krelease.txt Driver File Contents (Lan_Broadcom_12.2.1.1_W7x64_A.zip)

                          ============================
                           R E L E A S E    N O T E S
                          ============================

                       Broadcom NetLink (TM) Gigabit Ethernet Driver
                For Windows 2003  32/64 bit versions, Windows XP 32/64 bit,
                          Windows 2000, Windows ME, Win98/SE.

                  Copyright (c) 2000-2009 Broadcom Corporation
                               All rights reserved.


Version 12.2.0.3A  May 31, 2009
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ41522 - Remove Mazama (5785) support from 12.2 Gold drivers
      Change:
        Make inf change to remove 5785 2 part IDs.
      Impact:
        None.


Version 12.2.0.3  May 29, 2009
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ41508 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs


Version 12.2.0.2  May 14, 2009
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ40985, CQ41039, CQ41120 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  2.  Request:
        Driver needs to disables L1 PLL power down when Ethernet link is 10 half duplex or 100 half duplex,
        in additional to disabling CLKREQ.
      Change:
        Set bit 7 (L1 PLL Powerdown Disable) of MAC register 0x7d54 for 10H and 100H.


Version 12.2.0.1  May 04, 2009
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ40363 - Disable Greenmode in driver INF in Release 12.0 for all OEM systems
      Change:
        Make inf changes as request to disable GreenMode for specific OEM systems.
      Impact:
        None.

  2.  Request:
        CQ40246, CQ40529, CQ40557, CQ40728, CQ40866 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  3.  Request
        CQ40377 - For Release 12.2, Please Update Product_Version String for NDIS 5.1 and later Drivers to 14.1.0
      Change:
        Change the product version as required.
      Impact:
        None

  4.  Request:
        CQ40446 - Support new PNP IDs for 10/100 and 1G 5785 devices
      Change:
        Added new IDs

  5.  Request:
        Enhance OTP programming reliability.
      Change:
        Driver needs to implement the following steps whild doing OTP program.
        1) To use external clock for the programming.
        2) Try to reprogram OTP bit up to 16 times if the OTP is stuck at 0.
        3) Do OTP init command immediately after a OTP write.


Version 12.2.0.0  Apr 02, 2009
----------------------------------------
  1.  Problem:
        CQ39724 - WLK 1.3 NdisTest 6.5 BSOD on WinXP 64-bit Platform.
      Cause:
        Driver doesn't wait/collect for all RX packet desciptors during handling reset routine,
        in NDISTest "reset" test, this leads to the NULL pointer reference during freeing
        resource when driver is unloaded in the beginning of NdisTest "Addresschange" test.
      Change:
        Make driver to wait/collect for all Rx packet descriptors in UM_Reset().
      Impact:
        None.

  2.  Problem:
        CQ40046 - (5785) AC131: No link up while disable/enable using cable unplug/plug.
        CQ39903 - (5785) AC131: AUT set to auto-speed does not negotiate link with forced switch.
      Cause:
        Driver is unable to access certains register (especial the rx block after 0x400)
        while PHY APD (Auto Power Down) is enabled.
      Change:
        Enable device auto clock switching feature to get the MAC clock running when PHY APD is enabled.
      Impact:
        None.

  Enhancements:
  =============
  1.  Request:
        Add 5785 support for 12.2 release.
      Change:
        Make inf change to add 5785 2 part IDs.
      Impact:
        None.

  2.  Request:
        Remove driver workaround for 50610 Rev C PHY.
      Change:
        The workaround was added for 50610 A0 only, make code change to remove it.
      Impact:
        None.

  3.  Request:
        Enable APD + PLL setup for 50610 GPHY (with 5785)
      Change:
        Extend APD (Auto Power Down) + PLL clock support for 50610 GPHY.
      Impact:
        None.

  4.  Request:
        CQ40160 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  5.  Request:
        Remove CQ39763 changes in Windows XP driver.
      Change:
        There is no API for BPowMon to detect LCD off event in Windows XP.
        Driver needs to remove changes added for CQ39763.

