Information and Instructions about this download file ======================= File Description: Broadcom 802.11g Wireless Network Card Driver Revision: 3.30.15 Operating System: Microsoft(r) Windows(r) XP, Windows 2000 Driver Part Number: 9526044 Driver Date: 02/12/2004 ======================= Table of Contents ======================= Overview Identification Installation Program Use Removal Troubleshooting Reason for Update Applicable Part Numbers ======================= Overview This document describes the steps necessary to install and configure the Windows XP or Windows 2000 Broadcom 802.11g network adapter driver for the Gateway computer models listed in the Applicable Part Numbers section below. Identification If you have a Gateway computer model listed in the Applicable Part Numbers section below and are running Windows XP or Windows 2000, install these drivers. Installation Download and double-click the file (9526044.exe). Files self-extract and copy into the C:\Cabs\9526044 folder on the hard drive. 1. From the Start menu, click Run. 2. In the Run dialog box, type: C:\Cabs\9526044\Setup.exe. Click OK. 3. In the Welcome dialog box, click Next. 4. The driver installs. 5. In the InstallShield Wizard Complete dialog box, click Finish. 6. Click Finish to restart the computer. Removal Windows XP 1. From the Start menu, click Control Panel. 2. In Control Panel, double-click Add or Remove Programs. 3. In the Add or Remove Programs window, select BCM Wireless Network Adapter, and then click Change/Remove. 4. In the Confirm Removal dialog box, click OK. 5. The driver files remove. 6. Close Add or Remove Programs. 7. In Control Panel, double-click the System icon. 8. In the System Properties dialog box, click the Hardware tab. On the Hardware tab, click Device Manager. 9. In Device Manager, select Broadcom 802.11g Network Adapter, and then on the Driver tab, click Uninstall. Windows 2000 1. From the Start menu, click Settings and then Control Panel. 2. In Control Panel, double-click Add/Remove Programs. 3. In the Add/Remove Programs window, select BCM Wireless Network Adapter, and then click Change/Remove. 4. In the Confirm Removal dialog box, click OK. 5. The driver files remove. 6. Close Add/Remove Programs. 7. In Control Panel, double-click the System icon. 8. In the System Properties dialog box, click the Hardware tab. On the Hardware tab, click Device Manager. 9. In Device Manager, select Broadcom 802.11g Network Adapter, and then on the Driver tab, click Uninstall. Troubleshooting If you are having difficulty during or after the driver installation, follow the removal procedure, and then reinstall the drivers. Reason for Update This utility supports required Windows wireless OIDs for zero configuration and administration. Applicable Part Numbers Gateway 610 Media Center: 2900005, 2900006, 2900007, 2900209, 2900210, 2900211 Gateway M305CRV: 3501715, 3501717, 3501719, 3501721, 3501782, 3501783 Gateway M350WVN: 3501666, 3501668, 3501673, 3501675, 3501677, 3501678, 3501802, 3501803, 3501804, 3501805, 3501863 Gateway 450RGH: 3501799, 3501810, 3501811, 3501812, 3501821, 3501822, 3501823, 3501824, 3501949, 3501950, 3501951, 3501952, 3501953, 3501954, 3501955, 3501956 Gateway 450ROG: 3501353, 3501354, 3501355, 3501356, 3501751, 3501752, 3501753, 3501946, 3501947, 3501948 Gateway 400VTX: 3501331, 3501335, 3501337, 3501341 Gateway 600YG2: 3501372, 3501373, 3501379, 3501380, 3501509, 3501510, 3501681, 3501683 Gateway M675PIR: 3501731, 3501732, 3501765 Gateway M675PRR: 3501839, 3501840, 3501841, 3501842, 3501843 Gateway M275: 3501734, 3501735, 3501736, 3501737, 3501781 Profile 5: 2900068, 2900069, 2900070, 2900071, 2900072, 2900074, 2900075, 2900076, 2900077, 2900078, 2900079, 2900080, 2900081, 2900082, 2900083, 2900084, 2900085, 2900086, 2900087, 2900196, 2900262, 2900272, 2900283, 2900398, 2900400, 2900402, 2900404, 2900511, 3501738, 3501739, 3501740, 3501818, 3501819, 3501820 Profile 5.5: WME4000960Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.