Information and Instructions about this download file ======================= File Description: ECS nBTX NIC Firmware Version: 5787Ac3.23 & 5787Am3.23 Operating System: Microsoft(r) Windows(r) XP Part Number: ECSNICFIRM v1.1 Date: 08/30/2007 ======================= Table of Contents ======================= Overview Identification Installation Removal Troubleshooting Reason for Update Applicable Part Numbers ======================= Overview This document describes the steps necessary to upgrade to NIC firmware version 5787Ac3.23 for the ECS nBTX motherboard. Identification This NIC firmware can be installed on a ECS nBTX motherboard, part number 4006183R. Installation The NIC firmware should be flashed if: 1. You are updating to a newer NIC firmware revision. 2. A technician has told you to flash or re-flash the computer. Note: Please verify the CD burner software that you have on your computer before using the bootable CD options below. Steps to flash or re-flash the computer using a CD burner drive: 1. Use your burning software to Burn Disc Image of the C:\Cabs\ECSNICFIRM\ECSNICFIRM.ISO file to a blank CD. 2. After creating the bootable CD, place the CD in the CD/DVD drive, and then restart the computer. 3. At the Menu, select 1 for firmware version 5787Ac3.23. The BIOS flash process runs automatically. Do not press any keys or turn off the computer during this process. 4. When the flash is complete it will run a test to verify the card. Steps to flash or re-flash the computer using a floppy disk drive or bootable USB flash drive: 1. Copy all of the BIOS files except ECSNICFIRM.ISO from the C:\Cabs\ECSNICFIRM folder to a blank floppy disk or a USB flash drive. 2. Restart the computer with the floppy disk inserted/USB flash drive plugged in. 3. At the menu, select 1 for firmware version 5787Ac3.23. The firmware flash process runs automatically. Do not press any keys or turn off the computer during this process. Removal Because a computer must have a BIOS to operate, there is no removal process. The firmware cannot be removed after it has been upgraded. Troubleshooting If you have trouble flashing the firmware, try the process again following the steps listed in the Installation section of this document. If you are still unable to flash the BIOS, verify that you are actually attempting to flash the NIC firmware on an ECS nBTX motherboard. If this process still fails, contact technical support. Reason for Update This firmware fixes an issue with the inability to save changes to Broadcom NIC settings. Applicable Part Numbers E-series: 1014207R, 1014208R, 1014206R Motherboards: 4006184RDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.