+============================================================================+
NCQD1 Release Note
+============================================================================+
BIOS CORE Version ................ Insyde EFI 2.0
CPUs Supported ................ Intel Arrandale/Clarksfield 1067/800 MHz
Chipset ................ Intel Capella
Bridge ................ Intel Ibex Peak-M
Video ................ UMA / AMD
LCD Size ................ 15¡¨ TFT SWXGA
Memory ................ DDR3 800/1066/1333 MHz
HDD ................ SATA
ODD ................ SATA
PCMCIA ................ N/A
Card Reader ................ JMB380
1394 controller ................ N/A
Audio ................ HDA ALC670
LAN ................ BCM57780
KBC ................ ENE KB926
Clock Generator ................ IDT9LPRS3199/SLG8SP587
Super I/O ................ N/A
BIOS ROM Part ................ 2M: MX25L1605A. W25X16A. W25Q16BV. EN25F16. Atmel26DF161
4M: MX25L3205A. W25X32A. W25Q32BV. EN25F32. Atmel26DF321
Finger print ................
################################################################################
# #
# The "*" mark indicates that file has been modified in this version. #
# The "+" mark indicates that file has been added for issue fix. #
# The "-" mark indicates that file has been removed for some reason. #
# The ">" mark indicates that file has been replace file of folder #
# #
################################################################################
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 12/24/2009|
|------------------------------------------------------------------------------|
| Major Version : V1.02 |
| VGA BIOS(UMA) : 1914 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.010 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.006 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.033745.BR33745.001 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1194 |
| Clarksfield : 1.121 |
| Clar MRC/CSI Ver : 1.20 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3V |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : EA68h ¡V 2M |
| 08D3h ¡V 4M |
+==============================================================================+
1. Fix Power on Password default setting always is "Enable".
2. Flashit tool will show warning message when used /ME /BIOS /B command.
3. Add some new Panel.
4. Fix system can't pass MeManuf, when use EON EN25F32 ROM part(If test Memanuf need update vsccommn.bin to Memanuf tool)
5. Fix Madison driver no response when play movie.
6. Fix execute winflash but cancel after flash EC, it well auto reboot after shutdown.
7. S4 resume with Intel WLAN5100's aspm will wrong. 0x42-> 0x43.
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 12/15/2009|
|------------------------------------------------------------------------------|
| Major Version : V1.01 |
| VGA BIOS(UMA) : 1914 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.010 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.006 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.033745.BR33745.001 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1194 |
| Clarksfield : 1.121 |
| Clar MRC/CSI Ver : 1.20 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3V |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : F722h ¡V 2M |
| 158Dh ¡V 4M |
+==============================================================================+
1. Early to enable BT power to fix BT lost issue.
2. Fix Madison driver no response when play movie.
3. Modify extend completion timeout to "260 ms to 900" for Madison driver no response issue
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 12/01/2009|
|------------------------------------------------------------------------------|
| Major Version : V1.00 |
| VGA BIOS(UMA) : 1914 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.010 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.006 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.033745.BR33745.001 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1194 |
| Clarksfield : 1.121 |
| Clar MRC/CSI Ver : 1.20 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3V |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : 7532h ¡V 2M |
| 939Dh ¡V 4M |
+==============================================================================+
1. Disable IPS when I3 + discrete only and CFD cpu platform.
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 11/26/2009|
|------------------------------------------------------------------------------|
| Major Version : V0.08 |
| VGA BIOS(UMA) : 1914 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.010 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.006 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.033745.BR33745.001 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1194 |
| Clarksfield : 1.121 |
| Clar MRC/CSI Ver : 1.20 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3V |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : DE8Ah ¡V 2M |
| FCF5h ¡V 4M |
+==============================================================================+
1. Remove Detect VGA device to enable clockgen output 27MHz
2. Fix Logo test fail(Item:PCI Hardware Compliance Test For Systems)
3. Fix that changing boot sequence in boot page of SCU after pressing "Enter" key
4. Update Arrandale CPU Microcode ¡V CPUID: 20652 00000009
5. Modify USB intensity to "F5B"
6. Fix 80port Hang 0x17
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 11/19/2009|
|------------------------------------------------------------------------------|
| Major Version : V0.07 |
| VGA BIOS(UMA) : 1914 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.010 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.006 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.033745.BR33745.001 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1194 |
| Clarksfield : 1.121 |
| Clar MRC/CSI Ver : 1.20 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3V |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : 8ADEh ¡V 2M |
| A949h ¡V 4M |
+==============================================================================+
1. Fix in setupmenu IDE mode load default twice will show "HDD1 Password Is :" at Security form
2. Update switch graphics spec to improve battery life
3. Implement Linpus support.
Use EEPROM offset 0xE9 bit 1 to enable/disable SLP function.
