===========================
R E L E A S E N O T E S
===========================
Broadcom Windows Installer Projects
Windows 2000, XP 32/64 bit, Vista 32/64 bit
Windows 2003, Windows 2008
Copyright (c) 2002-2008 Broadcom Corporation
All rights reserved.
March 25, 2008
Version 2.11.33 (March 25, 2008)
--------------------------------
Enhancement:
===========
1. Change:
Added support for NetXtreme iSCSI Crash Dump
Impact:
NetXtreme and Umbrella Installer
Version 2.11.32 (March 14, 2008)
--------------------------------
Fixes:
===========
1. Problem:
Updated installer to pick up new string for localization
Cause:
Localization issues
Files:
Management Installer
Change:
Fixed the localizations issue appropriately
Version 2.11.31 (March 11, 2008)
--------------------------------
Fixes:
===========
1. Problem:
Localization issues on some of the strings and appearence
Cause:
Localization issues
Files:
Management and NetXtreme Installer
Change:
Fixed the localizations issue appropriately
Version 2.11.30 (March 6, 2008)
-------------------------------
Enhancement:
===========
1. Change:
Added support for Win2k for Netlink installer
Impact:
Netlink installer
2. Change:
Added support for selective build to include or exclude
certain features during build time
Impact:
All Installers
Version 2.11.29 (March 3, 2008)
-------------------------------
Fixes:
===========
1. Problem: ( Cont00034022 )
LH-Upgrade Version Registry entry disappears
Cause:
The condition to uninstall the registry entry was not correct so
it deletes the entry during upgrade
Files:
Umbrella installer
Change:
Condition the registry key uninstallation correctly
2. Problem: ( Cont00034021 )
LH64-Registry entries missing when silent install is performed
Cause:
The component to install registry key entry was not
associated to any feature
Files:
Umbrella installer
Change:
Associate the registry key component to the umbrella installer
feature
Version 2.11.28 (February 27, 2008)
-----------------------------------
Enhancement:
===========
1. Change:
Changed directory structure for build process and populate
all property description files to support localization
Impact:
Management and Umbrella installer
Version 2.11.27 (February 25, 2008)
-----------------------------------
Enhancement:
===========
1. Change: ( Cont00033952 )
New product string required for T4.2
Impact:
Umbrella Installer
Version 2.11.26 (February 19, 2008)
-----------------------------------
Enhancement:
===========
1. Change:
Updated installers strings for localization
Impact:
NetXtreme, NetLink, and Management installers
Fixes:
===========
1. Problem: ( Cont00033883 )
BACS3 Installer - Files are missing from BACS folder by using
Silent Install by features on Vista_64 platform.
Cause:
BACS localization files feature was not setup as the children
of BACS feature and was not required feature
Files:
Management installer
Change:
Make BACS localization files as part of BACS sub-feature and
requires it to be part of BACS when available
Version 2.11.25 (February 12, 2008)
-----------------------------------
Enhancement:
===========
1. Change: ( Cont00033700 )
Add UCM installer
Impact:
NetXtreme and NetLink installer
Version 2.11.24 (February 7, 2008)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00033760 )
BACS Installer causes SideBySide error in event log
Cause:
Microsoft Library for BACSTray was not properly published
during the shortcut creation
Files:
Management and Umbrella installer
Change:
Removed Microsoft Dll from the installer since BACSTray
v11.0.21.1 and forward does not require these Dll anymore
2. Problem: ( Cont00033786 )
Upgrade T4.0E/T4.2 umbrella installer v10.73.01 from T4.1
Gold umbrella v10.69.04 reported failure in LH.
Cause:
Microsoft Library for BACSTray was not properly upgraded
Files:
Management and Umbrella installer
Change:
Removed Microsoft Dll from the installer since BACSTray
v11.0.21.1 and forward does not require these Dll anymore
Version 2.11.23 (January 28, 2008)
----------------------------------
Enhancement:
===========
1. Change:
Removed support for Win2k for NetLink installer
Impact:
NetLink installer
Version 2.11.22 (January 25, 2008)
----------------------------------
Enhancement:
===========
1. Change:
Exclude localization resources files from installing
on server builds
Impact:
Management and Umbrella installers
Version 2.11.21 (January 23, 2008)
----------------------------------
Enhancement:
===========
1. Change:
Added support for 57710
Impact:
NetXtreme II and Umbrella installers
Version 2.11.20 (January 22, 2008)
----------------------------------
Enhancement:
===========
1. Change:
Added localization support for BACS 3
Impact:
Management installer
Fixes:
===========
1. Problem: ( Cont00033476 )
BACS3 Installer v11.08.02 (x64) - installs BASP by default
Cause:
Did not put prorper condition for x64 version of
BACS installer
Files:
Management installer
Change:
Added proper check for x64 in management installer
Version 2.11.14a (January 14, 2008)
-----------------------------------
* Cont00033412: iSCSI Boot: Please add 'iscsibcg /verif /fix'
to the umbrella installer and driver installer
Version 2.11.14 (January 10, 2008)
----------------------------------
Enhancement:
===========
1. Change:
Changed Management installer shortcut for BACS
launch target
Impact:
Management and Umbrella installer
2. Change: ( Cont00033365 )
BACS3: GUI installer needs BASP to be
visible but not selected by default
Impact:
Management Installer
3. Change: ( Cont00033375 )
Remove Everest support from Umbrella installer
Impact:
Umbrella Installer
Fixes:
===========
1. Problem:
Empty IWARP Folder on NetXtreme II and Umbrella
installer
Cause:
This folder was for IWARP feature that currently
not relevant
Files:
NetXtreme II and Umbrella installer
Change:
Removed empty IWARP folder from installer
Version 2.11.13 (January 7, 2008)
---------------------------------
Fixes:
===========
1. Problem:
NetLink installer does not install on Vista-64
Cause:
Netlink installer tried to install NDIS5.1 netlink
driver on Vista64 and the path could not be found.
Files:
Netlink Installer
Change:
Exclude the NDIS5.1 driver from installing on Vista-64
Version 2.11.12 (January 7, 2008)
---------------------------------
Enhancement:
===========
1. Change:
Added support for Everest
Impact:
Umbrella Installer
2. Change:
Removed support for Windows 2000
Impact:
Umbrella Installer
Version 2.11.11 (January 4, 2008)
---------------------------------
Enhancement:
===========
1. Change:
Allow installers to run on Windows Server 2008
Impact:
All installers
Version 2.11.10 (January 4, 2008)
---------------------------------
Enhancement:
===========
1. Change: ( Cont00032911 )
BACS3: Need installable ASF option in BACS3 installer
Impact:
Management installer
Fixes:
===========
1. Problem: ( Cont00033095 )
BACS installer from CD 10.7b.1 cd does not install ASF silently.