  6.  Request:
        CQ40197 - Driver needs to remove the support of Test Chip in the final SW release
      Change:
        Make driver not to load with the test chip.
      Impact:
        With test chip, device will show "yellow bang" in device manager which is expected.


Version 12.0.0.5  Mar 20, 2009
----------------------------------------
  1.  Problem:
        CQ39191 - (5785) Link fail while device is connected back to back with force speed.
      Cause:
        When link speed is forced, auto MDIX is not enabled.
      Change:
        Modified code to enable PHY "Force auto MDIX mode"
      Impact:
        None.

  Enhancements:
  =============
  1.  Request:
        Remove 5785 support for 12.0 release.
      Change:
        Make inf change to remove 5785 2 part IDs.
      Impact:
        None.


Version 12.0.0.4A  Mar 17, 2009
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ39994 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs


Version 12.0.0.4  Mar 16, 2009
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ39864 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  2.  Request:
        CQ39763 - OEM request a LCD state trigger Link transition feature for Cilai and Taishan
      Change:
        Create a registry key in INF to let service (BPowMon) know if the OEM system has the feature
        enabled or not. When the service detects LCD OFF event, it will tell driver to start
        reverse-nway to make link at lowest speed (10 Mbps) when network is idle.
      Impact:
        None


Version 12.0.0.3  Mar 09, 2009
----------------------------------------
  1.  Problem:
        CQ39796 - doing boot code program in WinFWUpg will show error message.
      Cause:
        Driver has incorrect configuration values for EEPROM which makes driver treat EEPROM as a flash device.
        This make driver can't write correct data into EEPROM and cause checksum error.
      Change:
        Correct code error to make driver use correct configuration when EEPROM is used.
      Impact:
        None

  Enhancements:
  =============
  1.  Request:
        Do not write OTP bits if the bits have been set already.
      Change:
        Read data from OTP first and then compare the "orignal data" and "data to write",
        if the bits in "data to write" have set already, driver will skip the OTP write.
      Impact:
        None.

  2.  Request:
        CQ39716, CQ39575 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  3.  Request:
        CQ39595 - Disable CQ35234 GPHY workaround for specific OEM systems.
      Change:
        Make driver to skip CQ35234 workaround for specific OEM systems.
      Impact:
        Without CQ35234 workaround, 5784M/5764M may not assert Wake signal one the first Wake
        packet received. This happens when device is connected to some particular switches.


Version 12.0.0.2  Feb 23, 2009
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        Apply CQ37120 workaround "Extended L1 entry time to 4ms" for specific test chip.
      Chnage:
        Program reg 0x7d28 with 0x182FFFA for the device.
      Impact:
        None

  2.  Request:
        Driver needs to do register read at CPMU block (0x36xx) to return the same value
        twice before returning the read value.
      Change:
        Follow the request while handling register read at CPMU block.
      Impact:
        The workaround is applied on 57760/57780/57790 only.

  3.  Request:
        Set bit 0 in the GPHY Expansion Register 75 to address the Template issue.
      Change:
        Make sure bit_0 of expansion register 75 is set during GPHY setup.
      Impact:
        This change applys to 57760/57780/57790 only.


Version 12.0.0.1  Feb 13, 2009
----------------------------------------
  Enhancements:
  =============
  1.  Request
        CQ39443 - Ndis 5.x and 6.0 driver should have product version key set to 14.0.0 in 12.0
      Change:
        Change the product version as required.
      Impact:
        None

  2.  Request:
        CQ39522 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  3.  Request:
        CQ38522 - Enable OTP programming capbility for 57760/57780/57790
      Change:
        Implement private OIDs so that application can get access to OTP through BMAPI.
      Impact:
        None


Version 12.0.0.0  Feb 02, 2009
----------------------------------------
  1.  Problem:
        CQ38940 - 5785: BACS LoopBack-MAC and LoopBack-PHY fails in WinXP and Vista at 10H and 100H.
      Cause:
        Device should work at full duplex mode while doing loopback test and driver doesn't configure
        Ethernet MAC mode register correctly.
      Change:
        Make sure Half-duplex bit in EMAC mode register is cleared while doing loopback test.
      Impact:
        None

