Available A(r)rays
LABEL_HOTSPARE_TEXT=(H)ot Spare
BUTTON_ADD_TEXT=A(d)d
BUTTON_REMOVE_TEXT=Remo(v)e
VDC_LABEL_READPOLICY_TEXT=Read Polic(y) :
VDC_VD_WR_POLICY_BAD_BBU=Use Write Throu(g)h for failed or missing battery
LABEL_IOPOLICY_TEXT=IO P(o)licy
VDC_LABEL_ACCESSPOLICY_TEXT=A(c)cess Policy :
GUIDED_LABEL_STRIPESIZE_TEXT=(S)tripe Size:
GUIDED_LABEL_READPOLICY_TEXT=(R)ead Policy :
GUIDED_VD_WR_POLICY_BAD_BBU=Use Write (T)hrough for failed or missing battery
GUIDED_LABEL_IOPOLICY_TEXT=I(O) Policy
GUIDED_LABEL_ACCESSPOLICY_TEXT=Access (P)olicy :
GUIDED_LABEL_DISKCACHEPOLICY_TEXT=Disk Cache Polic(y) :
GUIDED_LABEL_INITSTATE_TEXT=Init St(a)te :
BUTTON_CLOSE=Cancel
GRPINIT_CHECKBOX_FASTINIT_TEXT=(F)ast Initialization
LABEL_DRIVES=Unconfig(u)red Drives
VDC_LABEL_ARRAY_TEXT=A(r)rays
RECON_PROPERTY_LDRIVENAME_TEXT=(N)ame
RECON_PROPERTY_IOPOLICY_TEXT=IO Policy
LABEL_NEWVIRTUALDISK_TEXT=New Virt(u)al Disk
LABEL_HEALTH_TEXT=Health
LABEL_SERVER_TEXT=Ser(v)ers
PROPERTY_IOPOLICY_TEXT_2= IO Policy
LABEL_FOREIGN_STATE_TEXT=Foreign
FOREIGN_CONFIG_MAX_LIMIT_EXIT_MSG=<html>The number of foreign configurations detected exceeds the number that can be displayed.<br> Import or clear the configurations that are displayed <br>and then scan for foreign configurations again.</html>
LABEL_FILETYPE_FWFLASH=Firmware Flash Files(*.rom,*.fw)
NOIMPORTABLE_VD_MSG_1=Cannot import virtual disk:\nOne or more drives are missing.\nInsert the missing drive(s) and re-scan.
NOIMPORTABLE_VD_MSG_2=Cannot import virtual disk:\nOne or more spans are missing.\nInsert the missing drive(s) and re-scan.
NOIMPORTABLE_VD_MSG_3=Cannot import virtual disk:\nExceeded number of virtual drives allowed.\nRemove some of the existing virtual disks and re-scan.
NOIMPORTABLE_VD_MSG_4=Cannot import virtual disk:\nUnsupported Configuration. Clear the configuration \nor return the drive(s) to the original controller.
NOIMPORTABLE_VD_MSG_5=Cannot import virtual disk:\nOutdated drive data. Insert the missing drive(s) and re-scan.
NOIMPORTABLE_VD_MSG_6=Import warning: \nPossible outdated drive data.\nInsert the missing drive before importing the configuration.\nImporting the virtual disk without the missing drive may result in data loss.
NOIMPORTABLE_VD_MSG_7=Cannot import physical drive: Configuration conflict. The drive’s place may have been taken by another drive,\nit could be part of another configuration, or the drive’s configuration may be incompatible.\nIm,port or clear any other configurations that exist \nand then re-scan or return the drive to the original controller.
NOIMPORTABLE_VD_MSG_8=Cannot import virtual disk: One or more drives are orphan. Insert the missing drive(s) and re-scan.
NOIMPORTABLE_VD_MSG_9=Cannot import virtual disk: R1E is not supported on this controller.
FOREIGN_CFG_GUID_COMBO_LABEL=Select Confi(g)uration
FOREIGN_CFG_GUID_TREE_LABEL=Configuration (P)review
BUTTON_CLEAR_CONFIG=Clea(r)
BUTTON_IMPORT_CONFIG=I(m)port
BUTTON_CANCEL_FOREIGN_CONFIG=(C)lose
MSG_FOREIGN_DESC_TEXT=Details
MSG_CLEAR_FOREIGN_CONFIG=<html>This operation will remove the selected foreign configuration.<br> Are you sure you want to continue?</html>
MSG_IMPORT_FOREIGN_CONFIG=<html>This operation cannot be reversed after it is started.<br>Are you sure you want to import the configuration?</html>
FOREIGN_MSG_REBUILD_PENDING=Rebuild Pending
ADAPTER_OPERATION_11=(S)chedule Consistency Check
ADAPTER_OPERATION_11_DESC=Establish schedule for consistency check operation.
CTRL_OP_CC_RUN_TEXT=Run (c)onsistency check:
CTRL_OP_CC_OPTION_HOURLY=Hourly
CTRL_OP_CC_OPTION_DAILY=Daily
CTRL_OP_CC_OPTION_WEEKLY=Weekly
CTRL_OP_CC_OPTION_MONTHLY=Monthly
CTRL_OP_CC_OPTION_DISABLE=Disable
CTRL_OP_CC_RUN_CONTINUOUS_TEXT=R(u)n consistency check continuously
CTRL_OP_CC_START_DATE_TEXT=Sta(r)t on:
MONTH_JANUARY_TEXT=January
MONTH_FEBRUARY_TEXT=February
MONTH_MARCH_TEXT=March
MONTH_APRIL_TEXT=April
MONTH_MAY_TEXT=May
MONTH_JUNE_TEXT=June
MONTH_JULY_TEXT=July
MONTH_AUGUST_TEXT=August
MONTH_SEPTEMBER_TEXT=September
MONTH_OCTOBER_TEXT=October
MONTH_NOVEMBER_TEXT=November
MONTH_DECEMBER_TEXT=December
CTRL_OP_CC_START_TIME_TEXT=Start ti(m)e:
TIME_AM_TEXT=AM
TIME_PM_TEXT=PM
TEXT_NOT_AVAILABLE=Not available
MSG_EXTERNAL_LUNCH_TIMEOUT=Login failed : Due to timeout!
MSG_LDCC_NOT_INIT=<html>The virtual disk has not been initialized. Running a consistency check may result in<br> inconsistent messages in the log. Are you sure you want to continue?<html>
MSG_WRITE_CACHE_ENABLE_WARNING=<html>You have elected to enable caching for the virtual disk. Data may<br>be lost or corrupted in the event of a sudden power lost when<br>caching is enabled on a volume with mirroring properties.<br>Are you sure you want to enable caching?</html>
MSG_MAX_LEARN_DELAY_INVALID_NUMBER=Invalid Postpone Learn Delay Interval. Postpone Learn Delay Interval cannot be negative or Zero.
MSG_MAX_LEARN_DELAY_CONTAINS_NON_NUMERIC_VALUES=Invalid Postpone Learn Delay Interval. Postpone Learn Delay value cannot contain non numeric characters.