4. Enable clockgen output 27MHz, when Madison and Park VGA device
5. Disable DPPM for Intel request
6. Add panel ID for LP156WH3-TLA1
7. Fix Can't find boot device when D2D exit.
8. Update ME FW 1194.
9. Update Clarksfield reference code V1.12 and Clarksfield MRC cod V1.20 to solve BSOD 0x7A and BSOD 0x116.
10. Fixed boot into OS slow when plug 5G / 6G Memory.
11. Update Madison VBIOS BR34756.010
Update Park VBIOS BR34808.006
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 11/10/2009|
|------------------------------------------------------------------------------|
| Major Version : V0.06 |
| VGA BIOS(UMA) : 1914 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.004 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.002 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.033745.BR33745.001 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1184 |
| Clarksfield : 1.10 |
| Clar MRC/CSI Ver : 1.12 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3V |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : 3995h ¡V 2M |
| 5C4Fh ¡V 4M |
+==============================================================================+
1. Active State Link PM Support L1&L0s
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 11/06/2009|
|------------------------------------------------------------------------------|
| Major Version : V0.05 |
| VGA BIOS(UMA) : 1914 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.004 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.002 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.033745.BR33745.001 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1184 |
| Clarksfield : 1.10 |
| Clar MRC/CSI Ver : 1.12 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3V |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : AEE3h ¡V 2M |
| D19Dh ¡V 4M |
+==============================================================================+
1. Fix after cold boot, enter into BIOS interfce or DOS mode, the USB Keybaord can not be used.
2. Fix WinFlash message can't select by internal KB/TP.
3. Fix BIOS security page "HDD Password Is: Froze" lost "n".
4. Fix Int15 tool can't detect WLAN card type.
5. Disable wake up function support for WLAN.
6. Update Park VBIOS BR34808.002
Rollback M96 VBIOS to BR33745.001
7. Fixed Acer Battery get "Current Capacity(WMI)" error, when BIOS return battery mode is (mwh) mode.
8. Fixed Doing "Discard Changes" first,then the action of clearing or modifying HDD password with pressing Esc button to exit discarding changes will cause "No bootable device".
9. Fix enter error HDD PSWD and select "system continue" will cause boot to USB device take a long time.
10. Fix Force shut down the unit, enter system show blue screen with code 0x124.
11. Remove SCU HPETSupport and HPETAddress item because ME need HPET High Precision Timer enable
12. Enable CFD CPU DMIBAR ASPM L1&L0s
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 10/29/2009|
|------------------------------------------------------------------------------|
| Major Version : V0.04 |
| VGA BIOS(UMA) : 1914 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.004 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.001 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.034867.BR34867.002 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1184 |
| Clarksfield : 1.10 |
| Clar MRC/CSI Ver : 1.12 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3V |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : 38EBh ¡V 2M |
| 5BA5h ¡V 4M |
+==============================================================================+
1. Default color engine enable.
2. Hold-down one of key with USB Keyboard and hotplug USB Keyboard will cause system hang up.
3. LPC revision ID has different between DOS and OS.
4. Fix DC mode set hddpasswrod select "exit save change" system will shut down but can't power on
5. Change ATI M96 VBIOS from BR34867.001 to BR34867.002
6. Modify SSID for SA's requirement
7. Implement Panel Type Hook to support LED and CCFL Panel.
8. Update EDS update Rev. 2170-002v1.0, Section 10.1.69
Update EDS update Rev. 2170-002v1.0, Section 10.1.70
Update EDS update Rev. 2170-002v1.0, Section 10.1.68
Update IPX Sighting Report Rev17 - #3218895 - USB Bus Turnaround Time
Disable IDE Redirect controller and Keyboard Text controller
9. Fix Int15 tool can't detect WLAN card type.
10. Fix when Supervisor Password(User Password) has been set, then clear the either of which, but do "Discard Changes" before exiting with saving changes, the password has been cleared actually
11. HDD PSWD Froze bit will be clear if run S4 with iMSM driver.
12. Change Intel VBIOS from 1890 to 1914.
13. Fix HDMI audio DTM UAA test fail.
14. Set clarksfield platfrom DMI ASPM to L1 on DMIBAR.
15. Fixed 8G install X64 OS very slow
16. Set color eng bit at ACPI Namespace.
17. Update of seamless USB feature.
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 10/15/2009|
|------------------------------------------------------------------------------|
| Major Version : V0.03 |
| VGA BIOS(UMA) : 1890 |
| AMD VBIOS(Madison) : ATI VGA VER012.014.000.003.034756 BR34756.004 |
| (Park) : ATI VGA VER000.000.000.000.034808.BR34808.001 |
| (M92 XT) : ATI VGA VER011.022.000.005.034820.BR34820.002 |
| (M96 Pro+): ATI VGA VER011.022.000.005.034867.BR34867.001 |
| Kernel Version : 03.59.33.1043 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1184 |
| Clarksfield : 1.11 |
| Clar MRC/CSI Ver : 1.10 |
| Auburndale : 1.00 |
| Aubr MRC/CSI Ver : 1.00 |
| Ibex Peak Version: 1.02 |
| PPM Version : 0.62 |
| IPS Version : 0.92 |
| VPRO Version : 0.90 |
| Flash Utility Ver : 1.3Q |
| Phase Status : C Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : 78BBh ¡V 2M |