  Enhancements:
  =============
  1.  Request:
        CQ39188,CQ39189 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs


Version 11.23 Dec 17, 2008
----------------------------------------
  1.  Problem:
        CQ36053 - Windiag shows "Device failed to negotiate link after 15sec" during PHY reset test
      Cause:
        Some device may generate "Link Status Change" interrupt immediately after powering down GPHY.
        This causes driver to run LM_SetupPhy() in UM_DPC() for servicing GPHY interrupt, while the
        application may send another T3_OID_PHY_ON to driver for powering on GPHY. This causes two
        driver threads to access GPHY at the same time, and it may cause GPHY content programmed
        with incorrect value.
      Change:
        Disable interrupt before powering down GPHY.
      Impact:
        None

  2.  Problem:
        CQ38997 - 57780 MAC loopback will fail without connection.
      Cause:
        When ethernet cable is dettached & GPHY auto-power-down w/pll power down is enabled, GPHY
        pll would power down to save power (link aware apd mode) and stop providing clock to MAC.
        When mac loopback mode is enabled under this condition mac cannot switch to fast clock to
        complete packet transfers and therefore causes packet to drop.
      Change:
        The workaround is to disable GPHY PLL APD during MAC loopback test.
      Impact:
        None.

  Enhancements:
  =============
  1.  Request:
        CQ38677,CQ38861,CQ38863 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs


Version 11.22 Dec 05, 2008
----------------------------------------
  Enhancements:
  =============
 1. Request:
      Add support B50610m GPHY for BCM5785.
    Change:
      Added code to support B50610m GPHY for BCM5785.


Version 11.21 Nov 27, 2008
----------------------------------------
  1.  Problem:
        CQ38651 - 5784M laptop show a yellow bang in Device Manger
            after 300-400 iteration of S4 tests.
      Change:
        Apply CQ29902 workaround for this issue.
      Impact:
        Fixed a yellow bang issue.

  2.  Problem:
        CQ38740 - 5785 system:  "Driver Load and Unload " failed on WinXP.
      Cause:
        Driver had access to PHY registers right after doing GRC reset without
        waiting for bootcode finishing it's job. Driver may get PHY registers
        corrupted or get incorrect PHY registers value.
      Change:
        Do not get access to PHY registers before bootcode finishes it job.


  Enhancements:
  =============
  1.  Request:
        CQ38185,CQ38351,CQ38491,CQ38505 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  2.  Request:
        Add support for 57780 / 57790 A1 devices.
      Change:
        Make driver to keep all SW A0 workarounds for A1.

  3.  Request:
        Add GPHY Green Mode support for 57780.
      Change:
        Whenever link is at 1G and cable length is less than 10m, driver
        will enable device GPHY Green Mode for saving power.


Version 11.20  Oct 24, 2008
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ38029- Add 4 part IDs for specific OEM
      Change:
        Added new IDs
      Impact:
        None.

  2.  Request:
        Adding support for 57780 / 57790
      Change:
        Modify code to add support for 57780 / 57790.
      Impact:
        None.


Version 11.19  Oct 15, 2008
----------------------------------------
  Enhancements:
  =============
  1.  Reguest:
        Adding support for BCM5785.
      Change:
        Added two-part ID into INF file.
      Impact:
        None.


Version 11.18B  Sep 11, 2008
----------------------------------------
  Enhancements:
  =============
  1.  Request
        CQ37293 - Ndis 5.x and 6.0 driver should have product version key set to 12.8.0 in 11.7
      Change:
        Change the product version as required.
      Impact:
        None


Version 11.18  Sep 03, 2008
----------------------------------------
  1.  Problem:
        CQ37154 - OEM 5784M platform observes the same S5 WOL issue as CQ35234
      Cause:
        CQ35234 GPHY workaround was applied when system is going into S1/S3/S4, not for S5.
      Change:
        Apply CQ35234 GPHY workaround for S5 as well.
      Impact:
        None.