ABOUT_OKBUTTON_TEXT_DSC=OK
BUTTON_OPERATION_GO_DSC=Go
BUTTON_BROWSE_TEXT_DSC=Browse
LOGINMODE_DSC=Mode
ARRAY_LIST_DSC=Array List
PHYSICAL_DRIVE_DSC=PHYSICAL DRIVE
AUTOLEARN_MODE_DSC=Auto Learn Mode
OPMODE_DSC=Operation Mode
READ_POLICY_DSC=Read Policy
ACCESS_POLICY_DSC=Access Policy
DISKCACHE_POLICY_DSC=Disk Cache Policy
IO_POLICY_DSC=IO Policy
BACK_GROUNDINIT_DSC=Background Initialization
CTRL_OP_CC_OPTION_DSC=Consistency Check Opertaion Mode
LOGICAL_DRIVE_DSC=Logical Drive
BUTTON_SELECTALL_DSC=Select All
BUTTON_DESELECTALL_DSC=Deselect All
BUTTON_CC_START_DSC=Consistency Check Start
BUTTON_CLOSE_DSC=Close Consistency Check Operation
BUTTON_CLOSE_DSC_1=Close Intialization Operation
BUTTON_CLOSE_DSC_2=Close progress window
GRPINIT_CHECKBOX_FASTINIT_DSC=Fast Initialization
BUTTON_INIT_START_DSC=Intialization Start
CHECKBOX_FASTINIT_DSC=Fast Initialization
CHECKBOX_PATROL_CONTINUOUS_DCS=Continuous Patrolling
CHECKBOX_DOMAIN_ADDR_DSC=Remote server at IP address"
CHECKBOX_BAD_BBU_DSC=Bttary Backup Unit
CHECKBOX_CC_RUN_CONTINUOUS_DSC=consistency check continuously
ABOUT_SERVERINFO_DSC=Server Info
BUTTON_ABORTALL_DSC=Abort All
BUTTON_UPDATE_DSC=Update
BUTTON_CONNECT_DSC=Connect
BUTTON_CANCEL_DSC=Cancel
MAXPD_COUNT_DSC=Maximum PD Count for patrolling
LABEL_SELECTLD_DSC=Select Excluded Virtual Disks
FREQUENCY_HOUR_DSC=Execution Frequency Hours
FREQUENCY_MIN_DSC=Execution Frequency Minutes
FREQUENCY_SEC_DSC=Execution Frequency Seconds
REBUIL_DRATE_DSC=Rebuild Rate
PATROL_READRATE_DSC=Patrol Rate
BGI_RATE_DSC=BGI Rate
CC_RATE_DSC=Check Consistency Rate
RECON_RATE_DSC=Reconstruction Rate
USER_NAME_DSC=Enter Host User Name
PASSWORD_DSC=Enter Host Password
FILE_NAME_DSC=Enter Or Select File Name
POSTPONELEARN_DELAY_DSC
LD_NAME_DSC=Logical Drive Name
SERVER_SORT_DSC=Server Sorting
HOTSPEAR_ARRAY_DSC=Hotspear Array
INIT_STATE_DSC=Intialization Stage
AUTO_MODE_DSC=Auto Mode
STRIPE_SIZE_DSC=Stripe Size
READ_POLICY_DSC=Read Policy
DISK_CACHEPOLICY_DSC=Disk Cache Policy
WRITE_POLICY_DSC=Write Policy
CACHE_POLICY_DSC=Cache Policy
ACCESSPOLICY_DSC=Access Policy
INITSTATE_DSC=Initialization State
BBU_DSC=Battary Backup Unit Check
ARRAYCMB_DSC=Array Combination
RAID_LEVEL_DSC=RAID Level
BUTTON_ADD_DSC=Add
BUTTON_REMOVE_DSC=Remove
ACCEPT_ARRAY_DSC=Accept
BUTTON_REMOVEHSP_DSC=Remove HotSpare
BUTTON_MODIFY_DSC=Modify
BUTTON_ACCEPT_DSC=Accept
BUTTON_SELECTPRIMARYDISK_DSC=Change Primary Disk
BUTTON_RECLAIM_DSC=Reclaim
BUTTON_CLEAR_CONFIG_DSC=Clear
BUTTON_IMPORT_CONFIG_DSC=Import
BUTTON_CANCEL_FOREIGN_CONFIG_DSC=Close
VOLUMENAME_DSC=Volume Name
MSG_WITH_AFFINITY_DSC=With Affinity
MSG_NO_AFFINITY_DSC=No Affinity
MSG_CC_FIX_ERROR_DSC=Continue Consistency Check and Fix Errors
MSG_CC_ON_ERROR_DSC=Stop Consistency Check on Error
REDUNDANCY_ONLY_DSC=Redundancy Only
REDUNDANCY_TRY_DSC=Redundancy when possible
EXISTINGARRAY_ONLY_DSC=Use Existing Arrays Only
REDUNDANCY_NO_DSC=No Redundancy
NO_EXISTINGARRAY_DSC=Don't use Existing Arrays
BUTTON_AUTOCONF_DSC=Auto Configuration
BUTTON_MANUALCONF_DSC=Manual Configuration
BUTTON_GUIDEDCONF_DSC=Guided Configuration
RECON_INSERT_BUTTON_DSC=Add Drive
RECON_DELETE_BUTTON_DSC=Remove Drive
RECON_NOCHANGE_BUTTON_DSC=Change RAID Level
MSG_NO_AFFINITY_OPTION=(N)o Affinity
MSG_WITH_AFFINITY_OPTION=(W)ith Affinity
##Copyback resource strings
REPLACING_PHYSICAL_DRIVE=Replacing Physical Drive
COPY_BACK_IN_PROGRESS=Copyback in progress
REPLACING_WITH_PHYSICAL_DRIVE=Replacing with Physical Drive
OPERATOIN_COPYBACK_TEXT=Replace With
COPY_BACK_OP_TEXT=(R)eplace Physical Drive
COPYBACK_OP_DESC=Replaces the physical drive and copies the data to the selected component.
MSG_REPLACE_BY=will be\nreplaced by
COPYBACK_STARTED_CHECK_PROGRESS=This may take some time. Go to the show\nprogress option to view the progress of this\nreplacement or abort the operation.
## Multipathing resource strings
PROP_PDREDUNDANTPATH_TEXT=Redundant Paths
PROPERTY_YES_TEXT=Yes
PROPERTY_NO_TEXT=No
## FRU
PROPERTY_FRU_TEXT=FRU
## 16 to 64 VDs per array support.
CONFIRM_64_VDS_DDF_PARTITION=Following this operation, your storage configuration \nwill contain more than 16 virtual disks.While supported \nby your system, the configuration may not be compatible \nwith other systems that support a maximum of 16 virtual \ndisks per array.Proceeding with this operation may prevent \nyou from moving your configuration to an incompatible system\n Are you sure you want to continue?
#CR 69055: Add the ability to make UNCONFIGURED_BAD to UNCONFIGURED_GOOD
PHDRIVE_STATE_CHANGE_OP=Change to (U)nconfigured Good
PHDRIVE_STATE_CHANGE_OP_DESC=Changes the drive state to Unconfigured Good
PROPERTY_FWENCLVER_TEXT=Enclosure FW Version
ABOUT_CC_ADVANCED_BUTTON_TEXT=Advanced
MSG_CCSCHEDULE_DATE=The specified date occurs in the past
MSG_CCDRIVE_TEXT=Virtual Disks
CCADVANCED_VDSTOCHECK_TEXT=Select virtual disks to check:
MSG_CCMODE_TEXT=Mode
CCADVANCED_SEQUENTIAL_MODE_TEXT=Sequential: Check virtual disks one at a time (slower but less performance impact).