| 9B75h ¡V 4M |
+==============================================================================+
1. Update VPRO reference code to V0.90
2. Update Arrandale reference code V1.00
3. Update IPS reference code V0.92
4. Modify Change HDD password will shutdown->restart
5. Modify DVMT PRE ALLOCATED SIZE to 128M for Acer's requirement
6. Update M96 VBIOS to BR34867.001.
7. Update Madison VBIOS to BR34756.004
8. Add M92 XT VBIOS BR34280.002
9. Press "Esc" key,post summary does not turn up.(Base on NAYF0-184)
10. S3 resume hang at 0xC9 first time after switch display mode in SCU.
11. Disable function key in F12 boot menu
12. The String under Logo don't change to "Please wait...", when press F2 too early.
13. Modify SSID for SA's requirement
14. Update Arrandale MRC code V1.00
15. Add AMD Park VGA support.
16. Update Madison VBIOS BR34756.004
17. Fix UMA SKU default display mode not be "iGPU"
18. Solution for solve after resume from S3, system reset need to input HDD password.(When install iMSM driver)
19. Update Arrandale Microcode ¡V CPUID 20652 00000008
20. S3 resume time larger then 2 secs, so remove some code for debug
21. Update ME 1184
22. Detect CPU Turbo support.
23. Disable Core temperature limit
24. adjust USB drive strength
25. Modify USB Overcurrent map
26. Modify Turbo control method
27. Fix Int15AutoTest.exe Fail For "Boot Sequence" Test
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 09/30/2009|
|------------------------------------------------------------------------------|
| Major Version : V0.02 |
| VGA BIOS(UMA) : 1890 |
| AMD VBIOS(Madison) : ATI VGA VER012.012.000.002.034145.TS2 |
| Kernel Version : 03.59.33.1042 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1183 |
| Clarksfield : 1.11 |
| Clar MRC/CSI Ver : 1.10 |
| Auburndale : 0.80 |
| Aubr MRC/CSI Ver : 0.90 |
| Ibex Peak Version: 1.01 |
| PPM Version : 0.61 |
| IPS Version : 0.91 |
| Flash Utility Ver : 1.3Q |
| Phase Status : B Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : 26AFh ¡V 2M |
| 2A5Bh ¡V 4M |
+==============================================================================+
1. Update kernel to 1042.
2. Modify Verbtable for SA require
3. Update Power saving code for PM Check list V2.0
4. Fixed Nvidia VGA + 4G RAM will take long time during OS loading bar.
5. Implement color engine function and update Panel ID table.
6. Fix HDMI Audio lost for Arrandale CPU
7. Fix Fn+F5 can't switch display mode when system is under clone mode w/o launch manager
8. Fix after discarding ¡§Set Supervisor/User/Hdd Passwords¡¨, these passwords have existed
9. Solution for system occur event log ID12 after first time S3 resume
10. When resume from S4, system will show F2 string.
11. Fix "Press USB Keyborad or Mouse during entering S4 process, system will auto resume and OS LED is abnormal".
12. Update Clarksfield Reference code V1.11 and remove Payload size workaround.
13. Update Madison VBIOS to 034145.TS2.
14. Update ME FW to 1183.
+==============================================================================+
| MODEL NO. : NCQD1 RELEASE DATE : 09/18/2009|
|------------------------------------------------------------------------------|
| Major Version : V0.01 |
| VGA BIOS(UMA) : 1854 |
| AMD VBIOS(Madison) : ATI VGA VER012.012.000.002.034145.BR34145.006 |
| Kernel Version : 03.59.29.1033 |
| ME Version : 6.0.0.1126 |
| 6.0.0.1174 |
| Clarksfield : 1.10 |
| Clar MRC/CSI Ver : 1.10 |
| Auburndale : 0.70 |
| Aubr MRC/CSI Ver : 0.80 |
| Ibex Peak Version: 1.01 |
| PPM Version : 0.60 |
| IPS Version : 0.91 |
| Flash Utility Ver : 1.3Q |
| Phase Status : B Build |
| Clock Generator(discrete): |
| ICS3199 : 001,004,080,021,017,000,000,001,000,005,003,000 |
| SLG587 : 001,000,080,000,076,000,000,006,000,005,003,000 |
| Checksum (FD) : 19C2h ¡V DVT 4M |
| 19BBh ¡V DVT2 2M |
| 050Fh ¡V DVT2 4M |
+==============================================================================+
Base on NCQD0 BIOS V1.00
1. Add eject item for new card device when new card is USB type.
2. Fix system will blue screen after resume from s3 if set HDD PSWD
3. Fix BT LED will always light in setup menu.
4. Fix Cold/warm boot to do S3 resume occur error event Log ID:12 in Win7 first time
5. Fix flash BIOS no check model name
6. Correct GPIO33 CMD
7. Update Madison VBIOS to BR34145.006
8. Update Arrandale MRC code and Reference code.
9. Update UMA VBIOS to 1854
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.