; Comprehensive Ultrium Driver Installer for Windows 2000/XP/2003/Vista ; Copyright © 2005 Quantum Corporation ; Version: 3.3.0.0 ; 06/07/2007 [Version] Signature = "$Windows NT$" ;---- Valid for all NT-based operating systems Class = TapeDrive ClassGUID = {6D807884-7D21-11CF-801C-08002BE10318} Provider = %INF_Provider% DriverVer = 06/07/2007,3.3.0.0 CatalogFile = QntmLto.cat [DestinationDirs] DefaultDestDir = 12 CoCopy_x86 = 11 CoCopy_ia64 = 11 CoCopy_amd64 = 11 [SourceDisksNames] 1 = %INF_Disk_Name%,,,, ;---- 4th comma added for Win XP [Manufacturer] Quantum = Quantum_Models, ntia64, ntamd64 Seagate = Seagate_Models, ntia64, ntamd64 Certance = Certanced_Models, ntia64, ntamd64 [Strings] ; Non-Localizable SPSVCINST_ASSOCSERVICE = 0x00000002 SERVICE_KERNEL_DRIVER = 1 SERVICE_DEMAND_START = 3 SERVICE_ERROR_NORMAL = 1 REG_EXPAND_SZ = 0x00020000 REG_DWORD = 0x00010001 ; Localizable strings INF_Disk_Name = "Comprehensive Ultrium Driver Installer for Windows 2000/XP/2003/Vista" INF_Provider = "Quantum Corporation" ; *** BEGIN: Repeat for each CPU Architecture ********************************* ; ****************************************************************************** ; * ; * [SourceDisksFiles.x86] QLTOx32.sys = 1 LT14ax32.dll = 1 [qntmdrv_Inst.ntx86] CopyFiles = qntmdrv_Inst.ntx86.Copy UseInfDeviceDesc = 1 ; Added to override SCSI Inquiry Data [qntmdrv_Inst.ntx86.Copy] QLTOx32.sys [qntmdrv_Inst.ntx86.Services] AddService = QLTOx32, %SPSVCINST_ASSOCSERVICE%, qntmdrv_Service_Inst_x86, qntmdrv_EventLog_Inst_x86 [qntmdrv_Service_Inst_x86] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\QLTOx32.sys [qntmdrv_EventLog_Inst_x86] AddReg = qntmdrv_EventLog_AddReg_x86 [qntmdrv_EventLog_AddReg_x86] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\QLTOx32.sys" HKR,,TypesSupported,%REG_DWORD%,7 HKR,,DeviceCharacteristics,%REG_DWORD%,0 [qntmdrv_Inst.ntx86.HW] AddReg = qntmdrv_Inst.ntx86.HW.AddReg [qntmdrv_Inst.ntx86.HW.AddReg] HKR,,DeviceCharacteristics,0x10001,0x0100 ; Use same security checks on relative opens HKR,,Security,,"D:P(A;;GA;;;BA)(A;;GA;;;SY)" ; Allow generic-all access to Built-in administrators and Local system ; ---- Start CoInstaller installation ----------------------------------------- [qntmdrv_Inst.ntx86.CoInstallers] AddReg = CoAddReg_x86 CopyFiles = CoCopy_x86 [CoCopy_x86] LT14ax32.dll,,,0x10 [CoAddReg_x86] HKR,,CoInstallers32,0x00010000,"LT14ax32.dll,CoInstaller_Entry" ; ---- End CoInstaller installation ----------------------------------------- [Quantum_Models] "Quantum LTO 3 Tape Drive" = qntmdrv_Inst, SCSI\SequentialQUANTUM_ULTRIUM_3_______ "Quantum LTO 4 Tape Drive" = qntmdrv_Inst, SCSI\SequentialQUANTUM_ULTRIUM_4_______ [Seagate_Models] "Quantum LTO 1 Tape Drive" = qntmdrv_Inst, SCSI\SequentialSEAGATE_ULTRIUM06242-XXX [Certanced_Models] "Quantum LTO 2 Tape Drive" = qntmdrv_Inst, SCSI\SequentialCERTANCEULTRIUM_2_______ "Quantum LTO 3 Tape Drive" = qntmdrv_Inst, SCSI\SequentialCERTANCEULTRIUM_3_______ ; * ; * ; ****************************************************************************** ; *** END: Repeat for each CPU Architecture ********************************* ; *** BEGIN: Repeat for each CPU Architecture ********************************* ; ****************************************************************************** ; * ; * [SourceDisksFiles.ia64] QLTOi64.sys = 1 LT14ai64.dll = 1 [qntmdrv_Inst.ntia64] CopyFiles = qntmdrv_Inst.ntia64.Copy UseInfDeviceDesc = 1 ; Added to override SCSI Inquiry Data [qntmdrv_Inst.ntia64.Copy] QLTOi64.sys [qntmdrv_Inst.ntia64.Services] AddService = QLTOi64, %SPSVCINST_ASSOCSERVICE%, qntmdrv_Service_Inst_ia64, qntmdrv_EventLog_Inst_ia64 [qntmdrv_Service_Inst_ia64] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\QLTOi64.sys [qntmdrv_EventLog_Inst_ia64] AddReg = qntmdrv_EventLog_AddReg_ia64 [qntmdrv_EventLog_AddReg_ia64] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\QLTOi64.sys" HKR,,TypesSupported,%REG_DWORD%,7 HKR,,DeviceCharacteristics,%REG_DWORD%,0 [qntmdrv_Inst.ntia64.HW] AddReg = qntmdrv_Inst.ntia64.HW.AddReg [qntmdrv_Inst.ntia64.HW.AddReg] HKR,,DeviceCharacteristics,0x10001,0x0100 ; Use same security checks on relative opens HKR,,Security,,"D:P(A;;GA;;;BA)(A;;GA;;;SY)" ; Allow generic-all access to Built-in administrators and Local system ; ---- Start CoInstaller installation ----------------------------------------- [qntmdrv_Inst.ntia64.CoInstallers] AddReg = CoAddReg_ia64 CopyFiles = CoCopy_ia64 [CoCopy_ia64] LT14ai64.dll,,,0x10 [CoAddReg_ia64] HKR,,CoInstallers32,0x00010000,"LT14ai64.dll,CoInstaller_Entry" ; ---- End CoInstaller installation ----------------------------------------- [Quantum_Models.ntia64] "Quantum LTO 3 Tape Drive" = qntmdrv_Inst, SCSI\SequentialQUANTUM_ULTRIUM_3_______ "Quantum LTO 4 Tape Drive" = qntmdrv_Inst, SCSI\SequentialQUANTUM_ULTRIUM_4_______ [Seagate_Models.ntia64] "Quantum LTO 1 Tape Drive" = qntmdrv_Inst, SCSI\SequentialSEAGATE_ULTRIUM06242-XXX [Certanced_Models.ntia64] "Quantum LTO 2 Tape Drive" = qntmdrv_Inst, SCSI\SequentialCERTANCEULTRIUM_2_______ "Quantum LTO 3 Tape Drive" = qntmdrv_Inst, SCSI\SequentialCERTANCEULTRIUM_3_______ ; * ; * ; ****************************************************************************** ; *** END: Repeat for each CPU Architecture ********************************* ; *** BEGIN: Repeat for each CPU Architecture ********************************* ; ****************************************************************************** ; * ; * [SourceDisksFiles.amd64] QLTOx64.sys = 1 LT14ax64.dll = 1 [qntmdrv_Inst.ntamd64] CopyFiles = qntmdrv_Inst.ntamd64.Copy UseInfDeviceDesc = 1 ; Added to override SCSI Inquiry Data [qntmdrv_Inst.ntamd64.Copy] QLTOx64.sys [qntmdrv_Inst.ntamd64.Services] AddService = QLTOx64, %SPSVCINST_ASSOCSERVICE%, qntmdrv_Service_Inst_amd64, qntmdrv_EventLog_Inst_amd64 [qntmdrv_Service_Inst_amd64] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\QLTOx64.sys [qntmdrv_EventLog_Inst_amd64] AddReg = qntmdrv_EventLog_AddReg_amd64 [qntmdrv_EventLog_AddReg_amd64] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\QLTOx64.sys" HKR,,TypesSupported,%REG_DWORD%,7 HKR,,DeviceCharacteristics,%REG_DWORD%,0 [qntmdrv_Inst.ntamd64.HW] AddReg = qntmdrv_Inst.ntamd64.HW.AddReg [qntmdrv_Inst.ntamd64.HW.AddReg] HKR,,DeviceCharacteristics,0x10001,0x0100 ; Use same security checks on relative opens HKR,,Security,,"D:P(A;;GA;;;BA)(A;;GA;;;SY)" ; Allow generic-all access to Built-in administrators and Local system ; ---- Start CoInstaller installation ----------------------------------------- [qntmdrv_Inst.ntamd64.CoInstallers] AddReg = CoAddReg_amd64 CopyFiles = CoCopy_amd64 [CoCopy_amd64] LT14ax64.dll,,,0x10 [CoAddReg_amd64] HKR,,CoInstallers32,0x00010000,"LT14ax64.dll,CoInstaller_Entry" ; ---- End CoInstaller installation ----------------------------------------- [Quantum_Models.ntamd64] "Quantum LTO 3 Tape Drive" = qntmdrv_Inst, SCSI\SequentialQUANTUM_ULTRIUM_3_______ "Quantum LTO 4 Tape Drive" = qntmdrv_Inst, SCSI\SequentialQUANTUM_ULTRIUM_4_______ [Seagate_Models.ntamd64] "Quantum LTO 1 Tape Drive" = qntmdrv_Inst, SCSI\SequentialSEAGATE_ULTRIUM06242-XXX [Certanced_Models.ntamd64] "Quantum LTO 2 Tape Drive" = qntmdrv_Inst, SCSI\SequentialCERTANCEULTRIUM_2_______ "Quantum LTO 3 Tape Drive" = qntmdrv_Inst, SCSI\SequentialCERTANCEULTRIUM_3_______ ; * ; * ; ****************************************************************************** ; *** END: Repeat for each CPU Architecture *********************************Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.