CCADVANCED_CONCURRENT_MODE_TEXT=Concurrent: Check all selected virtual disks at once (faster but lowers performance).
SCHEDULE_CC_ADVANCED=Schedule Consistency Check - Advanced
CCADVANCED_CHECK_MODE_TEXT=Consistency check (m)ode:
CTRL_BUTTON_CC_ADVANCED_DSC=Consistency Check Advanced Window
PROPERTY_CONNECTOR_TEXT=Connector
PROPERTY_POSITION_TEXT=Position
LABEL_ENABLE_AUTO_LEARN=En(a)ble automatic learn cycles
AUTO_LEARN_ENABLED=Enabled
BBU_OPERATION_REFRESH_PROPERTIES=(R)efresh Properties Tab
BBU_OPERATION_START_LEARN=Start L(e)arn Cycle
BBU_OPERATION_SET_LEARN_PROP=Set Lear(n) Cycle Properties
BBU_OPERATION_SET_LEARN_PROP_DESC=Sets the learn cycle properties for the battery backup unit
LABEL_DISABLE_AUTO_LEARN=Disa(b)le automatic learn cycles
DELAY_NEXT_CYCLE=(D)elay next learn cycle:
NEXT_LEARN_TEXT=Next learn cycle:
AUTO_LEARN_TEXT=Automatic learn cycles:
LABEL_REMIND_LEARN=Re(m)ind me when to start a learn cycle
ADAPTER_OPERATION_13=Copyback on SMART alert
PROPERTY_SMART_CB_ENABLED=Enabled
PROPERTY_SMART_CB_DISABLED=Disabled
FIRMWARE_UPDATE_TEXT=Firmware to update:
CONTROLLER_FIRMWARE_TEXT=Co(n)troller firmware
CURRENT_VERSION_TEXT=Current version:
BIOS_TEXT=BIO(S)
FIRMWARE_FILE_NOT_FOUND=The specified file could not be found. Please check the file path and try again.
#NCQ update
PROPERTY_NCQSTATUS_TEXT=Native Command Queuing
PROPERTY_NCQ_ENABLED=Enabled
PROPERTY_NCQ_DISABLED=Disabled
MSG_INCOMPLETE_FOREIGNCFG=Incomplete Foreign Config, Please see the warnings !!
TITLE_FOREIGN_CONFIG_DETECTED=Foreign Configuration Detected
BUTTON_IMPORT_LABEL=I(m)port: Import logical configuration from all foreign drives.
BUTTON_CLEAR_LABEL=(C)lear: Remove logical configuration from all foreign drives.
BUTTON_ADVANCED_LABEL=(A)dvanced: Preview, import and clear specific foreign configurations.
MESSAGE_FOREIGN_CONFIG_DETECTED=<html>Foreign drives were detected. You must import or clear these<br>drives before they can be used.<br><br></html>
LABEL_CHOOSE_AN_OPTION=Choose an option:
MSG_CLEAR_FOREIGN_CONFIG=<html>This operation will remove the foreign configuration.<br>Are you sure you want to continue? </html>
TITLE_FOREIGN_CONFIG_CLEARED=Clear Successful.
MSG_FOREIGN_CONFIG_CLEARED=The foreign configuration was cleared successfully.
MSG_LABEL_PREVIEW=(P)review
ENCL_POSITION_TEXT=Position
ENCL_SLOT_TEXT=Slot
ENCL_BACKPLANE_TEXT=Backplane
DRIVE_GROUP_TEXT=Drive Group
VIRTUAL_DRIVES_TEXT=Virtual Drives
VIRTUAL_DRIVE_TEXT=Virtual Drive
DRIVES_TEXT=Drives
DEDICATED_HOT_SPARES_TEXT=Dedicated Hot Spares
TOTAL_FREE_CAPACITY_TEXT=Total Free Capacity
CAPACITY_TEXT=Capacity
GLOBAL_HOT_SPARES_TEXT=Global Hot Spares
UNCONFIGURED_DRIVES_TEXT=Unconfigured Drives
SPANNED_DRIVE_GROUP_TEXT=Spanned Drive Group
SPAN_TEXT=Span
PROPERTY_ENCLOSUREID_TEXT=Enclosure ID
PROPERTY_ENCLOSUREMODEL_TEXT=Enclosure Model
PROPERTY_ENCLLOCATION_TEXT=Enclosure Location
PROPERTY_USABLE_CAPACITY_TEXT=Usable Capacity
PROPERTY_STATUS_TEXT=Status
PROPERTY_RAW_CAPACITY_TEXT=Raw Capacity
PROPERTY_TYPE_TEXT=Type
PROPERTY_SOLID_STATE_DRIVE_TEXT=Solid State Drive
PROPERTY_DRIVE_TYPE_TEXT=Drive Type
SSD_TEXT=SSD
HOURS=hours
DEDICATED_HSP_DESC = <html>A dedicated hot spare will only replace problematic drives on \
selected drive groups.<br><br></html>
##################################################################
#### BLACK ROCK Changes ##
##################################################################
#### Controller & FDE Encryption - Configuration Management ##
PROPERTY_ENCR_CAPABLE_TEXT = Encryption capable
PROPERTY_ENCR_ENABLED_TEXT = Encryption enabled
PROPERTY_ENCR_METHOD_TEXT = Encryption method
DESC_ENCR_METHOD_FDE = FDE Only
DESC_ENCR_METHOD_FDE_AND_CTRL = FDE and Controller-based
PROPERTY_SECURED = Secured
PROPERTY_FDE_CAPABLE_TEXT = Full disk encryption capable
PROPERTY_DRIVE_SECURITY_METHOD = Drive security method
DESC_ENCRYPTION_METHOD_FDE = Full disk encryption
DESC_ENCRYPTION_METHOD_CTRL = Controller-based encryption
LABEL_ENCRYPTION_TEXT = En(c)ryption :
TEXT_FDE_WHEN_POSSIBLE = FDE when possible
TEXT_CONTROLLER_BASED = Controller-based only
TEXT_NO_ENCRYPTION = No Encryption
LABEL_ENCRYPTION_GROUP = Encryption
LABEL_USE_FDE_WHEN_POSSIBLE = Use (f)ull disk encryption when possible
LABEL_USE_CTRL_BASED_ENCRYPTION = Use (c)ontroller based encryption only
LABEL_NO_ENCRYPTION = No encr(y)ption
LABEL_USE_FDE = Use (f)ull disk encryption
SELECT_ENCRYPTION_METHOD_DIALOG_TITLE = Select Encryption Method
SELECT_ENCR_METHOD_DESC = <html>Select the encryption method to use for Drive Group
ENCRYPTION_METHOD_NOTE1 = <br><br>Note: Once Drive Group
ENCRYPTION_METHOD_NOTE2 = is encrypted, you will not be able to<br>remove encryption without relocating or \
clearing all virtual drives.<br><br></html>
CONFIRM_FDE_DIALOG_TITLE = Confirm Full Disk Encryption
CONFIRM_FDE_WARN_TEXT = The following global hot spares will not cover FDE drive groups\
\nbecause they are not capable of full disk encryption.
