Filename : KBAARELS.TXT
Release Notification
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 1.02A) 12-24-2009
File name : K9BA102A.ROM
Base on : K9BA101A.ROM
Checksum : 62C6
Notification:
Fixed:
Add Function:
1.> ADD New Panel and modify brightness Table.
Modify:
1.> Update Common Code V57([L09102701]).
Keep Battery capacity to 50%.
2.> Update Common Code V57([L09100803])
Issue: Keyboard lock by 0xED CMD.(PS. only modify comment)
3.> Update Common Code V57([L09102901])
Fix BEEP pin leakage issue in S4/S5.
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 1.01A) 12-10-2009
File name : K9BA101A.ROM
Base on : K9BA100A.ROM
Checksum : 746E
Notification:
Fixed:
Add Function:
Modify:
1.> Update Common Code V57([L09102701]).
Keep Battery capacity to 50%.
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 1.00A) 12-01-2009
File name : K9BA100A.ROM
Base on : K9BA008A.ROM
Checksum : 746C
Notification:
1.> this version only use in PVT unit.
Fixed:
1.> Rename to Golden.
Add Function:
Modify:
1.>
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.08A) 11-25-2009
File name : K9BA008A.ROM
Base on : K9BA007A.ROM
Checksum : 747A
Notification:
1.> this version only use in PVT unit.
Fixed:
1.> Fix Color Boost OSD icon can't meet user behavior.(CCIC022)
Add Function:
Modify:
1.>
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.07A) 11-10-2009
File name : K9BA007A.ROM
Base on : K9BA006A.ROM
Checksum : 5A9E
Notification:
1.> this version only use in PVT unit.
Fixed:
1.> Fix CIR remote control can't turn on system in AC only mode.
Add Function:
Modify:
1.>
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.06A) 11-10-2009
File name : K9BA006A.ROM
Base on : K9BA005B.ROM
Checksum : 5A9E
Notification:
1.> this version only use in PVT unit.
Fixed:
Add Function:
Modify:
1.> Modify thermal Communication fails Shutdown time to 300 Sec.
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.05B) 11-06-2009
File name : K9BA005B.ROM
Base on : K9BA005A.ROM
Checksum : E5DA
Notification:
1.> this version only use in PVT unit.
Fixed:
1.> Fix thermal Communication fails Shutdown in BIOS Flash.
Add Function:
Modify:
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.05A) 11-05-2009
File name : K9BA005A.ROM
Base on : K9BA004A.ROM
Checksum : E5C8
Notification:
1.> this version only use in PVT unit.
Fixed:
1.>
Add Function:
1.> Thermal Control Table_20091103_v11
(Add Thermal Communication Shutdown)
2.> Cypress Sensor wackup function in SMBus fails.
Modify:
1.> Modify Color Engine Button On/off ScanCode.
On: (Set2 Make/break,0xE0,0x43/0xE0,0xF0,0x43).
Off:(Set2 Make/break,0xE0,0x44/0xE0,0xF0,0x44)
2.> Modify Panel ID Function.
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.04A) 10-30-2009
File name : K9BA004A.ROM
Base on : K9BA003A.ROM
Checksum : 1917
Notification:
1.> this version only use in PVT unit.
Fixed:
1.> Cmd 52 A3 return EC Chip type 0x48 to 0x47.
Add Function:
1.> ADD Color Engine Button On/off ScanCode.
On: (Set2 Make/break,0xE0,0x18/0xE0,0xF0,0x18).
Off:(Set2 Make/break,0xE0,0x20,0xE0,0xF0,0x20)
2.> New Panel ID Function.
3.> Thermal Control Table_20090928_v9.
Modify:
1.> Modify ENE Sensor Button's sensitivity.
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.03A) 10-16-2009
File name : K9BA003A.ROM
Base on : K9BA002A.ROM
Checksum : BDA5
Notification:
1.>
Fixed:
1.>
Add Function:
1.> CIR Power Button boot to IO Arcade.
2.> ADD Color Engine Button Test ScanCode(Make/break,0xE0 0x5F/0xE0 0xF0 0x5F).
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.02A) 09-30-2009
File name : K9BA002A.ROM
Base on : K9BA001A.ROM
Checksum : A6AD
Notification:
1.> Rename.
Fixed:
1.>
Add Function:
1.>
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.01A) 09-18-2009
File name : K9BA001A.ROM
Base on : K9BA001A.T01
Checksum : A6AB
Notification:
1.>
Fixed:
1.> Fix S3 wakeup fail in immediately enter S3 after boot finish.
Modified:
1.> Modify Cmd 45 10/11 ME_EN on/off setting.
2.> Modify CPU PCH GMCH VGA temp address to fit Cecte tools.
3.> Cancel LLC shut down voltage.
4.> CPU turbo function will reference CPU and VGA temp.
5.> Modify Cypress Sensor Button's sensitivity.
Add Function:
1.> Add IndexIO Function to support ENE Winflash tools.
2.> Add over temp shutdown reference PCH temp function.
3.> Add Acer Common Code fix IO Arcade can not exit by pressing
power button when enter the mode within 1min.
And remove WorkRun Code.
**************************************************************************
NCQD1 ENE KB926 EC-FW release (Rev. 0.01 T01) 09-07-2009
File name : KBAA001A.T01
Base on : K9BA100D
Checksum : 1537
Notification:
1.> Need flash EC's boot block? --> Yes
2.> Code Base: NCQD0 V1.00D
Fixed:
Known issue:
Modified:
1.> Modify the name, ID and version of project.
1.> Modify Cypress Sensor Button Function to Support SB3534.
Add function:
**************************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.