  Enhancements:
  =============
  1.  Request:
        CQ36843 - Add registry key to common mini-port driver in order to allow NDIS to discard VLAN tagged packets
      Changes:
        Added "DropVlanPkt" registry key to drop vlan packets when vlan is disable.
      Impact:
        None.


Version 11.17B  July 23, 2008
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ36056 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  2.  Request:
        CQ36166 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  3.  Request:
        CQ36432 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  4.  Request:
        CQ36447 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs


Version 11.17  June 19, 2008
----------------------------------------
  1.  Problem:
        CQ35947 - B5764/B5761/B5784-When setting  WOL speed to 10mb system will be come unresponsive and lose link.
      Cause:
        The CQ35234 workaround is incorrectly executed when driver is loaded with WOL speed setting as 10mb.
        There is no problem when WOL speed is set to Lowest, Auto or 100mb.
      Change:
        Correct driver's abnormal behavior and make driver to apply the CQ35234 workaround precisely.
      Impact:
        None.


Version 11.16  June 9, 2008
----------------------------------------
  1.  Problem:
        CQ35239 - 5784m stops passing traffic when running copy compare at 10 Mb half duplex and ASPM L1 w/ clkreq.
      Cause:
        The clock glitch that occurring with L0->L1->L0 transitions causes device RDMA doesn't work normally.
      Change:
        Make driver to disable device's clkreq when linked at 10H or 100H as a workaround.
      Impact:
        Resolve CQ35239.

  2.  Problem:
        CQ35234 - 5784M/5764M will not assert Wake signal one the first Wake magic packet received.
      Cause:
        When device is connected to particular switch with specific PHY at 1G bps, with wol speed
        set to lowest speed, driver will program GPHY to advertise 10M bps support and restart
        auto-negotiation while system is going from S0 to S3/S4/S5. In the meantime, 100tx or 1000t
        idle sent from the link partner can confuse the local 10M bps polarity state machine, which
        in turn can corrupt the first 10Mbps packet received.
      Change:
        Make driver workaround to reset link porlarity state machine and restart auto negotiation.
      Impact:
        Resolve CQ35234.


Version 11.15  May 12, 2008
----------------------------------------
  1.  Problem:
        CQ34962 - 5784/5764/5761 system compatibility issue on particular OEM system.
      Cause:
        When BIOS sets root-complex's and device's Max Payload Size (MPS) to 256 bytes,
        device's MPS will be incorrectly set to 128 by driver, then device will report
        ERROR_FATAL and stop DMA when it makes Memory Read and receives completion
        packets larger than 128 bytes.
      Change:
        Make driver to keep device MPS setting during initialization.
      Impact:
        Resolve CQ34962.

  Enhancements:
  =============
  1.  Request:
        CQ34973 - OEM requests to enable log options for sysetms w/ 5784M
      Change:
        Make inf changes to enable log options for OEM systems.
      Impact:
        Resolve CQ34973.


Version 11.14  April 22, 2008
----------------------------------------
  1.  Problem:
        Ensure private OID buffer is not touched until signature
        is validated.
      Cause:
        Could cause DTM failure if buffer is modified
        when signature is invalid.
      Change:
        Move setting status until after signature is validated.
      Impact:
        None

  Enhancements:
  =============
  1.  Request:
        CQ34699 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  2.  Request:
        Enable constant 500Khz MDIO interface speed regardless core clock frequency.
      Change:
        Change driver to set the enable bit in MII Mode register.
      Impact:
        The change applies to devices 5764M/5784M/5723/5761/5761E.


Version 11.13  March 16, 2008
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ34254 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs


Version 11.12  March 12, 2008
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        CQ34135 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs


Version 11.11  February 28, 2008
----------------------------------------
  Enhancements:
  =============
  1.  Request:
        Enhance the fix for CQ33858.
      Change:
         Change CPMU Clock Policy Registers to increase the Core Clock Speed before issue
         a GRC reset and restore these registers after boot code has completed initialization.
      Impact:
        Resolve CQ33858.