LABEL_GLOBAL_HOT_SPARES_INCAPABLE_OF_FDE = (G)lobal hot spares incapable of FDE:
ENCRYPTION_WARN_TEXT = \nOnce drive groups are encrypted, it is not possible to remove \nencryption without \
relocating or clearing all virtual drives on the \nencrypted drive groups. \
\n\n Are you sure you want to use full disk encryption?
DRIVES_USING_FDE_DIALOG_TITLE = Drives Using FDE
DRIVES_USING_FDE_DESC1 = The following drives are currently encrypted using full disk\
\nencryption. You cannot use these drives in a non-FDE drive \
\ngroup until you clear their full disk encryption.
DRIVES_USING_FDE_DESC2 = It is not possible \nto create a configuration without using these drives.
LABEL_FDE_DRIVES = (D)rives using FDE:
CONFIRM_CTRL_ENCR_TEXT = Do you want to continue with controller-based encryption \
\nwithout using these drives?
CONFIRM_CTRL_ENCRYPTION_DIALOG_TITLE = Confirm Controller Encryption
CTRL_ENCRYPTION_WARN_DESC = The following FDE-capable drives will not be used to their full \ncapability. \
\n\nOnce drive groups are encrypted, it is not possible to remove \
\nencryption without relocating or clearing all virtual drives. \
\n\nAre you sure you want to use controller encryption only?\n
CONFIRM_DRIVE_GROUP_ENCRYPTION_DIALOG_TITLE = Confirm Drive Group Encryption
DRIVE_GROUP_ENCRYPTION_DESC1 = All of the drives in Drive Group
DRIVE_GROUP_ENCRYPTION_DESC2 = will be encrypted using \nfull disk encryption. \n\nOnce drive group
DRIVE_GROUP_ENCRYPTION_DESC3 = is encrypted, you will not be able to \nremove encryption without relocating \
or clearing all virtual \ndrives.\n\nAre you sure you want to use full disk encryption?\n
CONFIRM_CLEAR_FDE_DIALOG_TITLE = Confirm Clear FDE
CLEAR_FDE_DESC1 = When you clear full disk encryption from Drive
CLEAR_FDE_DESC2 = , any data \non Drive
CLEAR_FDE_DESC3 = will be permanently lost. \n\nAre you sure you want to clear Drive
CLEAR_FDE_DESC4 = ?\n
CTRL_PASS_PHRASE_ERROR_DIALOG_TITLE = Controller Pass Phrase Error
CONTROLLER_TEXT = Controller:
CTRL_PASS_PHRASE_ERROR_DESC = \n\nThere is a problem with the encryption pass phrase on \nyour controller that prevents \
access to your drives. \n\nYou must disable and re-enable encryption, and then \
\nscan for a foreign configuration to fix the problem.\n
NON_FDE_GLOBAL_HS_TITLE = Non-FDE Global Hot Spare
NON_FDE_GLOBAL_HS_DESC = <html>This global hot spare will not act as a hot spare for the<br>following drive groups because it is \
not capable of full disk<br>encryption.<br><br>Only an FDE-capable hot spare can cover drive groups that\
<br>use full disk encryption.<br><br></html>
FDE_DRIVE_GRP_LABEL = (F)DE Drive Groups:
NON_FDE_DEDICATED_HS_TITLE = Non-FDE Dedicated Hot Spare
NON_FDE_DEDICATED_HS_DESC = <html>You have chosen to make a non-FDE drive a dedicated hot<br>spare for the following drive \
groups that are made up of all<br>FDE-capable drives.<br><br>If you choose to encrypt these \
drive groups later, this<br>dedicated hot spare will no longer work.<br><br></html>
DRIVE_GRP_LABEL = (D)rive Groups:
#### Key Management, Key Creation, Key Deletion, Key Reprovisioning ##
SELECT_DRIVE_GROUP_DEDHSP_TEXT = (S)elect drive group(s)
LABEL_SUGGESTED_SECURITY_KEY=(S)uggested security key:
SUGGESTED_SECURITY_KEY_DIALOG_TITLE = Suggested Security Key
SUGGESTED_SECURITY_KEY_DESC = <html>The security key below was generated by your controller.\
If you choose to use this<br>security key, you will need to confirm it by typing each character as shown.\
You can<br>leave this dialog open while you confirm the security key.<br><br>Be sure to record this security key, as your \
controller will not keep any <br>record of it.<br><br></html>
ENABLE_ENCRYPTION_DESC = <html>When encryption is enabled, data will be secured using a pass phrase.<br>Encryption must \
be enabled to create encrypted virtual drives.<br><br>The pass phrase is case-sensitive.\
It must be between eight and<br>thirty-two characters and contain at least one number, \
one lowercase letter,<br>one uppercase letter, and one non-alphanumeric character \
e.g. ! * @ + #).<br><br>Note: For maximum security, use thirty-two varied characters.</html>
MESSAGE_CANNOT_DISABLE_DRIVE_SECURITY = <html>You cannot disable drive security because one or more secure<br>drive groups are present \
on this controller.<br><br>In order to disable drive security, you must first delete the \
virtual drives on all<br>secure drive groups.<br><br></html>
ERROR_PASSWORD_MISMATCH = The characters entered in the pass phrase field and the confirm\nfield do not match.\n\nPlease re-enter and confirm your pass phrase.
ERROR_INVALID_PASSPHRASE = The pass phrase entered either uses an invalid character or does\nnot meet the minimum security requirements.\n\n\
The pass phrase is case-sensitive. It must be between eight and\nthirty-two characters and contain at least one number, \
one\nlowercase letter, one uppercase letter, and one non-alphanumeric\ncharacter (e.g. < > @ +).\n\n\
The space character is not permitted in the pass phrase.\n\nPlease specify a pass phrase that meets the above requirements.\n\n
ERROR_INVALID_SECURITY_KEY = The security key entered either uses an invalid character or does\nnot meet the minimum security requirements.\n\n\
The security key is case-sensitive. It must be between eight and\nthirty-two characters and contain at least one number, \
one\nlowercase letter, one uppercase letter, and one non-alphanumeric\ncharacter (e.g. < > @ +).\n\n\
The space character is not permitted in the pass phrase.\n\nPlease specify a security key that meets the above requirements.\n\n
ERROR_INCORRECT_PASSPHRASE = The pass phrase entered was incorrect. Please verify your\npass phrase and try again.
ERROR_INCORRECT_SECURITY_KEY = The security key entered was incorrect. Please verify your\nsecurity key and try again.
MESSAGE_CONFIRM_CHANGE_SECURITY_SETTINGS = <html>You chose to change the security key identifier | security key | security key<br>identifier \
and security key and not to require<br>an optional pass phrase. It is highly recommended that \
you<br>change the security key identifier whenever you change the<br>security key.<br><br>The existing \
configuration on this controller will be updated to<br>use the new security settings. If you previously \
removed any<br>secured drives, you will still need to supply the old security key<br>to import \
them.<br><br>Are you sure you want to change the drive security settings?<br><br></html>
MESSAGE_CONFIRM_ENABLE_ENCRYPTION = Drive security will be enabled on this controller using the<br>specified \
security key identifier,
LABEL_AND = and
LABEL_OR = or
LABEL_NOT = not
MESSAGE_SECURITY_KEY_ID = security key identifier
MESSAGE_SECURITY_KEY = security key
MESSAGE_PASSPHRASE = pass phrase
MESSAGE_BE_SURE_TO_RECORD = Be sure to record this information.
