platform.ini Driver File Contents (BIOS_Acer_1.10_A_AS3410_20AS3810.zip)

;The file is Insydeflash utility configuration file

[Version]
Version=00
;Insydeflash utility will display the value at top 

[FDFile]
FileName=
BackupName=

;FileName    -> Utility always load this file.
;BackupName  -> Utility will backup current BIOS to the file.

[UpdateBlock]
PatchFv=0
FileName=intel.fv
FileOffset=0
FlashSize=0
PhysicalAddress=FFF00000
FvID=945PL-A
IDErrorAction=1

;If user set PatchFv to 1, utility will go update mode.
;If user only need to update some blocks in file, please enter file offset and size
;in here. If flash size is 0, utility will update all binary in file.
;If flag in Platform_Check section is 1, utility will compare FvID with current
;platform ID. When ID comparison failed, user choose result by IDErrorAction.
;1 mean show error message box, 2 mean close utility and reboot/shutdown. 


[Platform_Check]
flag=0
PlatformName=AA
PlatformName2=BB
PlatformName3=
PlatformName4=
PlatformName5=
PlatformName6=
PlatformName7=
PlatformName8=
PlatformName9=
;This flag is the switch of comparing bios project ID with ROM file project ID.
;When flag is 1, utility will check project ID.If ID doesn't match, utility will 
;close the application. When flag is 0, utility won't check project id.
;When flag is 2, utility will check 9 platform IDs. If one is match, it will go flash.
;PlatformName -> If ROM file do not contain correct ID, user can define ID in this file.


[AC_Adapter]
flag=1
BatteryCheck=0
BatteryBound=20
;This flag is the switch of checking AC. When flag is 1, utility will check AC. If no AC
;plug in, utility will display warnning message. When flag is 0, utility won't check AC. 

[Bios_Version_Check]
flag=0

;This flag is the switch of checking Bios Version. When flag is 1, utility will 
;check Bios Version. If rom file Version is older than Bios, utility will display warnning 
;message and close application. When flag is 0, utility won't check rom file version. 

[ForceFlash]
ALL=0
BB_PEI=0
CPU_Microcode=0
Variable=0
DXE=0
EC=0
Password=0
OEM_NVS=0
Logo=0
Type#09=0
Type#08=0

;ALL  1 -> Flash all ROM part. 0 -> Resverd all protect areas.
;BB_PEI, CPU_Microcode, Variable... 
;1 -> Force flash these area if BIOS report them are protected areas. 
;0 -> Protect these area if BIOS report them are protected areas. 

[FlashComplete]
Action=2
Dialog=0
Counter=15

;Action  0 -> Do nothing, 1 -> Shut down, 2 -> Reboot
;Dialog  0 -> Do not display dialog, 1 -> Display dialog,
;        2 -> Display dialog and wait several seconds.
;If user need to reboot or shut down automaticlly in several seconds,
;user can set counter be a integer.

[UI]
Confirm=1
Silent=0
DisplayID=1
InsydeInfo=1
VersionInfo=1
GroupInfo=1
ConfirmInfo=0
OnFlashingBeep=0
OnFlashingBeepDelayTime=800
DisableMouseAndKeyboardInput=0
BeforeFlashDelayTime=0
ProgramStartToWrongMessageBox=0
GetFDFileButton=0

;Confirm 1 - > Display confirm dialog, 0 -> Do not display confirm dialog
;Silent 1 -> Silent mode, hide main dialog, 0 -> Normal mode
;DisplayID 1 -> Display BIOS ID, 0 -> Do not display BIOS ID
;InsydeInfo 1 -> Display Insyde copyright information and URL, 0 -> Do not display it
;VersionInfo 1 -> Display BIOS version, 0 -> Do not display BIOS version
;GroupInfo 1 -> Display group box, Do not display group box
;ConfirmInfo 1-> Display version and date information in confirm dialog
;OnFlashingBeep 1-> Beep on flashing, 0 ->Do not beep on flashing
;OnFlashingBeepDelayTime -> set BEEP delay time(Milliseconds)
;DisableMouseAndKeyboardInput 1-> Hook mouse and keyboard without "CTRL+ALT+DEL", 0 ->Do not Hook mouse and keyboard.
;BeforeFlashDelayTime ->If user need to delay begin flashing in several seconds, user can set delay time be a integer.
;ProgramStartToWrongMessageBox 1-> Display a wrong message box,0-> Do not display a wrong box
;GetFDFileButton 1-> Display FD file browse box, 0-> Do not display FD file browse box

[Logo]
PatchLogo=0
FileName=
GUID=

[Others]
ClearCMOS=0
FlashDevice=0
DisableCompare=0
ErrorRetry=0
;FlashDevice 0 -> default, 1 -> SPI flash part, 2 -> Non-SPI flash part.
;DisableCompare 0 -> Compare binary, 1 -> Do not compare binary, flash directly in write ROM mode.
;ErrorRetry 0-> Do not retry if found flash error. 1 -> Try to flash again if write or verify error.

[Option]
Flag=0

;Flag 0-> Auto-flash mode.
;Flag 1-> User option mode, including option, start, exit buttons.
;Flag 2-> User flash mode, including start, exit buttons.

[ApplicatonFlash]
Flag=0
Model=

;Some specific platforms need to flash by application. Only support 32bit Windows.
;Flag 1-> Flash by application
;Flag 0-> Flash by BIOS
;Model is the name of the platform.

[ReturnErrorCode]
FileNotFound=3
ErrorBeforeFlash=4

[UpdateEC]
Flag=0

;0 -> Not flash EC by BIOS. 
;1 -> Flash by BIOS now.
;2 -> Flash by BIOS after windows shutdown.

[Region]
BIOS=0
GbE=0
ME=0
DESC=0


[Log_file]
Flag=0
FileName=InsydeFlash.Log

;0 -> Not create log file
;1 -> create log file

[ReturnCodeDefinition]
RETURN_SUCCESSFUL=0
RETURN_MODEL_CHECK_FAIL=259
RETURN_USER_CONFIRM_CANCEL=1602
RETURN_AC_NOT_CONNECT=1602
RETURN_LOAD_DRIVER_FAIL=1602
RETURN_NEED_REBOOT=3010
RETURN_USER_EXIT=1602

[VARIABLE]
Flag=0
SystemManufacturer=0
BoardManufacturer=0
SystemProductName=0
SystemSerialNumber=0
Uuid=0
POSTInfo=0
Version=0
SLP=0
Setup=0
BootPriority=0
LastBootRecord=0
AcpiGlobalVariable=0
SLP2M=0
SLP2P=0
;Flag set 0 -> nothing to do, 1 -> earse variable before flash, 2 -> earse variable only
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.17