Available on the Web at www.gateway.com/support are the following: technical support for Gateway products, live chat with a Gateway Trusted Guide, files for downloading, and e-mail support. ======================= File Description: Showall DMI Utility Version: Not Applicable Operating System: Not Applicable Part Number: Showall Date: 08/21/2001 ======================= Table of Contents ======================= Overview Identification Installation Removal Troubleshooting Reason for Update Applicable Part Numbers ======================= Overview This document describes the steps necessary to retrieve the serial number for the Solo(r) 9500 portable computer. Identification If you have a Solo 9500 and are not able to find your serial number and need it for identification, use this file. Installation 1. Insert a blank, formatted floppy disk into your floppy disk drive. 2. Browse to the folder where the file was downloaded, and then double-click Showall.exe. 3. In the Win Zip Self-Extracting dialog box, accept the default location for extraction, A:\. Click Unzip. This extracts the files to your blank, formatted disk. 4. After the extraction process is complete, click OK. The disk now contains files that allow the computer to start to the disk. 5. From the Start menu, click Shutdown, and then select the option to restart the computer. 6. The computer starts to an A:\ prompt. 7. At the A:\ prompt, type: Showall.exe. Press the ENTER key. 8. Under the System Information Category, the computer shows the serial number. Next to Serial Number (SS) is the computer's serial number. Removal There is no removal procedure for this utility. Troubleshooting If you have difficulty running this utility, verify that you are running it on a Gateway Solo computer. Reason for Update This is the initial release of the utility. Applicable Part Numbers The part numbers for the Solo 9500 are 3500845, 3500846, and 3500847.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.