Cause:
ASF option was disable due to ASF visible that was introduced
earlier
Files:
Management installer
Change:
Changed ASF to visible for OEM
Version 2.11.9 (December 20, 2007)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00032135 )
BACS3 takes about 90 seconds to open on Magnum/Tomahawk with
daughtercard
Cause:
A configuration file is needed for BACS3 to disable .NET
verification
Files:
Management and Umbrella installers
Change:
Added a new configuration file
Version 2.11.8 (December 17, 2007)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00033041 )
BACS3 Side by side red bang loged in windows event log.
Cause:
The assemblies library has not published yet when the installer
tried to run the BACSTray on Vista/LH due to behavior change
that was introduced on Vista/LH
Files:
Management and Umbrella installers
Change:
Changed the sequence for running the BACSTray after the
assemblies library being published.
Version 2.11.7 (December 12, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Blocked installers from installing to Win2k8 OS
Impact:
NetXtreme II, Management, and Umbrella installers
2. Change:
Changed text for pop-up message when .NET Framework 2.0
is not present in the system
Impact:
Management and Umbrella installers
3. Change:
Removed un-necessary iSCSI driver files from the installers
Impact:
NetXtreme II and Umbrella installers
Version 2.11.6 (December 7, 2007)
---------------------------------
Fixes:
===========
1. Problem: ( Cont00032858 )
BACS3 Side by side red bangs loged in windows event log.
Cause:
Installer did not include required localization MFC files
for BACS 3
Files:
Management and Umbrella installers
Change:
Added MFC localization required module
2. Problem: ( Cont00032822 )
BACS3 LH32-"Feature Description" & "InstallShield" is grayed
out in setup wizard
Cause:
"Feature Description" box was disabled
Files:
Umbrella installers
Change:
Enable "Feature Description" box
Version 2.11.5 (November 30, 2007)
----------------------------------
* Cont00032839 - LH64-Installer doesn't install drivers for
iSCSI Offload Adapter
Version 2.11.4 (November 29, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Added documentation file for BACS 3
Impact:
Management installer and Umbrella installer
Version 2.11.3 (November 26, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Changed file name for CIM components to accomodate new file
name changes
Impact:
Management installer and Umbrella installer
2. Change:
Added JIT compiler for .NET framework 2.0 speed up BACS 3
launch upon installation
Impact:
Management installer and Umbrella installer
3. Change:
Changed popup notification text and behavior when .NET
framework is not present in the system
Impact:
Management installer and Umbrella installer
Version 2.11.2 (November 21, 2007)
----------------------------------
Enhancement:
===========
1. Change: ( Cont00032613 )
Modify BACS Installer to include graphical option to install ASF
Impact:
Management installer
Version 2.11.1 (November 15, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Added BASP, CIM, and SNMP components for OEM
Impact:
Management installer
Fixes:
===========
1. Problem: ( Cont00032496 )
Umbrella Installer: UI displays an incomplete error message
window with not text in Win2k
Cause:
String for the warning message was not in the
installer string table
Files:
Umbrella installers
Change:
Umbrella installers
Version 2.11.0 (November 12, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Add new NetLink driver installer for 5784 (Taishan)
Impact:
NetLink Installer
2. Change:
Revert back changes on v2.10.59 for NetXtreme I installer
Impact:
NetXtreme I installer and Umbrella installer
Version 2.10.59 (November 9, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Added support for 5784 (Taishan)
Impact:
NetXtreme I installer
Version 2.10.58 (November 9, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Added support for the latest CIM provider
Impact:
Management and umbrella installer
2. Change: ( Cont00032081 )
T4.0: umbrella installer will need to
check for the presence of ".NET" for BACS3
Impact:
Management and umbrella installer
Fixes:
===========
1. Problem:
Setup /a overwrites iSCSI drivers between different
OSes
Cause:
Changed the path name for iSCSI
Files:
NetXtreme II and Umbrella installers
Change:
NetXtreme II and Umbrella installers
Version 2.10.57 (November 7, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Changed file names for BACS 3
Impact:
Management and umbrella installer
Fixes:
===========
1. Problem: ( Cont00031704 )
BACS3 - Support information in add/remove programs
list BACS as BACS 2 in comments section
Cause:
Carried over from the older BACS 2 installer
Files:
Management installer
Change:
Changed the strings for BACS 2 related files to BACS 3
2. Problem: ( Cont00032313 )
BACS3: BACS3 should check the existence of BACS2 before install
Cause:
Changed product code to perform major upgrade
Files:
All installers
Change:
All installers
Version 2.10.56 (October 19, 2007)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00031704 )
BACS3 - Support information in add/remove programs
list BACS as BACS 2 in comments section
Cause:
Carried over from the older BACS 2 installer
Files:
Management installer
Change:
Changed the strings for BACS 2 related files to BACS 3
2. Problem: ( Cont00031711 )
Umbrella Installer v10.53.1 doesn't install in Win 2k
Cause:
Setup Prerequisites for .NET Framework 2.0 in Win2k is
different from other newer OSes
Files:
Management and Umbrella installer
Change:
Changed the Setup prerequisites condition for .NET 2.0
framework for all Oses according to MSFT KB318785
3. Problem: ( Cont00031919 )
Bacs3: Bacs systemtray does not start
Cause:
Migrated BACSTray to use Visual studio 2005 library
Files:
Management and Umbrella installer
Change:
Included VS2005 libraries into the installers
4. Problem: ( Cont00031924 )
Bacs3: Bacs icon is missing in control panel
Cause:
Migrated BACSTray to use Visual studio 2005 library
Files:
Management and Umbrella installer
Change:
Included VS2005 libraries into the installers
Version 2.10.55 (October 10, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Added support for the new iSCSI driver name change
Impact:
NetXtreme II Installer and Umbrella installer
Fixes:
===========
1. Problem: ( Cont00031802 )
Umbrella Installer: reinstallation does not work.
Cause:
64 bit umbrella and management installer called the wrong
API for BASP upgrade
Files:
Management and Umbrella installer 64 bit
Change:
Used the correct API to upgrade BASP
Version 2.10.54 (October 9, 2007)
---------------------------------
Enhancement:
===========
1. Change:
Silent installation by default does not install
ISCSI Crash Dump driver
Impact:
NetXtreme II Installer and Umbrella installer
Fixes:
===========
1. Problem: ( Cont00031767 )
Silent.txt Advertises Silent Downgrade Feature for other
OEMs
Cause:
Silent.txt is not updated
Files:
Silent.txt
Change:
Customize Silent.txt for each OEM
Version 2.10.53 (October 5, 2007)
---------------------------------
Enhancement:
===========
1. Change:
Added support for Windows Server 2008
Impact:
All installers
Version 2.10.52 (October 5, 2007)
---------------------------------
Enhancement:
===========
1. Change: ( Cont00031654 )
Umbrella Installer: Need to Include ISCSI Crash
Dump Driver Option as Seen on T3.7 Driver Installer
Impact:
Umbrella installer
2. Change:
Changed iSCSI Crash Dump driver name and description for
installers
Impact:
NetXtreme II driver installer and umbrella installer
Fixes:
===========
1. Problem: ( Cont00031636 )
Umbrella Installer:Device drivers do not get loaded after
installation completes.
