debuglog.txt Driver File Contents (BIOS_Acer_1.10_A_A.zip)

Loading Setting....
[01]UpdateAddress[0x     0] UpdateLength[0x 20000]
[01]ProtectRange0Enable[1],ProtectRange1Enable[0],ProtectRange2Enable[0],ProtectRange3Enable[0]
[01]ProtectRange0BaseSector[   0],ProtectRange1BaseSector[  1e],ProtectRange2BaseSector[   0],ProtectRange3BaseSector[   0]
[01]ProtectRange0Length[ 4],ProtectRange1Length[ 2],ProtectRange2Length[ 0],ProtectRange3Length[ 0]
Loading ImageFile -->E08AC110.BIN
EC try enter reset mode !!!
CMD_READ_DEV_ID =[9f],Flash ID [0xC2][0x20][0x11] -> FlashPart : MX25L1005
Check Project ID pass from 0x00000100 -00000103 = [0x30][0x38][0x41][0x43]

Start Erase ROM ...

Start Address [0x0] Erase Size[0x20000] Sector#[0x20]

[01]ProtectRange0Length[ 4],ProtectRange1Length[ 2],ProtectRange2Length[ 0],ProtectRange3Length[ 0]
ProtectRange0Enable=1,ProtectRange0BaseSector=   0,ProtectRange0Length= 4

[ERASE]ProtectRange0Enable= 1,Protect index_sector=   0
[ERASE]ProtectRange0Enable= 1,Protect index_sector=   1
[ERASE]ProtectRange0Enable= 1,Protect index_sector=   2
[ERASE]ProtectRange0Enable= 1,Protect index_sector=   3
Erase finish,A2=00,A1=40,A0=00
Erase finish,A2=00,A1=50,A0=00
Erase finish,A2=00,A1=60,A0=00
Erase finish,A2=00,A1=70,A0=00
Erase finish,A2=00,A1=80,A0=00
Erase finish,A2=00,A1=90,A0=00
Erase finish,A2=00,A1=A0,A0=00
Erase finish,A2=00,A1=B0,A0=00
Erase finish,A2=00,A1=C0,A0=00
Erase finish,A2=00,A1=D0,A0=00
Erase finish,A2=00,A1=E0,A0=00
Erase finish,A2=00,A1=F0,A0=00
Erase finish,A2=01,A1=00,A0=00
Erase finish,A2=01,A1=10,A0=00
Erase finish,A2=01,A1=20,A0=00
Erase finish,A2=01,A1=30,A0=00
Erase finish,A2=01,A1=40,A0=00
Erase finish,A2=01,A1=50,A0=00
Erase finish,A2=01,A1=60,A0=00
Erase finish,A2=01,A1=70,A0=00
Erase finish,A2=01,A1=80,A0=00
Erase finish,A2=01,A1=90,A0=00
Erase finish,A2=01,A1=A0,A0=00
Erase finish,A2=01,A1=B0,A0=00
Erase finish,A2=01,A1=C0,A0=00
Erase finish,A2=01,A1=D0,A0=00
Erase finish,A2=01,A1=E0,A0=00
Erase finish,A2=01,A1=F0,A0=00
Start Write ROM ...
WriteCmd [0x2] Start Address [0x0] Write Size[0x20000] Sector#[0x20]Verify Flash ROM ok...

Update Flash ROM Complete...
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.88