WARNING:
ONLY LOAD THIS BIOS ON A "SOLO" P5-75, P5-90, P5-100, P5-120, OR P5-133.
LOADING ON ANY OTHER SYSTEM WILL RUIN THE SYSTEM.
Instructions on updating the BIOS:
1. Go to a "C" prompt in DOS and press the FN+ALT+DEL keys simultaneously to reboot the
system.
2. When the message "Starting MS-DOS..." is displayed on the LCD screen, press the F5 key.
This will bypass your autoexec.bat and config.sys files, booting the system clean.
Note-if your Solo is running "Windows 95" When the message "Starting Windows 95..."
is displayed on the LCD screen, press the F8 key. Then arrow down to "Safe mode
command prompt only" and press enter.
3. Put the floppy disk in drive A, type A: and press enter.
4. At the "A" prompt, type the word BIOS112.EXE and press enter.
5. The system will now begin to update the BIOS.
6. After the system BIOS is updated, the system will reboot with the updated BIOS.
7. When the system reboots you may get a message that says "Non-system disk or disk error.
Replace and press any key when ready." If this occurs, remove the floppy disk from
the "A" drive and press enter.
8. The BIOS should now be successfully installed.
Applicable Part Numbers:
3500436, CHSCBK007AAWW, CHSCBK009AAWW, CHSCBK010AAUS, CHSCBK010AAWW,
CHSCBK010ABUS, CHSCBK010ACUS, CHSCBK010ADWW, CHSCBK010AEWW, CHSCBK010AFWW, CHSCBK010AGWW, CHSCBK010AHWW, CHSCBK012AAUS, CHSCBK012ABUS, CHSCBK012ACUS, CHSCBK014AAWW, CHSCBK015AAWW,
CHSCBK015ACWW, CHSCBK019AAUS, CHSCBK019AAWW, CHSCBK020AAUS,
CHSCBK021AAUS, CHSCBK022AAUS, CHSCBK023AAUS, CHSCBK023AAWW,
CHSCBK024AAUS, CHSCBK024AAWW, CHSCBK024ACUS, CHSCBK024ADUS, CHSCBK024AEUS, CHSCBK025AAUS, CHSCBK025ACUS, CHSCBK025ADUS, CHSCBK025AEUS, CHSCBK026AAUS, CHSCBK026ACUS, CHSCBK027AAUS,
CHSCBK027ACUS, CHSCBK028AAWW, CHSCBK029AAWW, CHSCBK030AAWW, CHSCBK031AAWW, CHSCBK032AAUS, CHSCBK032ACUS, CHSCBK033AAUS, CHSCBK033ACUS, CHSCBK033ADUS, CHSCBK033AEUS, CHSCBK034AAWW,
CHSCBK035AAWW, CHSCBK036AAUS, CHSCBK037AAUS, CHSCBK038AAUS,
CHSCBK038ABUS, CHSCBK038ACUS, CHSCBK038ADWW, CHSCBK040AAUS,
CHSCBK040ABUS, CHSCBK040ACUS, CHSCBK041AAUS, CHSCBK041ABUS,
CHSCBK041ACUS
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.