Version 11.10  February 24, 2008
----------------------------------------
  1.  Problem:
        CQ33858 - Device loses connection while doing load/unload test.
      Cause:
        When driver is unloaded, driver does a GRC Reset. When the link doesn't come back
        immediately, CPMU will put MAC core clock into slower speed. This makes boot code
        to be reloaed and executed slower. This also makes driver exceed waiting loop.
        Finally, GPHY register corrupted because of driver and boot-code racing condition.
      Change:
        Extend driver waiting time to make sure boot-code 2nd phase is finished.

  Enhancements:
  =============
  1.  Request:
        Add driver support back for Windows 2000.
      Change:
        Modify inf files for installing driver on Windows 2000.

  2.  Request:
        Remove CQ33808 driver workaround for 5784M/5764M/5723.
      Change:
        Remove driver workaround added in previous release.
      Impact:
        Bootcode v3.31 & slefboot patch v2.18 have the workaround to fix CQ33808.

  3.  Request:
        CQ33892 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs.

  4.  Request:
        CQ25155 - 5784M/5764M/5723/5761/5761E implementation of this CQ is
        done in hardware instead of the software implementation.
      Change:
        Activate hardware fix for this CQ in driver and not with code in
        the receive packet processing logic.
      Impact:
        New devices have hardware support for this fix that must be
        activated in the driver.


Version 11.9  February 11, 2008
----------------------------------------
  1.  Problem:
          CQ33808 - BCM5784M: System hangs when user changes Device Property with clkreq enabled.
      Cause:
          Issuing a GRC reset with clkreq enabled is causing a global chip reset and PCI-E
          completion timer timeout.
      Change:
          When ClkReq and L0s/L1 ASPM are enabled, driver will clear ClkReq enable bit before doing
          GRC reset and restore it after GRC reset.
      Impact:
          Resolve C33808.

  Enhancements:
  =============
  1.  Request:
          Remove CQ33752 driver workaround.
      Change:
          Remove driver workaround added in v11.8


Version 11.8  February 7, 2008
----------------------------------------
  1.  Problem:
        CQ33752 - Small fragments of less than 8 bytes cause transmit DMA failure.
      Cause:
        Under investigation.
      Change:
        Coalesce transmit buffers before submitting to the chip.
      Impact:
        Resolve issue for 5764M/5784M/5723/5761/5761E.


Version 11.7 January 29, 2008
----------------------------------------
  1.  Problem:
        CQ33564 - BACS MAC loopback test fails when test is running without cable.
      Cause:
        Bootcode version after v3.23 has enabled GPHY DLL Auto Power Down by default.
        When there is no cable, GPHY DLL Auto Power Down starts to work and makes test fail.
      Change:
        Change driver to disable GPHY DLL Auto-Power Down when running MAC loopback test
        and then retore GPHY DLL Auto-Power Down Bit to original value.
      Impact:
        Resolve issue and this is for 5764M/5784M/5723 B0 only.

  Enhancements:
  =============
  1.  Request:
        Add GPHY APD and GPHY DLL Auto-Power Down for 5764M/5784M/5723 B0.
      Change:
        Driver needs to read the share memory to determine how the GPHY Auto Power Down
        feature is enabled/disabled by the user.

  2.  Request:
        The GPHY workaround needs to be applied with the GPHY DLL Auto-Power Down Bit set.
      Change:
        Set GPHY DLL Auto-Power Down Bit before applying GPHY workaround and then restore
        GPHY DLL Auto-Power Down Bit to original value.
      Impact:
        This is for 5764M/5784M/5723 B0 only.


Version 11.6  January 24, 2008
----------------------------------------
  1.  Problem:
        CQ33519 - 5784M fails at external loopback test fail.
      Cause:
        Device doesn't get linked and test application can't receive enough packets during the test.
      Change:
        Disable Link Speed/Link Aware/Airplane Power Mode and avoid setting PHY trim registers
        during external loopback test.
      Impact:
        Resolve CQ33519.

  Enhancements:
  =============
  1.  Request:
        Disable Link Speed/Link Aware/Airplane Power Mode while running MAC Loopback Test for 5784M B0.
      Change:
        Make driver to disable Link Speed/Link Aware/Airplane Power Mode while running MAC loopback Test.