Cause:
Wrong feature name is used for Umbrella installer
Files:
NetXtreme II driver installer and Umbrella installer
Change:
Changed the action for installing devices
2. Problem:
iSCSI Crash Dump driver registry modification gets called
all the time
Cause:
No condition check for iSCSI crash dump action
Files:
NetXtreme II driver installer and Umbrella installer
Change:
Changed the action for running iSCSI crash dump action
Version 2.10.51 (October 3, 2007)
---------------------------------
Enhancement:
===========
1. Change:
Added necessary files for BACS 3
Impact:
Management and Umbrella installer
Version 2.10.50 (September 21, 2007)
------------------------------------
Enhancement:
===========
1. Change:
Added support for BACS 3
Impact:
Management and Umbrella installer
2. Change:
Removed support for Win9x
Impact:
Management and Umbrella installer
Version 2.10.39 (September 20, 2007)
------------------------------------
Enhancement:
===========
1. Change:
Added new feature for iSCSI Crash Dump utility
Impact:
NetXtreme II Driver installer
2. Change:
Added support to disable downgrade for all installers
prior to T3.7
Impact:
NetXtreme II and Umbrella installer
Fixes:
===========
1. Problem: ( Cont00031490 )
Windows 64 bit U-Installer does not write UInstallerVersion
to WOW6432Node
Cause:
Umbrella installer did not include 32 bit registry node
Files:
Umbrella Installer
Change:
Added 32 bit registry node into 64 bit umbrella installer
Version 2.10.38 (September 19, 2007)
------------------------------------
Enhancement:
===========
1. Change: ( Cont00031471 )
The NX2 Driver Installer Should not Load ISCSI Drivers
including Crash Dump in Vista
Impact:
NetXtreme II and Umbrella Installer
Version 2.10.37 (September 10, 2007)
------------------------------------
Fixes:
=====
1. Problem: ( Cont00031270 )
Additional modification in the driver installer is
required for iSCSI Boot crash dump support
Cause:
The registry entry was created on the wrong registry
entry and the driver file was copied to the wrong
folder on x64 system
Files:
NetXtreme II and Umbrella installer
Change:
Fixed the location for the driver file and registry entry
Impact:
NetXtreme II and Umbrella installer
2. Problem:
Co-Installer file was copied to the wrong directory
Cause:
Co-Installer file for x64 was copied to the wrong
system folder
Files:
NetXtreme II and Umbrella installer
Change:
Fixed the path to copy the co-installer over
Impact:
NetXtreme II and Umbrella installer
Version 2.10.36 (Septemter 5, 2007)
-----------------------------------
Enhancement:
===========
1. Change: ( Cont00030883 )
W2K3 x 64 update changes the device state from disabled
to enabled
Impact:
Umbrella installer
Version 2.10.35 (August 29, 2007)
---------------------------------
Enhancement:
===========
1. Change:
Added support for iSCSI driver installation
Impact:
NetXtreme II and Umbrella Installer
2. Change:
Create a registry entry in MSFT iSCSI initiator
for iSCSI "crash dump"
Impact:
NetXtreme II and Umbrella Installer
Version 2.10.34 (August 23, 2007)
--------------------------------
Enhancement:
===========
1. Change:
Changed Umbrella installer to modify driver parameter
during upgrade/downgrade to/from T3.5 installer to
accomodate iSCSI enumeration
Impact:
Umbrella Installer
Fixes:
===========
1. Problem: ( Cont00030995 )
Broadcom folder left behind after uninstallation of driver
and management installer.
Cause:
Certain Components not set to proper directory
Files:
Management Installer
Change:
Broadcom folder removed after uninstallation.
Version 2.10.33 (August 6, 2007)
--------------------------------
Fixes:
===========
1. Problem: ( Cont00030629 )
Teton Driver Downgrade Will Result in Duplicates
and Invalid Advanced Properties
Cause:
Downgrade installer that has older driver that does
not support newer feature will fail to cleanup
the registry key
Files:
NetXtreme II installer and Umbrella Installer
Change:
Prevent downgrade to older installers
Version 2.10.32c (August 2, 2007)
---------------------------------
* Cont00030866
Version 2.10.32b (July 24, 2007)
--------------------------------
* Cont00029330
Version 2.10.32 (June 21, 2007)
--------------------------------
Enhancement:
===========
1. Change:
Changed NetXtreme II Driver installer to only set
KMDF registry key for umbrella during upgrade and
booting through BRCM iSCSI boot device
Impact:
Umbrella Installer
Fixes:
===========
1. Problem: ( Cont00030096 )
Management Installer should not advertise BASP on Home/
Personal Editions of Vista and XP.
Cause:
There was no filter condition before.
Files:
Management Installer and Umbrella Installer
Change:
BASP feature no longer is advertised.
Version 2.10.31b (June 21, 2007)
--------------------------------
Version 2.10.31 (June 14, 2007)
--------------------------------
Enhancement:
===========
1. Change: ( Cont00029821 )
Can not disable TOE from GUI
Impact:
Management Installer and Umbrella Installer
2. Change: ( Cont00029936 )
Need Installer Support for "Co-installer fix"
for NetXtreme II Driver Upgrade Speed/duplex Issue
Impact:
NetXtreme II Driver Installer & Umbrella Installer
Version 2.10.30 (June 6, 2007)
--------------------------------
Enhancement:
===========
1. Change:
Added support for NDIS6 BASP for Vista
Impact:
Management Installer
2. Change:
Integrate BASP Upgrade module to Installer
Impact:
Management Installer & Umbrella Installer
Version 2.10.24 (May 31, 2007)
-----------------------------------
Fixes:
===========
1. Problem: ( Cont00029747 )
Improper text appears for 4401 Installer using Dutch.
Cause:
Dutch was not properly translated for 4401 Driver Installer
Files:
4401 Driver Installer localization
Change:
Default English text is shown in place of improper text.
Version 2.10.23 (May 25, 2007)
--------------------------------
Enhancement:
===========
1. Change: ( Cont00029239 )
OEM requies driver installer to be able to down-level
the NDIS driver(s)
Impact:
NetXtreme I and II driver installers. These changes assume
that the older drivers to be downgraded are forward
compatible with the newer drivers.