MESSAGE_SECURITY_KEY_PROMPTED = You may be prompted to<br>enter the security key if you perform certain operations
MESSAGE_SECRET_KEY_REBOOT = you<br>will be prompted to enter the pass phrase every time the server boots.
MESSAGE_FORGOT_SECURITY = If you forgot the {0} {1} {2}you could lose access<br>to your data.
MESSAGE_ARE_YOU_SURE_TO_CHANGE = Are you sure you want to change the drive security settings?
MESSAGE_ARE_YOU_SURE_TO_ENABLE = Are you sure you want to enable the drive security?
MESSAGE_CHOOSE_TO_REQUIRE_PASSPHRASE = You choose to {0}require an optional pass phrase.
MESSAGE_HIGHLY_RECOMMENDED = It is highly recommended that you change the<br>security key \
identifier whenever you change the security key.
MESSAGE_PREV_REMOVE_DRIVES = If you previously removed any<br>secured drives, you will \
still need to supply the old security key<br>to import them.
MESSAGE_CHOOSEN_CHANGE = You choose to change the {0}
MESSAGE_CHOOSEN_PASSPHRASE = choose to {0} require an optional pass phrase
MESSAGE_EXISTING_CONFIG = The existing configuration on this controller will be<br>updated \
to use the new security settings.
MESSAGE_CONFIRM_CHANGE_PASSPHRASE = If you change the pass phrase, the existing configuration on\n\
this controller will be updated to use the new pass phrase. If\n\
you have removed any encrypted drives, they will continue to\n\
use the old pass phrase.\n\nAre you sure you want to change the pass phrase?\n\n
MESSAGE_CONFIRM_DISABLE_ENCRYPTION = If you disable drive security, you will not be able to create any\nnew \
secure virtual drives{0}. Disabling drive security will\nnot \
affect the security or data of foreign drives.\n\nIf you removed any \
drives that were previously secured, you will\nstill need to enter \
the security key when you import them.\nOtherwise, the data contained \
on those drives will not be accessible.\n\nAre you sure you want to disable \
drive security?\n\n
MESSAGE_ALL_FDE_DRIVES_ERASED = and all secure unconfigured FDE\ndrives will be securely erased
MESSAGE_CONFIRM_DISABLE_SECURITY_FDE = and all secure unconfigured FDE drives will be securely erased
ERROR_SECURITY_KEY_MISMATCH = The characters entered in the security key field and the confirm\nfield do not match.\n\nPlease re-enter and confirm your security key.
TITLE_INVALID_PASSPHRASE = Invalid Pass Phrase
TITLE_INVALID_SECURITY_KEY = Invalid Security Key
TITLE_PASSPHRASE_MISMATCH = Pass Phrase Mismatch
TITLE_INCORRECT_PASSPHRASE = Incorrect Pass Phrase
TITLE_ENCRYPTION_ENABLED = Encryption Enabled
TITLE_CONFIRM_PASSPHRASE_CHANGE = Confirm Change Pass Phrase
TITLE_CONFIRM_DISABLE_DRIVE_SECURITY = Confirm Disable Drive Security
TITLE_CANNOT_DISABLE_DRIVE_SECURITY = Cannot Disable Drive Security
TITLE_AUTHENTICATE_DRIVE_SECURITY_SETTINGS = Authenticate Drive Security Settings
TITLE_INCORRECT_SECURITY_KEY = Incorrect Security Key
TITLE_DRIVE_SECURITY_NEEDED_TO_IMPORT = Drive Security Required to Import
CHANGE_PASSPHRASE_DIALOG_TITLE = Change Pass Phrase
ENABLE_ENCRYPTION_DIALOG_TITLE = Enable Encryption
TITLE_CONFIRM_ENABLE_DRIVE_SECURITY = Confirm Enable Drive Security
TITLE_CONFIRM_CHANGE_SECURITY_SETTINGS = Confirm Change Security Settings
TITLE_CONFIRM_DISABLE_DRIVE_SECURITY = Confirm Disable Drive Security
TITLE_SECURITY_KEY_MISMATCH = Security Key Mismatch
LABEL_SUGGEST_PASS_PHRASE = (S)uggest Pass Phrase
LABEL_SUGGEST_SECURITY_KEY = (S)uggest Security Key
LABEL_PASS_PHRASE = (P)ass phrase:
LABEL_CONFIRM = (C)onfirm:
LABEL_OLD_PASS_PHRASE = Old (p)ass phrase:
LABEL_USE_PASS_PHRASE = (U)se a pass phrase in addition to the security key
LABEL_CONTROLLER = Controller:
LABEL_ENCRYPTION_STATUS_ENABLED = Drive security is currently enabled.
LABEL_ENCRYPTION_STATUS_DISABLED = Drive security is currently disabled.
LABEL_ENCRYPTED_VIRTUAL_DRIVES = (E)ncrypted Virtual Drives:
TOOL_TIP_PASS_PHRASE = Please enter a valid pass phrase
BUTTON_LABEL_OK = Ok
BUTTON_LABEL_CANCEL = Cancel
BUTTON_LABEL_YES = (Y)es
BUTON_LABEL_NO = (N)o
BUTTON_USE_KEY = (U)se Key
BUTTON_ENABLE_ENCRYPTION = Ena(b)le...
BUTTON_CHANGE_PASSPHRASE = Chan(g)e Security Settings...
BUTTON_DISABLE_ENCRYPTION = (D)isable...
OPERATION_CHANGE_DRIVE_SECURITY = Change Dri(v)e Security
OPERATION_CHANGE_DRIVE_SECURITY_DESC = Changes the controller's drive security settings
LABEL_SECURE_KEY_ID = (S)ecurity key identifier:
LABEL_SECURITY_KEY = Security (k)ey:
LABEL_NEW_SECURITY_KEY = Ne(w) Security Key:
LABEL_OLD_SECURITY_KEY = Old security (k)ey:
LABEL_ENTER_SECURITYKEY_AND_PASSPHRASE = Please enter the current security key and pass phrase.
LABEL_ENTER_SECURITYKEY_ONLY = Please enter the current security key.
LABEL_USE_CURRENT_SECURE_KEY_ID = (U)se the existing security key identifier.
LABEL_CURRENT_SECURITY_KEY_IDENTIFIER = (C)urrent security key identifier:
LABEL_ENTER_NEW_SECURITY_KEY_IDENTIFIER = (E)nter a new security key identifier
LABEL_NEW_SECURITY_KEY_IDENTIFIER = Ne(w) security key identifier:
LABEL_USE_CURRENT_SECURITY_KEY = (U)se the existing drive security key
LABEL_ENTER_NEW_SECURITY_KEY = (E)nter a new drive security key
LABEL_RECORD_SECURITY_SETTINGS = I (r)ecorded the security settings for future reference.