  2.  Request:
        Implement CQ31680/CQ32765 ClkREQ workaround for 5784M Ax revision.
      Change:
        Clear bit_16 of register 0x7d00 and clear bit_29 of register 0x68A4.

  3.  Request:
        GPHY earl-wake-dac mode must be enabled before MAC 10mb rx only mode is enabled.
      Change:
        Whenever driver issues a reset to the GPHY, GPHY early-dac-dac mode will be disabled.
        Driver needs to disable CPMU 10mb rx only mode before resetting GPHY. Then later
        driver can re-enable the 10mb rx only mode. It's for 5764M/5784M/5723 B0 only.

  4.  Request:
        Implement new GPHY Workaround for 5784M/5764M/5723 B0.
      Change:
        Driver reads workaround parameters from OTP Memory and then configures GPHY accordingly.


Version 11.5  January 11, 2008
----------------------------------------

  Enhancements:
  =============
  1.  Request:
        CQ33252 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs

  2.  Request:
        Change the Copyright information to include 2008 for all SW modules
      Change:
        Change the Copyright information to include 2008 in related files.

  3.  Request:
        Implement driver workaround for 5784M GPHY related issues.
      Change:
        Add code changes for the workaround.

  4.  Request:
        Remove driver support for Windows 2000.
      Change:
        Modify k57win32.inf to remove the ability for installing driver on Windows 2000.


Version 11.4  December 10, 2007
----------------------------------------
  1.  Problem:
        CQ32573 - Failed to resume normal speedlink after power saving mode.
      Cause:
        Device has a problem with logic that handles the automatic switching of the burst mode
        to non-burst mode when the core clock is switching from 62.5MHz to slow clock modes.
      Change:
        Disable WDMA Rx Accel mode to workaround this issue.
      Impact:
        Resolve CQ32573 issue.

  Enhancements:
  =============
  1.  Request:
        Add support for 5784M A2 devices.
      Change:
        Make driver to keep all SW A0/A1 workarounds for A2

  2.  Request:
        CQ32683,CQ32780 - Add 4 part IDs for specific OEM
      Change:
        Added new IDs


Version 11.3  November 08, 2007
----------------------------------------

  Enhancements:
  =============
  1.  Request:
        Add support for 5784M A1 devices.
      Change:
        Make driver to keep all SW A0 workarounds for A1

  2.  Request:
        Disable Link Speed Mode and Link Aware Mode while running MAC Loopback Test for 5784M A0 & A1.
      Change:
        Make driver to disable Link Speed and Link Aware mode while running MAC loopback Test.

  3.  Request:
        For CQ31702 - SW needs to Configure LED Mode default to MAC Mode instead of GPHY Mode
      Change:
        Configure LED Mode default to MAC Mode for 5784M A0 & A1.


Version 11.2  October 24, 2007
----------------------------------------
  1.  Problem:
        CQ31830 - System hangs when put it into S3 and S4 or disable the adapter with WOL disabled.
      Cause:
        When WOL is not needed, driver will power down GPHY for saving power. When GPHY powers down,
        GPHY DLL stops provinding clock to mac core and this causes memory read completion timeout.
      Change:
        Make mac core clock switching before powering down GPHY.
      Impact:
        Resolve CQ31830 issue.

  Enhancements:
  =============
  1.  Request:
        CQ31815 - Blue screen on boot if no network cable attached.

      Change:
        Remove codes that enables GPHY APD (Auto Powerdown) in driver. The GPHY APD is now handled by
        the CPMU when Link Aware is enabled.

  2.  Request:
        CQ31619 - 5784M A0 failed DMA Write Engine Lock Up when Link Speed Mode Enabled with
                  10Mb Traffic and Core clock is 1.5MHz
      Change:
        Slow down the core clock to 6.25Mhz in 10mb, Link Aware Mode or 10mb Link Speed Mode for 5784M A0.


Version 11.01  October 17, 2007
----------------------------------------
  1.  Enhancement request
      Merged 5784M code from branch to mainline.


Version 11.00  October 9, 2007
----------------------------------------
  1.  Initial release for 5784M
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.98