Fixes:
===========
1. Problem:
NetXtreme I driver installer causes a popup during silent
installation
Cause:
Did not handle the silent installation popup properly
Files:
NetXtreme I driver installer
Change:
Added UI check level to properly display popup during
UI/silent installations
Version 2.10.22 (May 15, 2007)
--------------------------------
Enhancement:
===========
1. Change: ( Cont00029451 )
Remove the "Upgrade" button on the License tab
in BACS for NX2
Impact:
Umbrella Installer
Version 2.10.21 (May 2, 2007)
--------------------------------
Enhancement:
===========
1. Change: ( Cont00029361 )
Added Bpowmon to an OEM Management Installer
Impact:
Management Installer
Version 2.10.20 April 30, 2007)
----------------------------------
Enhancement:
===========
1. Change: ( Cont00025927 )
Added OEM support info for a NetExtreme II Installer
Impact:
NetXtreme II Driver Installer
Fixes:
===========
1. Problem: ( Cont00029283 )
Management installer does not upgrade ASF 32 bit on
x64 platforms
Cause:
ASF 32 bit upgrade scenario was not properly handled.
Files: Management Installer
Change:
Management installer properly upgrades from ASF 32 bit on
x64 platforms
2. Problem: ( Cont00029227 )
No BACS icon in system tray after installation
of BACS.
Cause:
Improper value set for all users.
Files:
Management Installer
Change:
Set all users to proper value.
3. Problem: ( Cont00029294 )
When running installer using AT command-line task scheduler,
not all components get installed.
Cause:
Improper value set for all users.
Files:
Management Installer
Change:
Set all users to proper value.
Version 2.10.19 (April 18, 2007)
--------------------------------
Fixes:
===========
1. Problem:
Installing driver on Windows Vista on user under "Administrator"
privilege failed
Cause:
The manifest file for installer was set to the wrong privilege
Files:
NetXtreme I driver Installer modules
Change:
Changed the manifest file to the appropriate setup
Impact:
NetXtreme I Driver Installer
Version 2.10.18 (April 12, 2007)
--------------------------------
Enhancement:
===========
1. Change: ( Cont00029036 )
Added support for NetXtreme II driver installer in
iSCSI boot environment
Impact:
NetXtreme II Driver Installer
Version 2.10.17 (April 10, 2007)
--------------------------------
Enhancement:
===========
1. Change: ( Cont00029051 )
Integrated Management Installer with ASF
Impact:
Management Installer
Version 2.10.16 (March 26, 2007)
--------------------------------
Enhancement:
===========
1. Change:
Added support for NetExtreme II for Windows Vista
Impact:
5706 Driver Installer
Fixes:
===========
1. Problem: ( Cont00028462 )
BACS Installer leaves an empty folder in 'Program Files (x86)' for x64.
Cause:
Unneeded Components were present
Files:
BACS Management Installer
Change:
Removed unneeded components
Version 2.10.15 (February 22, 2007)
-----------------------------------
Fixes:
===========
1. Problem: ( Cont00028469 )
Improper text appears during installer in Vista (Swedish).
Cause:
Swedish was not properly translated for 4401 Driver Installer
Files:
4401 Driver Installer localization
Change:
Default English text is shown in place of improper text.
Version 2.10.14 (February 16, 2007)
-----------------------------------
Fixes:
===========
1. Problem: ( Cont00028517 )
Umbrella Installer needs to include additional DLL
files that go with the VBD driver
Cause:
Latest driver and umbrella installer did not have the
newly added DLLs
Files:
NetXtreme II and Umbrealla Installers
Change:
Added the additional driver files to the installer package
Version 2.10.13 (January 30, 2007)
----------------------------------
Enhancement:
===========
1. Change:
Added support for ASF Configuration for AMD64 platform
Impact:
ASF Installer
Version 2.10.12 (January 15, 2007)
----------------------------------
Enhancement:
===========
1. Change: ( Cont00028109 )
Add WinXP 32/x64 to the supported OS for Teton
DrvInstaller
Impact:
NetXtreme II Driver Installer
Version 2.10.11 (January 12, 2007)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00028127 )
W2K364 - Umbrella installer only writes UInstallerVersion
to the 64bit reg
Cause:
When updating the installer project into the newer build,
this registry entry was accidentally removed.
Files:
Umbrella Installer database
Change:
Added 32 bit registry entry when running umbrella installer
on 64 bit target system
Version 2.10.10 (January 11, 2007)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00028061 )
Umbrealla Installer v10.15.01 does not remove all
folders after a silent uninstall in W2K3 x64 - no SNP
Cause:
This is because of the side effect introduced on the
fix for Cont00027870.
Files:
FixForUpgrade.exe
Change:
Changed the T2.6 Umbrella installer during major upgrade
to not remove 5706 during major upgrade by changing the
target parameter instead of the condition
Version 2.10.9 (January 08, 2007)
----------------------------------
Fixes:
===========
1. Problem:
The application description display for the
management installer was displayed untranslated
for all languages.
Cause:
The description string was not translated up until
now.
Files:
BMgmtInstaller.ism
Change:
Translated the strings for all the languages.
2. Problem:
The hotkey in the Dutch language for the "back"
button was not unique.
Cause:
There was a clash in the accelerator hotkey
between the back and next button.
Files:
BMgmtInstaller.ism
Change:
Picked a different accelerator hotkey for the
back button.
Version 2.10.8 (December 29, 2006)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00027870 )
SLB Team Serving as NLB Cluster Adapter Loses All
Members During Driver Upgrade
Cause:
When doing major upgrades, the older installer in
question (the version mentioned in the bug report)
accidentally uninstalls the NDIS VBD client. This
changes the instance id when the major upgrade finishes.
Files:
FixForUpgrade.exe
Change:
Updated FixForUpgrade.exe to detect the scenario and
skip uninstallting the NDIS VBD client during the
scenario mentioned in the bug.
2. Problem: ( Cont00027883 )
4401 Driver Installer - Improper Publisher Name
appears in Programs and Features for Vista (German)
Cause:
The company name is displayed with wrong translated
string.
Files:
BDrvInst44.ism.
Change:
To fix this, I changed the string table to display
un-translated company name in English.
This is how our NetXtreme installer does
Version 2.10.7 (December 28, 2006)
----------------------------------
Fixes:
===========
1. Problem: ( CQ27966 )
Silent Install by Feature on IA64 and IA32 Platforms
appears installed but does not install components.
Cause:
The feature hierarchy was not setup right in the
setup design.
Files:
BMgmtInstaller.ism
Change:
Renamed the parent and children feature names in the
setup design and setup the hierarchy correctly. Also
set the "required" field on all the features appropriately.
