readme.txt Driver File Contents (9528932.exe)

Information and Instructions about this download file
=======================

File Description: Marvell Yukon 88E8052 PCI-E ASF Gigabit Ethernet Controller driver
Version: 7.21.1.3
Operating System: Microsoft(r) Windows(r) XP
Part Number: 9528931
Date: 08/19/2004
=======================


Table of Contents
=======================
Overview
Identification
Installation
Removal 		
Troubleshooting
Reason for Update
Applicable Part Numbers
=======================


Overview

This document describes the steps necessary to install the Gateway Profile 5.5 integrated network drivers in Windows XP.


Identification

If you have a Gateway Profile 5.5 and are running Windows XP, install these drivers.


Installation

1.  Download the file to the desktop.

2.  On the desktop, double-click the 9528931.exe file.  The needed files are expanded to the C:\Cabs\9528931 folder.

3.  From the Start menu, click Control Panel. 

2.  In Control Panel, click Performance and Maintenance.

3.  In Performance and Maintenance, click System.

4.  In the System Properties dialog box, click the Hardware tab, and then click Device Manager.

5.  In Device Manager, double-click Network adapters.

6.  Under Other devices, double-click Marvell Yukon 88E8052 PCI-E ASF Gigabit Ethernet Controller.

7.  Click the Driver tab and then click Update Driver.

8.  Select "No, not this time" to have Windows connect to Windows Update and click Next.

10.  Select Install the software automatically and click Next.

11.  The update wizard will locate the driver automatically.  Click Finish to complete the installation.



Removal

1.  From the Start menu, click Control Panel. 

2.  In Control Panel, click Performance and Maintenance.

3.  In Performance and Maintenance, click System.

4.  In the System Properties dialog box, click the Hardware tab, and then click Device Manager.

5.  In Device Manager, double-click Network adapters.

6.  Under Network adapters, double-click Marvell Yukon 88E8052 PCI-E ASF Gigabit Ethernet Controller.

7.  Click the Driver tab, and then click Uninstall.

8.  Click OK to continue.  The removal proceeds automatically.


Troubleshooting

1.  Run Network Diagnostics to help determine the network configuration difficulty.

 a.  From the Start menu, point to All Programs, Accessories, System Tools, and then click System Information. 
 b.  In the System Information window, from the Tools menu, click Net Diagnostics.
 c.  In the Help and Support Center window, click Scan your system.
 d.  The results are shown.  Click the plus sign (+) next to Network adapters for additional information. 

2.  Verify whether the link light on the back of the network card is lit.  If not, reseat the cable.  If the light is still not lit, check the cable and the port on the hub or contact your network administrator.

3.  Download the file again, and then perform the installation steps.


Reason for Update

This is the initial release of the Profile 5.5 integrated network driver.  


Applicable Part Numbers

Profile 5.5: 3501887, 4000960

Profile 5.5 Motherboard: WME4000960 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.25