LABEL_CURRENT_SECURITY_KEY = (C)urrent security key:
ENABLE_DRIVE_SECURITY_INTRODUCTION_WIZARD_PAGE_TITLE = Enable Drive Security - Introduction
ENABLE_DRIVE_SECURITY_ENTER_SECURITY_KEY_ID_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Security Key ID
ENABLE_DRIVE_SECRUITY_ENTER_SECURITY_KEY_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Security Key
ENABLE_DRIVE_SECURITY_ENTER_PASSPHRASE_WIZARD_PAGE_TITLE = Enable Drive Security - Enter Pass Phrase
CHANGE_DRIVE_SECURITY_INTRODUCTION_WIZARD_PAGE_TITLE = Change Security Settings - Introduction
CHANGE_DRIVE_SECURITY_ENTER_SECURITY_KEY_ID_WIZARD_PAGE_TITLE = Change Security Settings - Security Key ID
CHANGE_DRIVE_SECURITY_ENTER_SECURITY_KEY_WIZARD_PAGE_TITLE = Change Security Settings - Security Key
CHANGE_DRIVE_SECURITY_ENTER_PASSPHRASE_WIZARD_PAGE_TITLE = Change Security Settings - Pass Phrase
ENTER_SECURITY_KEY_ID_PAGE_DESC = <html>First, specify a security key identifier. The controller has provided a default<br>identifier for \
you. You may use this string or enter your own identifier.<br><br></html>
ENTER_SECURITY_KEY_PAGE_DESC = <html>Next, enter the security key. The security key is case-sensitive. It must be<br>between eight \
and thirty-two characters and contain at least one number,<br>one lowercase letter, one uppercase \
letter, and one non-alphanumeric character<br>(e.g. < > @ +).<br><br>Note: For maximum security, \
use thirty-two varied characters. You may<br>optionally choose for the system to suggest a strong \
security key.<br><br>Be sure to record the security key.<br><br></html>
ENTER_PASSPHRASE_PAGE_DESC = <html>Optionally, you may enter a pass phrase to provide additional security.<br>If you choose to require a \
pass phrase, you will need to enter it every time<br>you reboot the server, and whenever you provide \
the security key. The pass<br>phrase should be different from the security key.<br><br>The pass phrase is \
case-sensitive. It must be between eight and thirty-two<br>characters and contain at least one number, \
one lowercase letter, one<br>uppercase letter, and one non-alphanumeric character (e.g. ! * @ + #).<br><br></html>
ENABLE_DRIVE_SECURITY_INTRO_DESC = <html>This wizard will guide you through enabling drive security on this controller.<br>Once you enable \
drive security, you will have the option to create secure<br>virtual drives using a security key.<br><br>First, \
you will create the security key identifier. This identifier displays<br>whenever you must enter the security \
key. If you have multiple security<br>keys, the identifier will help you determine which security key to \
enter.<br><br>Next, you will create the security key. You may need to enter the security<br>key in order to \
perform certain operations. The controller can suggest a<br>strong security key.<br><br>
ENABLE_DRIVE_SECURITY_INTRO_PASSPHRASE = Finally, you will have the option to create a pass phrase. The \
pass phrase<br>provides additional security. If you choose to \
require a pass phrase, you<br>must enter it whenever you boot your \
server.<br><br>
CHANGE_DRIVE_SECURITY_INTRO_DESC = <html>Drive security is currently enabled. This wizard will guide you through<br>changing the drive security \
settings on this controller.<br><br>First, you will have the option to edit the security key identifier. \
This identifier<br>displays whenever you must enter the security key. If you have multiple<br>security keys, \
the identifier will help you determine which security key to<br>enter.<br><br>Next, you will have the option \
to edit the security key. You may need to<br>enter the security key in order to perform certain operations. \
The controller<br> can suggest a strong security key.<br><br>
CHANGE_DRIVE_SECURITY_INTRO_PASSPHRASE = Finally, you will have the option to add or change the pass phrase. \
The pass<br>phrase provides additional security. If you choose to require a \
pass phrase,<br>you must enter it whenever you boot your server.<br><br>
CHANGE_SECURITY_KEY_ID_PAGE_DESC = <html>Select whether you want to keep the existing drive security key identifier or<br>enter a new \
one.<br><br>Note: If you plan to change the security key, it is highly recommended that<br>you change \
the security key identifier. Otherwise, you will not be able to<br>differentiate between the \
security keys.<br><br></html>
CHANGE_SECURITY_KEY_PAGE_DESC = <html>Select whether you want to keep the existing drive security key or enter a<br>new one.<br><br></html>
CHANGE_PASS_PHRASE_PAGE_DESC1 = <html>Your controller currently has an optional pass phrase for additional<br>security. \
You may change the pass phrase if desired. If you wish to keep the<br>existing \
pass phrase, you must enter it again here.<br><br></html>
CHANGE_PASS_PHRASE_PAGE_DESC2 = <html>Your controller does not currently have an optional pass phrase for \
additional<br>security. You may add one if desired. You will be required \
to enter it every<br>time the server boots.<br><br></html>
AUTHENTICATE_DRIVE_SECURITY_SETTINGS_DESC = <html>Authentication is required for the changes that you requested to the drive<br>security \
settings. Please enter the current security key to authenticate these<br>changes.<br><br></html>
CONFIRM_DELETE_VIRTUAL_DRIVE_WARN1 = You have chosen to delete Virtual Drive
CONFIRM_DELETE_VIRTUAL_DRIVE_WARN_FDE=All data on the virtual drive will be lost.\n\n
CONFIRM_DELETE_VIRTUAL_DRIVE_WARN_CONTROLLER=All data on the virtual drive will be permanently erased.\n\n
CONFIRM_DELETE_VIRTUAL_DRIVE_WARN2=Are you sure you want to delete Virtual Drive
CONFIRM_CLEAR_CONFIG_WARN_FDE = You have chosen to clear the configuration. This will \
destroy \nall virtual drives. All data on all virtual drives will be \
lost.\n\nAre you sure you want to clear the configuration?
CONFIRM_CLEAR_CONFIG_WARN_CONTROLLER = You have chosen to clear the configuration. This will \
destroy \nall virtual drives. All data on all virtual drives \
will be securely \nerased. \n\nAre you sure you want to clear the configuration?
CONFIRM_SECURE_ERASE_TITLE = "Confirm Secure Erase"
DRIVE_GROUP_ENCRYPTION_DESC1 = All of the drives in Drive Group
DRIVE_GROUP_ENCRYPTION_DESC2 = will be secured using \nFull Disk Encryption. \n\nOnce drive group
DRIVE_GROUP_ENCRYPTION_DESC3 = is secured, you will not be able to \nremove the security without \
deleting the virtual \ndrives.\n\nAre you sure you want to secure Drive Group
CONFIRM_SECURE_ERASE_WARN = <html>When you securely erase a drive, any data on the drive will<br>be \
permanently lost.<br><br>Are you sure you want to securely erase the drive in
ENCLOSURE_TEXT = Enclosure
SLOT_TEXT = Slot
CONTROLLER_TEXT = Controller:
DRIVE_SECURITY_KEY_ERROR_MSG = There is a problem with the drive security key on your \ncontroller \
that prevents access to your drives.\n\nTo fix the problem, disable \
and then re-enable the drive \nsecurity feature on your controller, \
then scan for a \nforeign configuration. Your data will remain secure.