Version 2.10.6 (December 21, 2006)
----------------------------------
Enhancement:
===========
1. Change:
Request to write into registry key hive of the product
release version for umbrella installer
Impact:
Umbrella and Management Installer
Version 2.10.5 (December 19, 2006)
----------------------------------
Enhancement:
===========
1. Change:
Deleted THA localization from BACS
Impact:
Management Installer
Version 2.10.4 (December 12, 2006)
----------------------------------
Enhancement:
===========
1. Change:
Added support for reboot detection using XML file for
4401 Driver Installer
Impact:
4401 Driver Installer
Fixes:
===========
1. Problem: ( Cont00027491 )
Upgrading MgmtApps from 9.4b to 9.7 fails
Cause:
This is because if Rel 8.1 Management Installer installed
on the system, the later installer will never prompt for reboot
although BASP is installed. Reboot is needed to upgrade
BASP.
Files:
Management Installer modules
Change:
Changed the condition to reboot all the time when BASP exists
Impact:
Management Installer
2. Problem: ( Cont00027826 )
BACS and ASF : Short cut link's right click properties are
different
Cause:
The initial ASFConfig shortcut was only a "dummy" shortcut.
Files:
ASF Installer module
Change:
Changed the ASFConfig shortcut to have a valid location and path
and changed the behavior of the ASFConfig shortcut
Impact:
ASF Installer
Version 2.10.3 (December 7, 2006)
---------------------------------
Enhancement:
===========
1. Change:
TPM Driver Installer should only run on Windows XP.
Impact:
TPM Driver Installer
2. Change:
Added Link and Support Information on TPM Driver Installer
Impact:
TPM Driver Installer
Version 2.10.2 (November 22, 2006)
-----------------------------------
Enhancement:
===========
1. Change: ( Cont00024378 )
Running the setup with the "/a" option doesn't require a path
Impact:
Umbrella Installer
Fixes:
===========
1. Problem: ( Cont00027604 )
ASF Installer: Cancel installation prompt pops up
when clicking on the "Next" button
Cause:
The condition to advance to the installation was wrong.
Files:
ASF Installer
Change:
Changed the condition to correctly advance to the
installation process
Impact:
ASF Installer
2. Problem: ( Cont00027604 )
On Vista 64bit, the installation can be completed, but an
ASFconfig folder with the help file is created in the
Program Files (x86) directory. This installer should NOT be
installing any ASFConfig component.
Cause:
The help file was not part of the ASF Config
Files:
ASF Installer
Change:
Made the help file to be always part of the ASF COnfig
Impact:
ASF Installer
Version 2.10.1 (November 13, 2006)
----------------------------------
Enhancement:
===========
1. Change: ( Cont00014597 )
Need umbrella installer to be able to force down grade
Impact:
Umbrella and Management Installer
Fixes:
=====
1. Problem: ( Cont00026828 )
Blank popup message when running umbrella installer silently
Cause:
During downgrade scenario, the custom action to display the
popup did not properly conditioned to surpress during
downgrade
Files:
Management and Umbrella modules
Change:
The downgrade capability is disabled unless the
users specifically set the switch.
Impact:
Umbrella Installer
Version 2.10.0 (November 3, 2006)
---------------------------------
Enhancement:
===========
1. Change:
Upgraded all Installers to new Installshield
Version 12.
Impact:
All Installers
2. Change:
Changed Management Installer Feature hierarchies
to be consistent with the other Installers
Impact:
Management Installer
Version 1.10.9 (May 31, 2007)
-----------------------------------
Fixes:
===========
1. Problem: ( Cont00029747 )
Improper text appears for 4401 Installer using Dutch.
Cause:
Dutch was not properly translated for 4401 Driver Installer
Files:
4401 Driver Installer localization
Change:
Default English text is shown in place of improper text.
Version 1.10.8 (February 22, 2007)
-----------------------------------
Fixes:
===========
1. Problem: ( Cont00028469 )
Improper text appears during installer in Vista (Swedish).
Cause:
Swedish was not properly translated for 4401 Driver Installer
Files:
4401 Driver Installer localization
Change:
Default English text is shown in place of improper text.
Version 1.10.7 (December 29, 2006)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00027883 )
4401 Driver Installer - Improper Publisher Name
appears in Programs and Features for Vista (German)
Cause:
The company name is displayed with wrong translated
string.
Files:
BDrvInst44.ism.
Change:
To fix this, I changed the string table to display
un-translated company name in English.
This is how our NetXtreme installer does
Version 1.10.6 (December 12, 2006)
----------------------------------
Fixes:
===========
1. Problem: ( Cont00027826 )
BACS and ASF : Short cut link's right click properties are
different
Cause:
The initial ASFConfig shortcut was only a "dummy" shortcut.
Files:
ASF Installer module
Change:
Changed the ASFConfig shortcut to have a valid location and path
and changed the behavior of the ASFConfig shortcut
Impact:
ASF Installer
Version 1.10.5 (November 22, 2006)
-----------------------------------
Fixes:
===========
1. Problem: ( Cont00027604 )
ASF Installer: Cancel installation prompt pops up
when clicking on the "Next" button
Cause:
The condition to advance to the installation was wrong.
Files:
ASF Installer
Change:
Changed the condition to correctly advance to the
installation process
Impact:
ASF Installer
2. Problem: ( Cont00027604 )
On Vista 64bit, the installation can be completed, but an
ASFconfig folder with the help file is created in the
Program Files (x86) directory. This installer should NOT be
installing any ASFConfig component.
Cause:
The help file was not part of the ASF Config
Files:
ASF Installer
Change:
Made the help file to be always part of the ASF COnfig
Impact:
ASF Installer
Version 1.10.4 (October 24, 2006)
-----------------------------------
Enhancement:
===========
1. Change: ( Cont00026995 )
ASF IP Monitor does not work for Vista x64 system.
Impact:
ASF Installer
2. Change: ( Cont00027096 )
Add BACS and BACS Installer support for Windows
Vista 64bits (AMD64) for OEM
Impact:
Management Installer
3. Change:
Changed the NICCheck API behavior
Impact:
All drivers and umbrella installers
Fixes:
===========
1. Problem: ( Cont00027113 )
Umbrella Installer removes teton/legacy driver folders
when bacs/basp, snmp, cim are selected for removal
Cause:
A side effect from the fix done in Cont00026233 and
Cont00026432.
Files:
Management Installer modules and Umbrella Installer
Change:
Changed the feature hierarchy in umbrella installer to
make sure that drivers are installed by default and
de-selectable
Impact:
Management and Umbrella Installer
Version 1.10.3 (October 11, 2006)
-----------------------------------
Fixes:
===========
1. Problem: ( Cont00027095 )
Silent Install from BRCM Umb Installer to BRCM Drv
Installer v10.01.01 Results in a Pop Up Message-W2K3x64
Cause:
The condition check for popup message did not include
the scenario when running silent installation
Files:
NetXtreme II x64 driver installer modules
Change:
Changed the popup display error message to handle
silent installation scenario
Impact:
NetXtreme II driver installer and Umbrella Installer
Version 1.10.2 (October 4, 2006)
-----------------------------------
Fixes:
===========
1. Problem:
The installation failed when NICChecek property is
turned on Windows Vista.
