[FONT] DEFAULT=Arial,11,ANSI [TITLE] RETRY=Error message of SC-Print2005 PASS=Password CONFIG=Port configuration for SC-Print2005 CONFSUB=Advanced setup VERSION=About ADDPORT=Wizard to add SC-Print2005 Port SEARCH=Print Server Card Search SERSUB=Search Configuration [LABEL] IDC_SETUMEI01=Select the network printing method from the two below.\n\nIf printing in a local area network, select LPR or IPP. If printing in a world wide network, select IPP. IDC_SETUMEI02=Enter printer URL of the print server. IDC_SETUMEI03=A name can be assigned to the destination print port.\nPort names that already exist are not available. (Ex. LPT1)\nThe name below is used when you do not assign a name. IDC_SETUMEI04=After Clicking the "Finish" button, the SC-Print2005 port will be registered as configured below. IDC_SETUMEI05=Enter the IP address or a host name of the print server and the port name of the print server. IDC_SETUMEI06=After clicking the "Finish" button, the SC-Print2005 port will be registered as configured below. IDC_SETUMEI07=Select the Print Server Card to register the port. When Print Server Card outside of the router is registered, Click "Configuration" to register a broadcast IP address and Click "Search". IDC_SETUMEI08=Assign a broadcast IP address of the network where Print Server Card is searched. IDC_SETUMEI10=Select the way your computer connects to the Internet. IDC_TEXT_NAME=&Destination print port name: IDC_TEXT_PROXY=&Address: IDC_TEXT_NUM=Port numb&er: IDC_TEXT_URI=Printer &URL: IDC_TEXT_CONNECT=Communicating with the print server... IDC_TEXT_ADR=Printer URL: IDC_TEXT_PRINT=Destination print port name: IDC_TEXT_IP=IP address or &host name: IDC_TEXT_JCC=&Port name of the print server: IDC_TEXT_IPADD=IP address or host name: IDC_TEXT_PNAME=Port name of the print server: IDC_TEXT_PRINAME=Destination printer port name: IDC_TEXT_PRINTER=Destination printer: IDC_CNF_URI=Printer &URL: IDC_CNF_TIMEOUT=&Timeout value: IDC_CNF_SEC=Sec. IDC_CNF_PROXY=Add&ress: IDC_CNF_PORT=P&ort number: IDC_CNF_USER=User &name: IDC_CNF_PASS=Pass&word : IDC_CNF_CHUNKSIZE=&Max Chunk size: IDC_CNF_BYTE=Byte IDC_LANG=&Language: IDC_TIMEOUT=&Communication timeout [60 - 3600 seconds] IDC_VERSION01=SC-Print2005 for Windows 95/98/Me IDC_VERSION02=Version 2.0.3 IDC_VERSION03=Copyright (C) 2005-2006 silex technology, Inc. IDC_VERSION04=Copyright (C) 2005-2006 SHARP CORPORATION IDC_NAME=&User name: IDC_KEYWORD=&Password: IDC_SETUMEI11=To print, you must enter a user name and a password. IDS_BIDI_ERROR=Bi-directional communication is enabled in the configuration of the printer driver being used. Select "Disable bi-directional support for this printer" in Spool Settings of the properties of the printer because printing might fail when SC-Print2005 is used.\nDo you want to continue to print? STC_EXAMPLE=(Ex.1) http://xxx.xxx.com:631/ipp\n(Ex.2) https://xxx.xxx.com/ipp (SSL) STC_IPP_INFO=You can print securely using SSL if you specify URL with "https://". You can print using SSL when SSL is supported by the printer and the SSL setting in the printer is available. [TAB] PAGE1=Transport PAGE2=Authentication [LIST] ITEM0=IP Address ITEM1=Ethernet Address ITEM2=Model Name [COMBO] LANG0=English (U.K.) LANG1=English (U.S.) LANG2=French LANG3=German LANG4=Japanese DEFAULT=en-us [BUTTON] IDC_RETRY=&Retry IDOK=OK IDCANCEL=Cancel IDYES=&Yes IDAPPLY=&Apply IDNO=&No IDC_CHK_PROXY=Connect via &proxy server IDC_BTN_VERSION=A&bout... IDC_BTN_HIGH=A&dvanced... IDC_CHK_BASIC=U&ser authentication IDC_CHK_CHUNK=Use &Chunked Encoding IDC_BTN_VER=&About... IDC_NEXT=&Next > IDC_BACK=< &Back FINISH=&Finish IDC_JCLPR=Print by using &LPR (Line Printer Remote) IDC_JCIPP=Print by using &IPP (Internet Printing Protocol) IDC_BTN_MODEM=Connect using a &modem and telephone line IDC_BTN_LAN=Connect using a &local area network IDC_BTN_NO=Do n&ot print using a proxy server IDC_BTN_PROXY=Print usin&g a proxy server IDC_BTN_SEEK=&Search... IDC_BTN_CON=&Configuration... IDC_BTN_BROAD=&Search IDC_BTN_ADD=&Add IDC_BTN_DEL=&Delete IDC_BTN_OLD=&Set to include former Print Server Cards for searching IDC_CHK_BIDI=&Do not display the message from next timeDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.