Filename : KADARELS.TXT
Release Notification
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 1.04A.ROM) 12-21-2009
File name : KADA104A.ROM
Base on : KADA103A.ROM
Checksum : F07A
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> Modify brightness table for SEC SLIM panels.
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 1.03A.ROM) 12-02-2009
File name : KADA103A.ROM
Base on : KADA102A.ROM
Checksum : F079
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> Modify brightness table for SLIM panels.
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 1.02A.ROM) 11-16-2009
File name : KADA102A.ROM
Base on : KADA101A.ROM
Checksum : E4C0
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> Extend thermal communication fail timer from 60sec to 300sec.
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 1.01A.ROM) 11-4-2009
File name : KADA101A.ROM
Base on : KADA100A.ROM
Checksum : DB9A
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> Extend thermal communication fail timer from 30sec to 60sec and save 80port if shutdown happens.
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 1.00A.ROM) 10-30-2009
File name : KADA100A.ROM
Base on : KADA013A.ROM
Checksum : D039
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix battery limit function (for production line AP)
Known issue:
Modified:
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 0.13A.ROM) 10-15-2009
File name : KADA013A.ROM
Base on : KADA012A.ROM
Checksum : D049
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix UUID might show default value in BIOS setup menu.
2.> Fix c52 dA3 returning error chip type.
3.> CCIC056 battery capacity display error.
Known issue:
Modified:
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 0.12A.ROM) 10-15-2009
File name : KADA012A.ROM
Base on : KADA011A.ROM
Checksum : EA9D
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix flashing ME will cause thermal communication fail shutdown.
2.> Fix can't flash ME while doing crisis.
3.> Fix EC hang if do 4sec shutdown under crisis.
Known issue:
Modified:
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 0.11A.ROM) 10-09-2009
File name : KADA011A.ROM
Base on : KADA010A.ROM
Checksum : F602
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> Modify fan table(091007)
2.> Recover turbo off function.
3.> Modify brightness table.
Add function:
1.> Add thermal communication fail shutdown if can't read temperature for 30sec.
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 0.10A.ROM) 10-02-2009
File name : KADA010A.ROM
Base on : KADA009A.ROM
Checksum : A10B
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix power led will flash while pressing easy buttons, T/P lock button under S3.
2.> Fix full charge battery LED can't light immediately if plug in AC under S3.
Known issue:
Modified:
1.> Disable debug message when power off.
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 0.09A.ROM) 09-25-2009
File name : KADA009A.ROM
Base on : KADA009A.T03
Checksum : 6A1F
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> Modify EC_MUTE behavior.
2.> Update battery parameter.
3.> Fan full on when can't get cpu temp.
Add function:
**************************************************************************
**************************************************************************
NALG0 ENE KB926 EC-FW release (Rev. 0.09A.T03) 09-23-2009
File name : KADA009A.T03
Base on : KADA008A.ROM
Checksum : B7B5
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> Modify EC_MUTE behavior.
2.> Update battery parameter.
Add function:
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.08A.ROM) 09-18-2009
File name : KADA008A.ROM
Base on : KADA007A.ROM
Checksum : B79D
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> Modify EC_MUTE behavior to follow EAPD.
2.> Modify panel ID for SW.
3.> Modify ME pin command and behavior.
Add function:
1.> Add code for supporting EC winflash.
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.06A.ROM) 09-04-2009
File name : KADA006A.ROM
Base on : KADA005A.ROM
Checksum : 8C18
Notification:
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix can't resume from S3 if enter S3 right after entering OS.
2.> Reduce the gap between real fan speed and fan speed detected by EC.
Known issue:
Modified:
1.> Modify EC common code to v56.
2.> Modify ME function.
3.> Canceled turbo mode off function.
Add function:
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.05A.ROM) 08-28-2009
File name : KADA005A.ROM
Base on : KADA004A.T10
Checksum : 8D1F
Notification:
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix BCIC027 DC only can't power on while battery over temp.
2.> Fix BCIC016 full charge led doesn't on while battery full charge bit set.
Known issue:
Modified:
1.> Modify battery parameter.
2.> Remove program led/backup led.
3.> Fan table update.
Add function:
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.04A.T10) 08-14-2009
File name : KADA004A.T10
Base on : KADA004A.T01
Checksum : CC4B
Notification:
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix program led and backup led.
2.> Adjust charging current(IREF) to fix adaptor throttling issue.
3.> Adjust adaptor protecting point to fix adaptor throttling issue.
4.> Adjust calibrate pin output to fix wrong adaptor issue.
Known issue:
Modified:
1.> Update common code to v55.
2.> Battery charge LED off while flashing.
3.> Identify UMA/SWITCHABLE by AD pin.
4.> Decrease battery SMBus communication fail time limit from 60sec to 30sec.
5.> Modify fan table.
6.> Stop charge 2sec while resuming from S3.
Add function:
1.> Add Turbo mode on/off event.
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.04A.T01) 08-10-2009
File name : KADA004A.T01
Base on : KADA004A.ROM
Checksum : 129F
Notification:
1.> Need flash EC's boot block? --> Yes
2.> Rename from KADA004A.ROM
Fixed:
Known issue:
Modified:
Add function:
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.04A ROM) 08-06-2009
File name : KADA004A.ROM
Base on : KADA003B.ROM
Checksum : 129E
Notification:
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix AC017 & AC022.
2.> Fix can't enter Crisis mode.
Known issue:
Modified:
1.> Update EC common code to v54.
2.> Update fan table.
Add function:
1.> Add ME Function.
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.03B ROM) 07-31-2009
File name : KADA003B.ROM
Base on : KADA003A.ROM
Checksum : 04D5
Notification:
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix battery OTP protection will cause system shutdown twice.
2.> Fix can't enter Crisis mode.
Known issue:
Modified:
1.> Fan Table implement. Disable Fan full on.
2.> Brightness table update.
Add function:
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.03 ROM) 07-24-2009
File name : KADA003A.ROM
Base on : KADA002B.ROM
Checksum : C19E
Notification:
1.> Need flash EC's boot block? --> Yes
Fixed:
Known issue:
Modified:
1.> BEEP# pull low under s4/s5.
Add function:
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.02 ROM) 07-17-2009
File name : KADA002B.ROM
Base on : KADA001A.T02
Checksum : C4EA
Notification:
1.> Need flash EC's boot block? --> Yes
Fixed:
1.> Fix program button no function.
2.> Fix touch pad lock no function.
3.> Fix EC_MUTE behavior.
Known issue:
Modified:
1.> Enable watchdog function.
2.> Enable Deep Sleep function.
3.> Enable Thermal over temperature shutdown.
4.> Remove CIR support.
5.> Disable thermal communication fail shutdown protection.
Add function:
**************************************************************************
**************************************************************************
NAL90/G0 ENE KB926 EC-FW release (Rev. 0.01 T02) 07-03-2009
File name : KADA001A.T02
Base on : K9BA003A.ROM
Checksum : BE55
Notification:
1.> Need flash EC's boot block? --> Yes
2.> Code Base: NCQD0 V0.03.
Fixed:
Known issue:
Modified:
1.> Modify the name, ID and version of project.
2.> Modify GPIO definition.
3.> Enable fan always full on.
4.> Disable watchdog function.
5.> Disable Deep Sleep function.
6.> Disable Thermal over temperature shutdown.
Add function:
**************************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.