Cause:
The NICCheck always checks against the NDIS5.1
INF file which recently has a Vista entry inside the
Vista that causes the NICCheck not checking the correct
Hardware ID
Files:
NetXtreme I driver installer modules
Change:
Add a new functionality to check against the NDIS6 INF
file in the case of Windows Vista
Impact:
NetXtreme I driver installer
Version 1.10.1 (October 4, 2006)
-----------------------------------
Enhancement:
===========
1. Change:
Changed the INF File name for NDIS 5.1 driver that gets
installed in Vista to be unified with the older Windows
INF file name
Impact:
NetXtreme I driver and umbrella installer
Version 1.10.0 (October 2, 2006)
-----------------------------------
Enhancement:
===========
1. Change:
Added a new API to abort installation process when
NCU package has already existed in the system
Impact:
NetXtreme II driver and umbrella installer
2. Change:
Changed the NetXtreme II driver installer abort installer
when it detects Windows XP using the default MSI popup
message box instead of our own custom message
Impact:
NetXtreme II driver installer
Version 1.2.0 (September 25, 2006)
-----------------------------------
Enhancement:
===========
1. Change:
Changed 4401 Driver installer into MSM based installer
from MSI
Impact:
4401 Driver Installer
2. Change:
ASF Installer is ready for Vista. ASFConfig (ASF GUI)
will not get installed on Vista x64 platform
Impact:
ASF Installer
3. Change: ( Cont00026774 )
Uninstalling BACS when tray icon is present will trigger
warning message on Vista.
Impact:
Management and Umbrella Installer
4. Change: ( Cont00026232 )
Umbrella installer to install CHM (help) file by default
Impact:
Management and Umbrella Installer
5. Change: ( Cont00026665 )
The Upgrading Error from BRCM Umbrella Installer to BRCM
Drv/Mgmt Apps Installer Needs to be User Friendly
Impact:
Drivers, Management and Umbrella Installer
Version 1.1.14 (September 15, 2006)
-----------------------------------
Fixes:
===========
1. Problem:
BACS IA64 shortcut link is not properly set
Cause:
Installer shortcut for BACS IA64 was not set properly
Files:
BACS Module
Change:
Fixed the shortcut to have the correct link
Impact:
Management Installer
Version 1.1.13 (September 7, 2006)
----------------------------------
Enhancement:
===========
1. Change:
Management Installer is ready for Vista. On Vista platform
installation, BASP will not get installed
Impact:
Management Installer
Fixes:
===========
1. Problem: ( Cont00026593 )
There is a dead link of Broadcom in support information
(TW,CH OS)(v9.52.0.0)
Cause:
There are typos on the link for Chinese localization string
Files:
Management Installer
Change:
Fixed the link type to the correct Broadcom link
Impact:
Management Installer
Version 1.1.12 (August 30, 2006)
---------------------------------
Fixes:
===========
1. Problem: ( Cont00026590 )
Silent install of ia32 ASFConfig in x64 Environment Results
in Pop-up Message
Cause:
When the installer encounter invalid OS target machine, the
installer will popup a message of "invalid OS" and aborts
the installer. The popup message did not handle the silent
installation scenario properly.
Files:
All Installer
Change:
Add the condition to not popup during silent install
Impact:
All installers
Version 1.1.11 (August 18, 2006)
---------------------------------
Enhancement:
===========
1. Change: ( Cont00026432 )
Add/Remove Components should not Display Driver Selection for
Umbrella Installer
Impact:
Changed the umbrella installer to not showing Driver selection
and skip all the driver installations during add/remove components
Fixes:
===========
1. Problem: ( Cont00026233 )
Silent install of fails when ADDSOURCE used
Cause:
When umbrella installer tried to install BACS component only
using the commandline, driver installers custom actions are
also being executed but the driver files are not being copied
into the directory. Therefore, it made the installer failed
Files:
Umbrella Installer
Change:
Add Driver Installer modules on every features
Impact:
Umbrella Installer
2. Problem: ( Cont00026409 )
T2.8.4 Driver installer silent update results in pop-up message
Cause:
Reboot popup message box showed up during silent installation
to remind users to reboot the system after upgrading
Files:
NetXtreme II Merge Modulues
Change:
Changed popup message to use Windows popup message box for reboot
that will lead to automatic reboot during silent installation
Impact:
All installers
3. Problem: ( Cont00026166 )
Error occurs when launching BACS under non-admin previlage on
XP x64
Cause:
BACS components for 64 bit platform uses advertised shortcut that
resulting the shortcut to be installed using the msi file
when the first BACS shortcut is launched. In non-admin account,
that account tried to find the msi account on the account's default
location which resulting the file cannot be found
Files:
BACS 64 bit Merge Modules
Change:
Changed the BACS shortcut into non-advertised shortcut and specify
the exact location of the application
Impact:
Management and Umbrella Installer
4. Problem: ( Cont00026390 )
IA32 ASF Config Installer runs to Completion in Windows XP x64
Cause:
There is no abort installation feature on the ASF Installer to detect
and abort the installation when trying to install at the wrong platform
Files:
ASF Installer 32bit modules
Change:
Add a feature to abort installation when wrong OS platform is detected
and show up a dialog box with localized strings
Impact:
ASF Installer
5. Problem: ( Cont00026148 )
BACS Installshield contains English strings in German installer version
Cause:
The localized strings cannot be put inside the merge modules, it must be
in the installer database in order to get localized.
Files:
Management and ASF Installers Modules
Change:
Moved all the localized string from the merge modules to the installer
database in order for the localized strings to get picked up
Impact:
NetXtreme Driver, ASF and Management installers
6. Problem: ( Cont00026444 )
BACS installer v9.06.02 upgrade from v9.03.01 results in reboot.
Cause:
During installer upgrade, the Power Monitor service is using the BMAPI
Therefore, the installer cannot replace/update the BMAPI file that
forces the installer to prompt for reboot at the end.
Files:
Management Installers modules
Change:
Stop the Power Monitor service before upgrading and restart it back again
when the upgrade is finished. This change will also affect during
uninstallation
Impact:
Management installers
Version 1.1.10 (August 8, 2006)
---------------------------------
Enhancement:
===========
1. Change:
When installing both Umbrella and NetXtreme II driver
installer on Windows XP platform, the installation will
be aborted in the case of NetXtreme II installer and
NetXtreme II related installation will be skipped on
umbrella installer
Impact:
Umbrella and NetXtreme II Driver Installer
Fixes:
===========
1. Problem: ( Cont00025871 )
Cancelling Mgmt Apps Uninstallation Toward the
End Will Cause Error if Uninstallation/Reinstallation
Attempted Subsequently
Cause:
The Cancel button is not disabled in the Setup
Progress dialog if initiated from Control Panel's
Add/Remove Program. Cancelling during install /
upgrade / uninstall is not supported.