#### Importing foreign configuration ####
ENCRYPTION_REQUIRED_TO_IMPORT_DIALOG_TITLE=Encryption Required To Import
LABEL_LOCKED_DRIVES=(L)ocked Drives:
ENCRYPTION_REQUIRED_DESC=<html>You cannot import the following locked foreign drives because<br> encryption is disabled on your controller.Only unlocked drives<br> may be imported.</html>
ENCRYPTION_REQUIRED_CONTINUE_LABEL=Do you want to continue?
UNLOCK_FOREIGN_DRIVES_TITLE=Unlock Foreign Drives
UNLOCK_FOREIGN_DRIVES_DESC = <html>One or more foreign drives are locked.<br><br>In order to import these drives, you will need \
to provide the security key used to secure them. If you<br>want want to import only unlocked drives, \
leave the security key field blank and select Continue.<br><br>If the locked drives use different \
security keys, enter one security key and repeat the import<br>process for the remaining locked \
drives.<br><br></html>
UNLOCK_FOREIGN_DRIVES_SECURITY_KEY_LABEL = (S)ecurity Key
UNLOCK_FOREIGN_DRIVES_DESC4=<html>If you do not know the pass phrase, you can press Continue to import any <br> unlocked foreign drives. If you do not care about the data on these drives,<br> you can clear the drives to remove encryption and delete all existing data.</html>
BUTTON_CONTINUE_TEXT=(C)ontinue
REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_TITLE=Remove FDE from Unconfigured Drives
REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC1=<html>One or more of the drives that you unlocked does not have <br> any detectable configuration to import. In order to use these <br> drives in a new configuration, their existing full disk encryption <br> must be removed.</html>
REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC2=<html>If there is any undetected data on the drives below, removing <br> full disk encryption will permanently delete that data. If you do <br> not want to clear the data on these drives, click No to leave <br> them encrypted and import only drives that have <br> configurations.</html>
DRIVES_TO_CLEAR_LABEL=(D)rives to clear:
REMOVE_FDE_FROM_UNCONFIGURED_DRIVES_DESC3=<html>There is no way to undo this destructive operation. Are you <br> sure you want to clear these drives?</html>
CLEAR_LOCKED_FOREIGN_TITLE=Clear Locked Foreign Configuration
CLEAR_LOCKED_FOREIGN_DRIVES_DESC1=One or more foreign drives are locked and cannot be cleared.
CLEAR_LOCKED_FOREIGN_DRIVES_DESC2=<html>In order to clear these drives, you will need to provide either the pass <br> phrase used to encrypt each drive or the manufacturer ID that is typically <br> stamped on the drive. This operation will remove the foreign configuration.</html>
CLEAR_LOCKED_FOREIGN_DRIVES_LABEL=Select method to clear drive:
CLEAR_LOCKED_FOREIGN_DRIVES_LABEL1=(U)se pass phrase
CLEAR_LOCKED_FOREIGN_DRIVES_LABEL2=U(s)e manufacturer ID
CLEAR_LOCKED_FOREIGN_DRIVES_LABEL3=(M)anufacturer ID:
BUTTON_CLEAR_DRIVE_TEXT=Clear (D)rive
MSG_INCORRECT_PASSPHRASE=Incorrect security key.
MSG_INCORRECT_MANUFACTURE_ID=Incorrect Manufacturer ID.
PHDRIVE_SECURE_ERASE_OP = Securely Er(a)se Drive
PHDRIVE_SECURE_ERASE_OP_DESC = Securely erases the drive, removing drive security.
#########################################################
# CR 71555 Estatoah Falls #
#########################################################
ADAPTER_OPERATION_POWER_SETTINGS = Po(w)er Settings
ADAPTER_OPERATION_POWER_SETTINGS_DESC = Modify the power management settings.
PROPERTY_POWER_STATUS = Power Status
PROPERTY_POWERSAVE_ON = On
PROPERTY_POWER_SAVE = Powersave
PROPERTY_READY_TO_REMOVE = Ready To Remove
PHDRIVE_OPERATION_15 = (U)ndo Prepare For Removal
PHDRIVE_OPERATION_15_DESC = Cancels Prepare For Removal operation on a physical disk
PHDRIVE_OPERATION_14 = Prepare For Re(m)oval
PHDRIVE_OPERATION_14_DESC = Spins down the selected drive to ready it for removal
SPIN_DOWN_DRIVE = Sp(i)n Down Drive
SPIN_DOWN_DRIVE_DESC = Spins down the selected drive into powersave mode to conserve energy or to prepare for removal.
SPIN_UP_DRIVE = Sp(i)n Up Drive
SPIN_UP_DRIVE_DESC = Spins up a drive that is in powersave mode to prepare it for use.
POWER_SAVE_MODE_DESC_LSI = <html>The controller includes Dimmer SwitchTM technology that conserves energy by<br>placing \
certain unused drives into powersave mode. The controller will automatically<br>spin up \
drives from powersave mode whenever necessary.<br><br></html>
POWER_SAVE_MODE_DESC_OTHERS = <html>The controller conserves energy by placing certain unused drives into powersave \
mode.<br>The controller will automatically spin up drives from powersave mode<br>whenever \
necessary.<br><br></html>
ALLOW_POWERSAVE_MODE = Allow (u)nconfigured drives to enter powersave mode.
LABEL_SPINNING_UP_DRIVES = Spinning up selected drives:
LABEL_COMPLETE = complete.
