/** \file * * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ /** \mainpage Test Application for the LUFA library * * \section SSec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * * <table> * <tr> * <td><b>USB Mode:</b></td> * <td>Host/Device (Dual Role)</td> * </tr> * <tr> * <td><b>USB Class:</b></td> * <td>N/A</td> * </tr> * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> * <tr> * <td><b>Relevant Standards:</b></td> * <td>N/A</td> * </tr> * <tr> * <td><b>Usable Speeds:</b></td> * <td>Low Speed Mode, Full Speed Mode</td> * </tr> * </table> * * \section SSec_Description Project Description: * * Test application. Demonstrates several aspects of the LUFA * Library. On start-up the current temperature will be printed * through the USART every 10 seconds, and the current joystick * position will be indicated via the LEDs on the selected board. * Pressing the HWB will initiate the USB subsystem, enumerating * the device (which has <b>no actual functionality beyond * enumeration as a device or as a host in this demo</b>, and serves * only to demonstrate the USB portion of the library). * * Pressing the HWB a second time will turn off the USB system. * * When activated, the USB events will be printed through the * serial USART. * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> * <tr> * <td> * None * </td> * </tr> * </table> */Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.