Files:
All Installer files
Change:
Hide cancel button
Impact:
All installers.
2. Problem: ( Cont00026086 )
Running Sequential Silent Install of Umbrella Installer Leaves
L2 Driver in Disabled State
Cause:
During silent install, the popup message box that shows the system
need to be rebooted did not show up because the box was using
our BRCM made popup box
Files:
Umbrella, NetXtreme, NetXtreme II, and TPM Driver Installer
Change:
Changed popup message to use Windows popup message box for reboot
that will lead to automatic reboot during silent installation
Impact:
All installers
Version 1.1.9 (July 14, 2006)
---------------------------------
Fixes:
===========
1. Problem: ( Cont00025778 )
Upgrade Installation of Teton Driver from T2.6
Release Did not Update the Co-installer
Cause:
Bug in BWinInst.dll where reboot requests were not
properly handled
Files:
BDrv5706: BDrv5706Msm_*.ism, BDrv5706.ism
BDrvInstaller: BDrvInstMSM_*.ism, BDrvInstaller.ism,
BMgmtInstaller: CustomActionMSM_*.ism, BMgmtInstaller.ism
Change:
Call new BWinInst API to set the property for reboot
request and show reboot message based on the property
Impact:
All driver installers.
2. Problem: ( Cont00025793 )
Scheduled Installation of Teton Driver Installer
Fails to load Drivers in Win2K
Cause:
DIFxAPI returned access denied when trying to
install as a scheduled task in logged off mode.
Impact:
Teton driver installer.
Files:
BDrv5706Msm_*.ism
Change:
Installer will run the install API in system context.
3. Problem: ( Cont00025817 )
Silent Upgrade over T2.6b Gold Release Pops up Message
that Update is Successful
Cause:
Message is from T2.6b Gold MSI database when the old
product is being removed. Custom Action that shows
this message was not conditioned properly and got
executed during silent major upgrade.
Impact:
Teton driver installer.
Files:
BDrv5706Msm_*.ism
Change:
Call FixForUpgrade.exe to patch the T2.6b Gold database
before doing upgrade.
Enhancement:
===========
1. Change:
By request, changed ASF IP Monitor service name into:
"Broadcom ASF IP and SMBIOS Mailbox Monitor"
(Refer to Cont00025052)
Impact:
ASF Installer
Version 1.1.8 (July 2, 2006)
---------------------------------
Fixes:
===========
1. Problem: ( Cont00025503 )
MSM based Installer v9.05.01 Fails to Install NDIS
Client (nd50x v2.8.9) on Teton based NIC
Cause:
VBD Driver caused bus rescan during uninstallation
with multiple WSD enabled NIC, causing phantom
NDIS left behind.
Impact:
BDrv5706, BDrvInstaller, BMgmtInstaller, Umbrella
Files:
BDrv5706: BDrv5706Msm_*.ism,
BDrvInstaller: BDrvInstMSM_*.ism,
BMgmtInstaller: CustomActionMSM_*.ism
Changes:
1. BDrv5706: Call new API in BWinInst to disable
VBD before uninstall.
2. All installers: In case of reboot is needed
because disabling fails, condition unecessary
custom actions not to run after reboot. All
installers are affected because they are packaged
in umbrella.
2. Problem: ( Cont00022668 )
Canceled Mgmt Apps Setup May Leave SNMP in
a non-working state
Cause:
Installations involving drivers cannot be canceled
Impact:
All installers
Files:
All installers MSI project files
Changes:
Disable CANCEL button in the progress dialog
3. Problem: ( Cont00025482 )
Support Info for Teton Driver Installer Not
Consistent with Legacy Driver and Mgmt Apps Installers
Cause:
Teton installer missing custom actions to set
support info as other installers do.
Impact:
Teton installer
Files:
BDrv5706Msm_*.ism
Changes:
Added custom actions to set support info
Enhancement:
===========
1. Change:
In case of upgrade, if WSD node is present or
disabling child nodes fails, reboot and continue
to upgrade.
Impact:
Teton driver installer.
Version 1.1.7 (June 20, 2006)
---------------------------------
Enhancement:
===========
1. Change:
WSD Driver files are renamed to 8.3 format
Impact:
Teton driver installer.
Version 1.1.6 (June 9, 2006)
---------------------------------
Fixes:
===========
1. Problem:
Cont00025098 - Unselecting/Reslecting Bacs/basp causes
managment installer to not install chm help file
Cause:
CHM is a hidden subfeature under BACS, and does not get
selected if BACS is unselected and then implicitly reselected
by selecting BASP.
Impact:
Management installer, Umbrella installer
Files:
BMgmtInstaller.ism, Umbrella.ism
Changes:
Include CHM in BASP feature
2. Problem: Cont00025056 - Upgrading Teton driver installer from a flash
disk prompts the user for a 'Disk 1'
Cause:
Windows SourceList setting is pointing to the previous
source location
Impact:
Teton driver installer.
Files:
BDrv5706Msm_AMD64.ism, BDrv5706Msm_IA32.ism, BWinInst.dll
Changes:
1. BWinInst function BInstBRCMSetDrvSrcList was hard
coded for NetXtreme Driver Installer.
Use MsiSourceListAddSource with Product Code
property instead to make function generic.
2. Added Custom action to call BInstBRCMSetDrvSrcList API of
BWinInst.dll
3. Problem: If CIM is installed by 2 products, uninstalling
1 product will remove CIM all together.
Cause:
removal of CIM was done without checking if it
was used by more than 1 product.
Impact:
Management Installer and ASF Installer
Files:
BWinInst.dll
Changes:
Remove CIM only if it is installed by 1 product.
Enhancement:
===========
1. Change:
Added WSD and ISCSI drivers to Teton driver installer
Impact:
Teton driver installer.
Version 1.1.5 (May 25, 2006)
---------------------------------
Fixes:
===========
1. Problem:
Cont00024992 - BASP Link/Dependency to BACS in Mgmt Apps
Installer Does Not Install BACS
Cause:
Feature table was re-oraganized to fix some validation errors.
Impact:
Management installer.
Files:
BMgmtInstaller.ism
Changes:
Include BACS MSM in BASP feature
Version 1.1.4 (May 24, 2006)
---------------------------------
Fixes:
===========
1. Problem:
Cont00024895 - B57 driver installer fails
during the installation process.
Cause:
When we build the INF file name, the code was not prepared to
deal with W2k3 system as the check included only XP and w2k.