TITLE_DRIVES_SPIN_UP_PROGRESS = Progress
TITLE_FOREIGN_DRIVES_SPUN_DOWN = Foreign Drives Spun Down
FOREIGN_DRIVES_SPUN_DOWN_DESC = <html>The following foreign drives are currently spun down in \
powersave<br>mode. You must spin them up in order to import them. If you do<br>not spin \
them up now, they will be skipped during the import.<br><br></html>
LABEL_SPUN_DOWN_FOREIGN_DRIVES = (S)pun down foreign drives:
#CR71008
STRING_KILO_BYTE=KB
STRING_MEGA_BYTE=MB
STRING_GIGA_BYTE=GB
STRING_TERA_BYTE=TB
STRING_PETA_BYTE=PB
#######################################################################
# CRs 94092 and 97537 Estatoah Falls Maintenance
#######################################################################
ALWAYS_WRITE_BACK_SELECTED_DESC = <html>Always Write Back mode provides optimal performance, but data loss will <br>\
occur if there is a power failure and no cache battery installed or the battery <br>\
is failed or discharged.<br><br>\ Are you sure you want to select Always Write Back mode? <br><br></html>
WRITE_THROUGH_SELECTED_DESC = <html>Write Through mode eliminates risk of losing cached data in case of power<br>\
failure. But it may result in slower performance.<br><br>\
Are you sure you want to select Write Through mode? <br><br></html>
WRITE_BACK_WITH_BBU_SELECTED_DESC = <html>Write Back with BBU policy enables Write Back caching when BBU is <br>\
installed and charged. It provides optimal balance between data safety and <br>\
performance. <br><br>\
However, slower performance should be expected when BBU is not <br>\
installed,not fully charged, or running through re-learn cycle.<br><br>\
Are you sure you want to select Write Back with BBU mode?<br><br></html>
WRITE_BACK_WITH_BBU_SELECTED_NO_OR_BAD_BATTERY_DESC =<html>You have selected Write Back with BBU.<br><br>\There is no cache battery installed or the battery charge is low or the battery<br>\
is failed or the battery is running through re-learn cycle.In this case the <br> write policy will switch to Write Through.<br><br>\
Write Through eliminates risk of losing cached data in case of power<br>failure. But it may result in slower performance.<br><br>\
Write Back with BBU policy enables Write Back caching when BBU is <br>installed and charged. It provides optimal balance between data safety and <br>\
performance.<br><br>\Are you sure you want to select Write Back with BBU mode?<br><br></html>
TITLE_ALWAYS_WRITE_BACK_SELECTED =Always Write Back Selected
TITLE_WRITE_THROUGH_SELECTED =Write Through Selected
TITLE_WRITE_BACK_WITH_BBU_SELECTED =Write Back with BBU Selected
RECONSTRUCTION_IN_PROGRESS = <html>You cannot change the properties of a virtual drive. Reconstruction is<br>\
in progress<br><br></html>
REASON_FOR_DIFFERENCE_IN_WRITE_POLICY = Reason for difference in Write Policy
BBU_NOT_INSTALLED = BBU is not installed
BBU_IS_FAILED = BBU is failed
BBU_IS_DISCHARGED = BBU is discharged
BBU_IN_RE-LEARN_CYCLE = BBU in re-learn cycle
####################################################################
# IMAGE FILE NAMES #
####################################################################
LABEL_TEMPERATURE_ICON=temperature.jpg
LABEL_FAN_ICON=fan.jpg
LABEL_POWER_ICON=powersupply.jpg
ENCLOSURE_BOX_IMAGE=enclosurebox.jpg
UNCONF_ENCLPD_IMAGE=enclosurepd.jpg
ONLINE_ENCLPD_IMAGE=onlinepd_in_enclosure.jpg
OFFLINE_ENCLPD_IMAGE=offlinepd_in_enclosure.jpg
EMPTYSLOT_ENCL_IMAGE=emptyslot_in_enclosure.jpg
HOTSPARE_ENCLPD_IMAGE=hotsparepd_in_enclosure.jpg
REBUILD_ENCLPD_IMAGE=rebuildpd_in_enclosure.gif
DEFAULT_HOST_IMAGE=host.jpg
DEGRADED_HOST_IMAGE=degraded.jpg
FAILED_HOST_IMAGE=failed.jpg
LSI_LOGO_IMAGE=lsi_logo.jpg
SELECTED_HOST_IMAGE=selected_host.jpg
RIGHT_ARROW=rightarrow.jpg
LEFT_ARROW=leftarrow.jpg
PHDRIVE_IMAGE=phdrive.png
ADAPTER_IMAGE=controller_standard.jpg
PORT_IMAGE=port.jpg
UNCONFIG_IMAGE=unconfig.png
AUTO_CONF=wrench.jpg
MANUAL_CONF=hammer.jpg
GUIDED_CONF=guided.jpg
RECON_INSERT_IMG=plus.jpg
RECON_DELETE_IMG=Scissor.jpg
RECON_CHANGE_IMG=thread_chaser.jpg
RECON_DOWN_IMG=arrowdown.jpg
RECON_UP_IMG=arrowup.jpg
PHDRIVE_SCSI_IMAGE=scsidrive.jpg
NEEDS_ATTENTION_IMAGE=needatn.jpg
PHDRIVE_FC_IMAGE=phdrive.png
PHDRIVE_SAS_IMAGE=sasdrive.jpg
BANNER_SMALL_IMAGE=small_banner.jpg
PHDRIVE_SATA_IMAGE=satadrive.jpg
LDRIVE_IMAGE=volume.jpg
BBU_IMAGE=battery.png
BANNER_IMAGE=banner.jpg
SPLASH_ICON=msm_splash_screen.jpg
FOREIGN_DRV_SAS=Foreign_Drv_sas.png
FOREIGN_DRV_SATA=Foreign_Drv_sata.png
DIALOG_BANNER_IMAGE=dialog_banner.jpg
LSI_DIALOG_LOGO_IMAGE=dialog_logo.jpg
REBUILDDRV_SAS=RebuildDrv_sas.png
REBUILDDRV_SATA=RebuildDrv_sata.png
VIRTUAL_DISK_NOIMP=VirtualDisk_noimp.png
PHYSICAL_DISK_NOIMP_SAS=NoImpDrive_sas.png
PHYSICAL_DISK_NOIMP_SATA=NoImpDrive_sata.png
LSI_PROGRAM_ICON_16=16_prg_icon.png
LSI_LOGIC_BANNER_IMAGE=lsi_logic_banner.jpg
LSI_LOGIC_LOGO_IMAGE=lsi_logic_logo.jpg
GLOBAL_HOTSPARE_IMAGE=Global_Drv_hotspr.jpg
CONTROLLER_NOENCRYPTION=controller_encryp.gif
CONTROLLER_ENCRYPTED=controller_noencryp.gif
DG_ENCRYPTION=dg_encryp.gif
DG_NOENCRYPTION=dg_noencryp.gif
DRIVE_FDE = drive_fde.gif
HOTSPARE_FDE = hotspare_fde.gif
HOTSPARE_GLOBAL_FDE = hotspare_global_fde.gif
#ESTATOAH FALLS ICONS
ARRAY_IMAGE=array.png
BACKPLANE_IMAGE=backplane.png
CONFIGURED_IMAGE=configured.png
CONFIGURED_DRIVES_IMAGE=configured_drives.png
FOREIGN_DRIVE_IMAGE=foreign_drive.png
FREE_CAPACITY_IMAGE=free_capacity.png
FREE_CAPACITY_TOTAL_IMAGE=free_capacity_total.png
HOTSPARE_IMAGE=hotspare.png
HOTSPARE_GLOBAL_IMAGE=hotspare_global.png
HOTSPARES_IMAGE=hotspares.png
HOTSPARES_GLOBAL_IMAGE=hotspares_global.png
NO_IMPORT_IMAGE=no_import.png
REBUILD_IMAGE=rebuild.png
SERVER_IMAGE=server.png
UNCONFIGURED_IMAGE=unconfigured.png
UNCONFIGURED_DRIVES_IMAGE=unconfigured_drives.png
VOLUME_IMAGE=volume.png
VOLUMES_IMAGE=volumes.png
BATTERY_IMAGE=battery.png
CDROM_IMAGE=cdrom.png
CONTROLLER_LOCK_IMAGE=controller_lock.png
CONTROLLER_STANDARD_IMAGE=controller_standard.png
CONTROLLER_UNLOCK_IMAGE=controller_unlock.png
DEGRADED_IMAGE=degraded.png
ENCLOSURE_IMAGE=enclosure.png
FAILED_IMAGE=failed.png
FOREIGN_DRIVE_UNCONFIGURED_IMAGE=foreign_drive_unconfigured.png
HOTSPARE_FDE_IMAGE=hotspare_fde.png
PARTIAL_DEGRADED_IMAGE=partialdegraded.png
TAPE_IMAGE=tape.png
VIRTUAL_DISK_NOIMP_IMAGE=virtual_disk_noimp.png
SPAN_IMAGE=span.png
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.