===================================================================
Agere Systems SR02-2.1
NDIS 5 Miniport Driver for MS Windows 2000
Variant 2 Version: 7.82
===================================================================
This README.TXT covers information that was not yet known or
available when the user documentation shipped with this product
was written. It includes update information, additional
installation instructions, limitations to the current version of
the product, and suggestions to solve known issues or problems.
TABLE OF CONTENTS.
1. SOFTWARE DESCRIPTION
2. SYSTEM REQUIREMENTS
3. NEW IN THIS RELEASE
4. INSTALLATION NOTES
5. TECHNICAL CONSTRAINTS
6. KNOWN ISSUES
7. TECHNICAL SUPPORT
-------------------------------------------------------------------
1. SOFTWARE DESCRIPTION
1.1 About this software
This Driver supports the following network interface cards:
* "Wireless PC Card Model 0104"
* "Wireless PC Card Model 0106"
* "Wireless Integrated Card Model 0202"
* "Wireless Embedded Card Model 0504"
* "Wireless PCI Adapter Model 0901"
* "Onair PC Card (INT)"
* "Onair PC Card (EMB)"
* "Avaya Wireless PC Card"
* "NCR WaveLAN/IEEE PC Card"
* "D-Link Air DWL-660 Wireless PC Card"
* "ELSA AirLancer MC-11"
* "ELSA Vianect WLAN MC-11"
* "LANCOM Systems AirLancer MC-11"
* "RoamAbout 802.11 DS"
* "RoamAbout 802.11 DS (Enterasys)"
* "IBM High Rate Wireless LAN PC Card"
* "IBM High Rate Wireless LAN Mini PCI Card"
* "IBM Internal High Rate Wireless LAN PC Card"
* "SKYWARD PC Card"
* "Joynet WLAN PC Card"
* "ORiNOCO PC Card (5 volt)"
* "ORiNOCO Mini PCI Card"
* "ORiNOCO Integrated Card"
* "ORiNOCO PCI Card"
* "Toshiba Wireless LAN Card"
* "Toshiba Wireless LAN Mini PCI Card"
* "Samsung SEW-2001p Card"
* "Samsung SEW-2001m Card"
* "I-GATE 11M PC Card"
* "connect2AIR WLAN E-1100 PC-Card"
* "2Wire Wireless PC Card"
* "WLAN PC Card"
* "WLAN Integrated Card"
* "WLAN Embedded Card"
1.2 Files Installed
The following files will be installed in the Windows designated
directory:
NDIS 5 Miniport driver for Windows 2000 version 7.82
WLAGS48B.SYS
WLAGS48B.INF
WDAGS48B.DLL
WCAGS48B.EXE
WNAGS48B.CPL
WAAGS48B.DLL
WFAGS48B.SYS
WNAGS.HLP
WNAGS.CNT
-------------------------------------------------------------------
2. SYSTEM REQUIREMENTS
2.1 Operating System
This Driver is for the Microsoft Windows 2000 Operating System.
-------------------------------------------------------------------
3. NEW IN THIS RELEASE
3.1 Version 7.82 SR02-2.1
* Wake On LAN (WOL) functionality has been added to the
drivers for the PCI adapter.
To be able to work with WOL following settings must be
applied (XP):
1. Advanced Power management ON
2. Wake On Lan ON
3. Allow this device to wake up the computer ON
WOL reacts on so-called magic packets only.
* Improved firmware version 8.72 for station and AP is
embedded in the driver.
3.2 Version 7.62 SR02-1
* Introduction of driver variants
Variant 2 has been defined for two purposes:
1. to identify NDIS 5.1 drivers (NDIS 5.0 has variant 1)
Note that NDIS 5.0 and NDIS 5.1 are covered by NDIS 5
2. to identify NT4 Softex drivers (NT4 has variant 1)
Variant 2 drivers have a 'B' appended to the filenames
listed above.
Future variant 3 will have a 'C' appended.
Variant 1 has no 'A' appended.
* For each OS a multi-brand INF file is generated.
As the name suggests, a multi-brand INF file contains
the card characteristics of various brands.
Multi-brand must not be confused with Combined, the latter
representing the card characteristics on various OS’es
for one brand.
* Various inconveniences w.r.t. Japanese help files
and screen texts have been resolved
* Stability issues have been resolved for
the Control Panel Applet
* Firmware 8.42 is used in the driver.
- Initial value for CurrentTXRate is 11 Mbps i.s.o. 2 Mbps.
- Led behaviour has been modified:
Power led off: radio disabled
Power led continuously on: radio enabled
Power led flickers every 100 ms: radio enabled and
power management ON
Activity led off radio disabled
Activity led flickers once per 10s: radio enabled
but no network found
Activity led flickers every 100 ms: radio enabled and
Rx/Tx activity
3.3 Version 7.42 Winter 2002
* Added support for
- 802.1x authentication
- Ultra high density
- Promiscuous mode
- PCI Adapter Card
* Extended functionality of Control Panel Applet
The Control Panel Applet has been extended such that it
supports multiple cards to be configured in a single
system.
* Agere-ization has been performed, involving
replacement of Lucent-related texts to Agere equivalent.
3.4 Version 7.08 Fall 2001
* Correct problem: Control Panel Applet does not accept
hexadecimal coded encryption keys.
3.5 Version 7.06 Summer 2001
* Added Firmware as part of the driver.
* Changed ControlPanel to Wizard style
* Added Enhanged PowerManagement
3.6 Version 6.28 Winter 2001
* Added functionality for enabling/disabling radio from the
Client Manager
* Putting 'ANY' in a peer-to-peer profile gives a apropriate
warning.
* Profiles can now be selected trough the keyboard.
-------------------------------------------------------------------
4. INSTALLATION NOTES
4.1 Standard Installation
Please refer to the 'Getting Started Guide' or 'User's
Guide' that came with your product.
-------------------------------------------------------------------
5. TECHNICAL CONSTRAINTS
5.1 Compatibility with Station Functions Firmware on the Card.
This version of the driver requires the Station Functions
firmware on the Card to be version 6.04 or higher.
-------------------------------------------------------------------
6. KNOWN ISSUES
None.
-------------------------------------------------------------------
7. TECHNICAL SUPPORT
7.1 Finding Information
On the Agere Systems Web Site you can find the most recent
device drivers, bridge firmware, software updates and
user documentation.
World Wide Web: HTTP://WWW.AGERE.COM or
FTP://FTP.AGERE.COM
7.2 Contact Technical Support
If you encounter problems when installing or using this
product, or would like information about our other
"Wireless" products, please contact your local Authorized
"Wireless" Reseller or Agere Systems Sales office.
Addresses and telephone numbers of the Agere Systems
Sales offices are listed on our Agere Systems Web Site.
Help us Helping you!
When contacting Technical Support, please use the Problem
Report (report.txt) and send it to us by Fax or E-Mail.
A completed Problem Report Form that includes the details about
your "Wireless" product and its host environment will help us
helping you to solve your problems.
===================================================================
END OF FILE
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.