Impact:
NetXtreme driver installer.
Files:
BWinInst\service.cpp
Changes:
Reversed the INF file name check. If the platform is not AMD64
or IA64, we now assume the platform to be IA32 and build the
INF file name with full path.
2. Problem:
Cont00024860 - Teton Installer 9.02.02 - yellow bangs after
on 2nd installation with two 5708 cards
Cause:
When VBD is uninstalled after its child nodes, the devices
are enumerated, and caused phantom devices left behind after
uninstallation, which caused the problem on installation
onwards.
Impact:
Teton driver installer.
Files:
BWinInst\internal.cpp, BDrvInstMSM*.ism, BDrv5706MSM*.ism
Changes:
BWinInstl.dll: Skip enumeration when VBD is uninstalled
Installers: Call BInstScanForHardwareChanges before uninstall
3. Problem:
Cont00024941 - Mgmt Apps Installer v9.02.03 Does Not Install
SNMP Interface Agent Correctly
Cause:
Copy and paste error during migration from MSI based project.
Registry setting
[HKEY_LOCAL_MACHINE\SOFTWARE\Broadcom\Bcmif\CurrentVersion]
has the wrong entries.
Impact:
Management installer (IA32).
Files:
SnmpMsm_IA32.ism
Changes:
Corrected registry entry.
Version 1.1.3 (May 10, 2006)
---------------------------------
Fixes:
===========
1. Request:
CIM and SNMP are default selected. They should not be selected
by default.
Cause:
The install level for SNMP and CIM were put as 1 in the condition
when fixing validation error ICE79.
Impact:
BMgmtInstaller
Files:
BMgmtInstaller.ism
Changes:
Changed install level from 1 to 101 in conditions of SNMP & CIM.
2. Request:
BACS files were not removed after uninstall if previously
upgraded from version 7 of BMgmtInstaller.
Cause:
Component ID was changed from version 7 to version 8
while the keyfile remained the same.
Impact:
BMgmtInstaller
Files:
BacsMSM_IA32.ism
Changes:
1. unset bacs.exe as the key file
2. add new registry key under HKCU to be the key path
3. change shortcut to non-advertised and set the target to bacs.exe
3. Request:
BDrv5706 failed to install on W2K
Cause:
Condition of Installing NDIS custom action does not include W2K
Impact:
BDrv5706 Installer
Files:
BDrv5706Msm_IA32.ism
Changes:
Corrected the condition in custom action.
4. Request:
File extraction failed if temp folder name has an extra dot,
which caused the installation failed because DIFxAPI.dll is missing
from the temp folder.
Cause:
BWinInst.dll failed to handle this use case.
Impact:
BWinInst.dll
Files:
BWinInst\internal.cpp
Changes:
added support for the temp folder with an extra dot in the name.
5. Request:
Silent.txt not up to date with new product code.
Cause:
Impact:
All installers
Files:
Silent.txt files in all projects.
Changes:
Updated product codes.
Version 1.1.2 (April 20, 2006)
---------------------------------
Enhancement:
===========
1. Request:
Support changing MSI package file name in buildscript.
Cause:
Management installer has 2 different MSI package file names
depending on the product configuration.
Impact:
Buildscript, Management installer, Umbrella installer
2. Request:
Changed BACS uninstall registry to use product code property
instead of hard coded product code.
Cause:
Since the registry had hard coded the product code, it has
to be changed every time a major upgrade is done.
Impact:
Management installer BACS MSMs
Fixes:
===========
1. Request:
Matched component ID with old projects, shared components.
Cause:
For proper reference counting by Windows.
Impact:
All installers
Files:
All project files containing components
Changes:
ID and shared property of components
2. Request:
Moved Microsoft_DLL_IA32 component from BACS and SNMP
to standalone MSM.
Cause:
We are matching component ID and therefore we cannot have
2 MSMs using the same component ID (build error).
Impact:
Management installer, BACS MSM, SNMP MSM, Umbrella installer
Files:
BMgmtInstaller.ism, BacsMSM_IA32.ism, SnmpMsm_IA32.ism,
MicrosoftDllMsm_IA32.ism, BMgmtInstaller.xml,
Umbrella.ism, Umbrella.xml
Changes:
Moved the reference to Microsoft_DLL_IA32 component.
3. Request:
Changed product codes for major upgrade.
Cause:
Feature and component tables have been changed from
pre-MSM projects, so minor upgrade from the already
released softwares would fail.
Impact:
All installers
Files:
All MSI project files
Changes:
Product code
4. Request:
Old 5706 installer has only 1 cab files, while the new MSM
based 5706 installer has 4 cab files. It should only contain
1 cab file.
Cause:
Most projects uses "one cab per component" option for custom
compression, while the old 5706 installer uses "one cab per
feature" option.
Impact:
5706 driver installer
Files:
BDrv5706.ism
Changes:
change from "one cab per component" to "one cab per feature".
Version 1.1.1 (April 13, 2006)
---------------------------------
Enhancement:
===========
1. Request:
Moved BASP upgrade reboot message for Umbrella from
BMgmtInstaller to Umbrella project.
Cause:
Impact:
Management and umbrella installer.
Fixes:
===========
1. Request:
Custom action for upgrade BASP reboot message was never executed;
the existing message we saw after upgrade was actually from the
BASP removed custom action.
Cause:
Conditions for the custom actions were not correct.
Impact:
Management installer
Files:
CustomActionMSM_IA32.ism, CustomActionMSM_IA64.ism, CustomActionMSM_AMD64.ism
Changes:
Fixed the conditions for custom actions.
Version 1.1.0 (April 12, 2006)
---------------------------------
Fixes:
===========
1. Request:
CQ# 20614
Cause:
A registry was deleted after uninstallation.
Impact:
Teton driver installer.
Files:
BDrv5706.ism, BDrv5706Msm_AMD64.ism, BDrv5706Msm_IA32.ism
Changes:
Display reboot message after uninstallation.
Version 1.0.1 (March 29, 2006)
---------------------------------
Fixes:
===========
1. Request:
Changed MSI package name for NetXtreme driver installer.
Cause:
Regressed when creating new product config for
MSI/MSM split-up.
Impact:
NetXtreme driver installer.
Version 1.0.0 (March 29, 2006)
---------------------------------
Fixes:
===========
1. Request:
CQ# 24157
Cause:
Cancelling during uninstall causes uninstall issues in Golfers
Impact:
Management installer.
Files:
BMgmtInstaller.ism
Changes:
Cancel button is disabled once uninstallation is confirmed
and started. Cancelling in the middle of uninstallation
is not supported.
Enhancement:
===========
1. Request:
Extracted NetXtreme driver installer
functionality in to a separate MSM.
Cause:
MSI/MSM split-up.
Impact:
NetXtreme driver installer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.